• Title/Summary/Keyword: AR bandwidth

Search Result 42, Processing Time 0.026 seconds

Miniaturization of Aperture-Coupled RHCP Patch Antenna (개구면 결합 원형분극 패치 안테나의 소형화)

  • Park Byung-Woo;Jeong Bong-Sik
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.6 no.4
    • /
    • pp.198-205
    • /
    • 2005
  • In this paper, the miniaturization of aperture-coupled RHCP patch antenna for the GPS system is treated. Circularly polarization characteristics is implemented by truncating diagonal corners of the square patch. Antenna size is reduced by inserting four uniform slits at the patch edges, which was equivalently lengthened the surface current by meandering it, This antenna uses aperture-coupled feeding structure with crossed-slot shape in order to give easy miniaturization of RHCP patch antenna. Simulated and measured results show that $42.7\%$ lower antenna size is obtained, and also $56\%$ lower -10dB bandwidth and $38.5\%$ lower 3dB AR bandwidth are obtained. when the proposed design scheme is applied to a commercial GPS antenna structure, $42.9\%$ lower patch size and $56\%$ lower 3dB AR bandwidth compared to commercial antenna at the same frequency are obtained.

  • PDF

An Efficient QoS-Aware Bandwidth Re-Provisioning Scheme in a Next Generation Wireless Packet Transport Network (차세대 이동통신 패킷 수송망에서 서비스 품질을 고려한 효율적인 대역폭 재할당 기법)

  • Park, Jae-Sung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.1A
    • /
    • pp.30-37
    • /
    • 2006
  • In this paper, we propose a QoS-aware efficient bandwidth re-provisioning scheme in a next generation wireless packet transport network. At the transport network layer, it classifies the traffic of the radio network layer into a real time class and a non-real time class. Using an auto-regressive time-series model and a given packet loss probability, our scheme predicts the needed bandwidth of the non-real time class at every re-provisioning interval. Our scheme increases the system capacity by releasing the unutilized bandwidth of the non-real time traffic class for the real-time traffic class while insuring a controllable upper bound on the packet loss probability of a non-real time traffic class. Through empirical evaluations using the real Internet traffic traces, our scheme is validated that it can increase the bandwidth efficiency while guaranteeing the quality of service requirements of the non-real time traffic class.

Bandwidth Reservation and Call Admission Control Mechanisms for Efficient Support of Multimedia Traffic in Mobile Computing Environments (이동 컴퓨팅 환경에서 멀티미디어 트래픽의 효율적 지원을 위한 대역폭 예약 및 호 수락 제어 메커니즘)

  • 최창호;김성조
    • Journal of KIISE:Information Networking
    • /
    • v.29 no.6
    • /
    • pp.595-612
    • /
    • 2002
  • One of the most important issues in guaranteeing the high degree of QoS on mobile computing is how to reduce hand-off drops caused by lack of available bandwidth in a new cell. Each cell can request bandwidth reservation to its adjacent cells for hand-off calls. This reserved bandwidth can be used only for hand-offs, not for new calls. It is also important to determine how much of bandwidth should be reserved for hand-off calls because reserving too much would increase the probability of a new call being blocked. Therefore, it is essential to develop a new mechanism to provide QoS guarantee on a mobile computing environment by reserving an appropriate amount of bandwidth and call admission control. In this paper. bandwidth reservation and call admission control mechanisms are proposed to guarantee a consistent QoS for multimedia traffics on a mobile computing environment. For an appropriate bandwidth reservation, we propose an adaptive bandwidth reservation mechanism based on an MPP and a 2-tier cell structure. The former is used to predict a next move of the client while the latter to apply our mechanism only to the client with a high hand-off probability. We also propose a call admission control that performs call admission test only on PNC(Predicted Next Cell) of a client and its current cell. In order to minimize a waste of bandwidth caused by an erroneous prediction of client's location, we utilize a common pool and QoS adaptation scheme. In order evaluate the performance of our call admission control mechanism, we measure the metrics such as the blocking probability of new calls, dropping probability of hand-off calls, and bandwidth utilization. The simulation results show that the performance of our mechanism is superior to that of the existing mechanisms such as NR-CAT2, FR-CAT2, and AR-CAT2.

