• 한국진공학회지
• /
• 제11권3호
• /
• pp.176-182
• /
• 2002

이온빔 스퍼터링을 사용하여 유리 기판위에 $TiO_2$ 박막을 증착하고 광학적, 구조적 특성을 분석한 후 실제 반사 방지막을 제작하였다. 박막 증착은 상온에서 실시하였으며 이온빔 전압을 1.2 kV 이온빔 전류 밀도를 200 $\mu\textrm{A}/\textrm{cm}^2$로 고정하였다. 방전가스로 아르곤과 산소 가스를 사용하였으며 $O_2$/Ar비를 변화시켜 박막을 증착하고 각 박막의 특성을 분석하였다. 증착된 박막은 비정질이었고 $O_2$/Ar비가 1일 때 화학량론적인 조성비를 나타내었다. 증착된 박막의 표면 거칠기는 7 $\AA$이내의 낮은 값을 보였으나 과량의 산소분위기에서는 그 값이 50 $\AA$이상으로 증가하였고 이로 인해 투과도가 감소하는 경향을 보였다. 증착된 $TiO_2$ 박막의 굴절률은 2.40-2.45값을 나타내었고.$O_2$/Ar 비가 0.25-1사이에서 높은 투과도를 나타내었다. 이온빔 스퍼터링으로 $SiO_2$/$TiO_2$6층 반사 방지막을 제작하여 가시 광선 영역에서 약 1%이하의 반사율 특성을 갖는 박막을 증착할 수 있었다.

• 정보학연구
• /
• 제8권2호
• /
• pp.53-58
• /
• 2005

In this study, we made experiments the preparation of silver halide microcrystals, physical ripening, chemical ripening, spectral sensitivity, additives and coating in order to develop medical laser scanner film which has photographic characteristic suitable for exposure to He-Ne and Ar laser. In the practice of sensitometry, the photographic material is exposed to a known quantity and quality of radiant energy, developed under standard conditions, and the densities resulting from the various exposures are then measured. The results are usually expressed in graphic form as curves, and from these curves numerical values are derived which are used to specify the characteristics of the material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 1993

We have prepared n-CdS/p-InP hetero- junction solar cells by thermal evaporation. The efficiency under the optium conditions without the grid line contact was 7.3%, and the solar cell having glid line contact with SiO AR coating was the open circuit voltage of 0.71V, the short circuit voltage current density of 15mA/cm$^2$, the fill factor of 0.73, and the efficiency of 11.5%. As result of photoresponse in 400-1000nm wavelength the cutoff of n-CdS/p-InP solar at 500nm results from absorption by the CdS \"window\" and the cutoff at 930 nm result from absorption by the InP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.158-160
• /
• 1997

WHEN IT IS REQUIRED TO CONNECT OVERHEAD TRANSMISSION LINE WITH UNDERGROUND CABLE, PREVALENT METHOD WAS TO USE CABLE HEAD TYPICALLY MADE OF LATTICE STEEL STRUCTURE. BUT IN VIEW OF THE INCREASING DEMAND THAT STEEL STRUCTURE INSTALLED IN URBAN AREA AND/OR RESIDENTIAL AREA NEED TO MATCH WITH ENVIRONMENTAL SURROUNDINGS, THE UNSHAPELY LARGE-SIZED LATTICE STEEL STRUCTURE CAN NOT BE A PROPER ONE BECAUSE THAT IT IS NOT WELCOMED BY THE RESIDENTS AND ACCORDINGLY ITS INSTALLATION TENDS TO CONFRONT WITH CIVIL PETITION. AS AN ALTERNATIVE METHOD TO SETTLE AFOREMENTIONED UNFAVOURABLE SITUATION WE MAY BE UNDER, WE AR INTENDING TO DEVELOP THE CABLE HEAD MADE OF TAPERED TUBULAR STEEL POLE AND TO PUT IT TO PRACTICAL USE. THE ADVANTAGE WE CAN TAKE OF THE TAPERED TUBULAR STEEL POLE IS THAT IT CAN BE INSTALLED IN A VERY LIMITED SPACE MAXIMIZING THE UTILITY VALUE OF THE LAND AND THAT ITS SMART SHAPE WITH COLOUR COATING IN CONSIDERATION OF AESTHETIC AESTHETIC CAN BE IN GOOD HARMONY WITH THE SURROUNDINGS.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.287-291
• /
• 2008