Compact Circularly Polarized Antenna with a Capacitive Feed for GPS/GLONASS Applications

  • Jeong, Seong Jae;Hwang, Keum Cheol;Hwang, Do-In
    • ETRI Journal
    • /
    • v.34 no.5
    • /
    • pp.767-770
    • /
    • 2012
  • This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual-feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are $28mm{\times}28mm{\times}4mm$, which is the most compact size among the dual-band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).

Compact Circularly Polarized Composite Cavity-Backed Crossed Dipole for GPS Applications

  • Ta, Son Xuat;Han, Jae Jin;Park, Ikmo
    • Journal of electromagnetic engineering and science
    • /
    • v.13 no.1
    • /
    • pp.44-50
    • /
    • 2013
  • In this paper, we present a circularly polarized (CP) composite cavity-backed crossed dipole antenna for global positioning system (GPS) applications. We produce the CP radiation by crossing two dipoles through a $90^{\circ}$ phase delay line of a vacant-quarter printed ring, which also has a broadband impedance matching characteristic. Two techniques, insertion of meander lines in the dipole arm and arrowhead-shaped trace at its end, are employed to reduce the sizes of the primary radiation element. The compact radiator is backed by a cavity reflector to achieve a wide CP radiation beamwidth. The proposed antenna exhibits a measured bandwidth of 1.450~1.656 GHz for a voltage standing wave ratio (VSWR) < 2 and 1.555~1.605 GHz for AR < 3-dB. At 1.575 GHz, the antenna has a gain of 7 dBic, a frontto-back ratio of 27 dB, AR of 1.18 dB, and 3-dB AR beamwidths of $130^{\circ}$ and $132^{\circ}$ in the x-z and y-z planes, respectively.

Design of a 3:1 Wideband Circular Polarizer with Multilayered Meanderline Using Hybrid Method (하이브리드 방법을 이용한 다층 미앤더선로 구조의 3:1 광대역 원편파 편파기 설계)

  • Lee, Cheol-Soo;Pack, Jeong-Ki
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.26 no.8
    • /
    • pp.730-739
    • /
    • 2015
  • In this paper, a wideband circular polarizer operating in the frequency range of 6~18 GHz is designed and fabricated using a multilayer structure with meanderlines. A T matrix expression for the unit structure, which consists of meanderline, dielectric substrate and spacer, was derived using the boundary value solution. A proposed meanderline structure was modeled as an array of unit meanderline cell in order to apply the waveguide model with PEC and PMC boundary conditions. The calculation procedures to obtain an equivalent susceptance of the unit meanderline cell using HFSS was also suggested. Using a hybrid method, which combines the T matrix with the HFSS results, and cut-and-try method, a wideband circular polarizer with low insertion loss and good AR performance was designed. The fabricated polarizer has the return loss less than -10 dB within 92 % bandwidth, the average insertion loss less than -0.24 dB, and the average AR below 2.6 dB for full 3:1 bandwidth.

A study on the characterization and traffic modeling of MPEG video sources (MPEG 비디오 소스의 특성화 및 트래픽 모델링에 관한 연구)