Reactively magnetron sputtered TiN films were deposited on Si wafers under varying bias voltage and characterized by X-ray diffraction, field-emission scanning electron microscopy and Nanoindentation. The films deposited under an Ar + $N_2$ atmosphere exhibited a mixed (200)-(111) orientation with a strong (200) texture, which subsequently changed to a strong (111) texture with increasing bias voltage. The changes in texture and grain size of the TiN thin films are due to one or a combination of factors such as strain energy, surface free energy, surface diffusivity and adatom mobility. The influence of each factor depends on the processing conditions. The average deposition rate and grain size were calculated from FE-SEM images of the films indicating that the deposition rate was lower at the films deposited under bias voltage.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.253-254
• /
• 2018

In the construction industry, a variety of Root-Resistance Waterproofing Sheets ar being developed and studied. However, defects still occur in the sheet. In this study, the performance of the navigation is studied by Root-Resistance. As a result of the test, no piercing or penetration marks were found by root in all the specimens.

• 반도체디스플레이기술학회지
• /
• 제11권4호
• /
• pp.1-6
• /
• 2012

Keeping the polarization direction of the projection light unchanged is of crucial importance for high quality of images on a double-screen 3D projection display system. It has been found that the deposition of oxide layers on the surfaces of scattering polarizer film results in an improvement of polarization maintenance property of the film. The secondary image formed on the front screen by the light scattered from the rear screen decreases by 30% through the application of oxide layers on both surfaces of the screen. Since the oxide layer can also be used as an anti-reflection (AR) coating of the film, this method is very effective for the projection display applications.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.299-304
• /
• 2008

Catenary and Pantograph are a power supply devices for electric trains and shall be steadily contacted. Rail catenary must be installed precisely and managed for stable train operations. But external factors such as weathers, nature, etc., or aging affect catenary geometry. Changed catenary height causes high voltage spark or instant electric disconnection. Big spark and disconnection damage pantograph shoe and catenary coating and might interrupt rail operations. To prevent a big scale spark or electric disconnection catenary maintenance shall be required with catenary geometry measurement systems. In this paper, we describe the development of catenary height and stagger measurement system. The catenary height and stagger measurement system uses Acuity company's AR4000 Range Finder for distance measurement and AccuRange Line Scanner for degree measurement. This system reports suspicious overhead line sections with excessive height and stagger variance.

• 통합자연과학논문집
• /
• 제6권4호
• /
• pp.211-214
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that HF treatment is not desirable for the synthesis of a high quality PEDOT thin film via vapor phase polymerization method. Rather, sole treatment with plasma noticeably improved the quality of APS-SAM on glass surface. As a result, a highly dense and smooth PEDOT thin film was grown on uniform oxidant film-coated APS monolayer surface.

• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.9-14
• /
• 1999

삼파장 형광등의 제작에서 문제가 되는 것은 원하는 목표 색을 맞추기 위하여 혼합하는 세 가지 형광물질의 혼합비율이다. 한 형광체의 광 스펙트럼이 약간 변형되거나, 공정변수에 의하여 변경되거나, Ar과 Kr 같은 불활성가스의 스펙트럼이 혼재하거나 또는 재래 할로인산칼슘이 공존할 경우 원하는 정확한 색을 찾기가 매우 힘들어지게 된다. 이 연구에서는 원하는 목표 색을 빠르게 찾는 방법을 연구하였다. 세 개의 각각의 단일색의 형광등과 3색을 서로 다른 비율로 혼합한 형광등을 만들고 각각의 스펙트럼을 측정한 후 이로부터 알곤과 수은의 스펙트럼을 빼서 변형 색 좌표를 얻었다. 이 변형 색 좌표로부터 적생에 대한 청색과 녹색의 광속비를 그의 무게 비에 대하여 도시하여 무게 대 광속비의 관계를 구하였다. 이 관계식을 이용하여 생산라인에서 삼파장 형광체의 단일 도포 및 할로인산칼슘을 1차로 도포하는 2중 도포를 실시하여 목표색을 조합해본 결과 만족할만한 결과를 얻었다.