  • Jeon, Yong-Hee;Park, Jung-Sook
    • The Transactions of the Korea Information Processing Society
    • /
    • v.5 no.11
    • /
    • pp.2954-2972
    • /
    • 1998
  • It is expected that the transport of compressed video will become a significant part of total network traffic because of the widespread introduction of multimedial services such as VOD(video on demand). Accordingly, VBR(variable bit-rate) encoded video will be widely used, due to its advantages in statistical multiplexing gain and consistent vido quality. Since the transport of video traffic requires larger bandwidth than that of voice and data, the characterization of video source and traffic modeling is very important for the design of proper resource allocation scheme in ATM networks. Suitable statistical source models are also required to analyze performance metrics such as packet loss, delay and jitter. In this paper, we analyzed and described on the characterization and traffic modeling of MPEG video sources. The models are broadly classified into two categories; i.e., statistical models and deterministic models. In statistical models, the models are categorized into five groups: AR(autoregressive), Markov, composite Marko and AR, TES, and selfsimilar models. In deterministic models, the models are categorized into $({\sigma},\;{\rho}$, parameterized model, D-BIND, and Empirical Envelopes models. Each model was analyzed for its characteristics along with corresponding advantages and shortcomings, and we made comparisons on the complexity of each model.

  • PDF

A Study on ISAR Imaging Algorithm for Radar Target Recognition (표적 구분을 위한 ISAR 영상 기법에 대한 연구)

  • Park, Jong-Il;Kim, Kyung-Tae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.3
    • /
    • pp.294-303
    • /
    • 2008
  • ISAR(Inverse Synthetic Aperture Radar) images represent the 2-D(two-dimensional) spatial distribution of RCS (Radar Cross Section) of an object, and they can be applied to the problem of target identification. A traditional approach to ISAR imaging is to use a 2-D IFFT(Inverse Fast Fourier Transform). However, the 2-D IFFT results in low resolution ISAR images especially when the measured frequency bandwidth and angular region are limited. In order to improve the resolution capability of the Fourier transform, various high-resolution spectral estimation approaches have been applied to obtain ISAR images, such as AR(Auto Regressive), MUSIC(Multiple Signal Classification) or Modified MUSIC algorithms. In this study, these high-resolution spectral estimators as well as 2-D IFFT approach are combined with a recently developed ISAR image classification algorithm, and their performances are carefully analyzed and compared in the framework of radar target recognition.

Study on HRV Analysis in Sleep Stage Using Wavelet Transform (웨이브렛 변환을 이용한 수면상태의 HRV 분석에 관한 연구)

  • 최혜진;정기삼;이병채;김용규;안인석;주관식
    • Progress in Medical Physics
    • /
    • v.10 no.3
    • /
    • pp.141-149
    • /
    • 1999
  • This research analyzed the HRV signals by using wavelet transform to observe the activities of autonomous nervous system in a sleep state. This research also restructured the HRV signals from electrocardiogram and by using coefficient which was obtained through wavelet transform, analyzed the signals by frequency bandwidth. Then compared the analyzed results with existing frequency analyzing method using AR model techniques. The suggested wavelet coefficient from power spectrum component in the study shows a similar tendency with the results from FFT or AR model technique. Therefore, it can be found that power spectrum analyzing method by wavelet coefficient is a useful as a tool for analyzing autonomous nervous system activities using HRV signals. Since the suggested method able to clearly depict the progression of change in time zone, which was once impossible with the existing methods, it is presumed that it will be useful in other physiological signals.

  • PDF

Compact Rectangular Spiral Antenna Employing Modified Feeding Network (변형된 급전 구조를 가지는 소형 직사각형 스파이럴 안테나)

  • Lee Dong-Hyun;Kim Tae-Soo;Chun Joong-Chang
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2006.05a
    • /
    • pp.595-598
    • /
    • 2006
  • In this letter, a compact rectangular spiral antenna is proposed. Instead of a center excitation of conventional spiral antennas, the proposed antenna is adopted a modified feed network, feeding at the end of the spiral. The matching circuit of $'{\sqsupset}'$ shape is added at the feeding point. With this matching circuit, we can easily match the input impedance well, without the limit of the space. The parameter which determines the circular wave characteristic is explained, and the design guideline of the proposed antenna is presented. We design a proposed antenna operating at 9.5 GHz. Its size is only $0.6\lambda_g\times0.6\lambda_g$. The simulated bandwidth of the input impedance $(S11\leq-10)$ is 8.12% and that of $(AR\leq-3)$ is 4.62%, which is excellent characteristics as compared to its simple structure.

  • PDF