• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1044-1055
• /
• 1994

The preparation of ZrC/SiC mixed powders from $ZrSiO_4/C$ and $ZrSiO_4/Al/C$ systems was attempted in the temperature range below $1600^{\circ}C$ under Ar or $Ar/H_2$ gas flow(100-500ml/min). The formation mechanism and kinetics of ZrC/SiC were suggested and the resultant powders were characterized. In $ZrSiO_4/C$ system, ZrC and SiC were formed by competitive reaction of $ZrO_2(s)$ and SiO(g) with carbon at temperature higher than $1400^{\circ}C$. The apparent activation energy for the formation of ZrC was approximately 18.5kcal/mol($1400-1600^{\circ}C$). In $ZrSiO_4/Al/C$ system, ZrC was formed by reaction of ZrO(g) with Al(l, g) and carbon at temperature higher than $1200^{\circ}C$, and SiC was formed by reduction-carbonization of SiO(g) with Al(l, g) and carbon at temperature higher than $1300^{\circ}C$. The products obtained at $1600^{\circ}C$ for 5h consisted of ZrC with lattice constant of $4.679{\AA}$ and crystallite size of $640{\AA}$, and SiC with lattice constant of $4.135{\AA}$ and crystallize size of $500{\AA}$. And also, the mean particle size was about $21.8{\mu}m$.

• Elastomers and Composites
• /
• v.34 no.2
• /
• pp.128-134
• /
• 1999

Steel tire cords were coated via RF plasma polymerization of acetylene and butadiene gas in order to enhance adhesion to rubber compounds. Adhesion of tire cords was measured by TCAT and T-test as a function of type of gas, plasma powder, treatment time, gas pressure and Ar gas etching. Some samples were subjected to aging study in distilled water at $80^{\circ}C$ for a period of 7 days. After testing, tire cords were analysed by SEM to elucidate the adhesion mechanism. The highest adhesion values were obtained at 20W, 2min and 25mtorr for acetylene plasma polymerization, and l0W, 4min, 25mtorr for butadiene plasma polymerization. However, Ar plasma etching did not affect adhesion, while the adhesion of tire cords increased rather than decreased, contrary to expectations. It was not possible to elucidate failure mode by SEM, owing to the rough surface of the tire and the thin plasma polymer coating layer.

• Journal of Life Science
• /
• v.30 no.9
• /
• pp.813-818
• /
• 2020

The archaeal clusters of orthologous genes (arCOG) algorithm, which identifies common genes among archaebacterial genomes, was used to identify conservative genes among 168 archaebacterial strains. The numbers of conserved orthologs were 14, 10, 9, and 8 arCOGs in 168, 167, 166, and 165 strains, respectively. Among 41 conserved arCOGs, 13 were related to function J (translation, ribosomal structure, and biogenesis), and 10 were related to function L (replication, recombination, and repair). Among the 14 conserved arCOGs in all 168 strains, 6 arCOGs of tRNA synthetase comprised the highest proportion. Of the remaining 8 arCOGs, 2 are involved in reactions with ribosomes, 2 for tRNA synthesis, 2 for DNA replication, and 2 for transcription. These results showed the importance of protein expression in archaea. For the classes or orders having 3 or more members, genomic analysis was performed by averaging the distance values of the conservative arCOGs. Classes Archaeoglobi and Thermoplasmata of the phylum Euryarchaeota showed the lowest and the highest average of distance value, respectively. This study can provides data necessary for basic scientific research and the development of antibacterial agents and tumor control.

• Economic and Environmental Geology
• /
• v.19 no.3
• /
• pp.231-237
• /
• 1986

Samples of porphyries, andesites, decites and sandstones were collected from 14 sites in order to study paleomagnetism and to determine K-Ar age in Guryongpo area. K-Ar age dating indicates that porphyries and volcanic rocks formed 41.7 and 22.7~19.4Ma, respectively. The mean direction of remanent magnetization for each site was generally well grouped after alternating field demagnetization. Both normal and reversed directions are present. The mean magnetic direction of the porphyries of Late Eocene and that of the volcanic rocks of Late Oligocene to Early Miocene have similar, easterly declinations. Overall magnetic direction is $Dm=43.8^{\circ}$, $Im=53.5^{\circ}$, ${\alpha}95=12.2^{\circ}$. the reliability of the observed paleomagnetic directions is ascertained by the presence of normal and reversed polarities. This is also conformed by the similarity of the declinations of the normal and reversed polarities. Observed easterly declinations in this area are attributed to local clockwise rotation of the land mass by approximately 40~50 degrees since early Miocene.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.3
• /
• pp.383-393
• /
• 2020

The corrosion behavior of Hastelloy C-276 was investigated to identify its applicability for carbon-anode-based oxide reduction (OR), in which Cl₂ and O₂ are simultaneously evolved at the anode. Under a 30 mL·min^-1 Cl₂ + 170 mL·min^-1 Ar flow, the corrosion rate was less than 1 g·m^-2·h^-1 up to 500℃, whereas the rate increased exponentially from 500 to 700℃. The effects of the Cl₂-O₂ composition on the corrosion rate at flow rates of 30 mL·min^-1 Cl₂, 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂, and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂ with a constant 170 mL·min^-1 Ar flow rate at 600℃ was analyzed. Based on the data from an 8 h reaction, the fastest corrosion rate was observed for the 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂ case, followed by 30 mL·min^-1 Cl₂ and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂. The effects of the chlorine flow rate on the corrosion rate were negligible within the 5-30 mL·min^-1 range. A surface morphology analysis revealed the formation of vertical scratches in specimens that reacted under the Cl₂-O₂ mixed gas condition.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.67-73
• /
• 1998

In this paper, the electron swarm parameters in the 0.5% and 0.2% SF\ulcorner+Ar mixtures are measured by time of flight method over the E/N(Td) range from 30 to 300(Td). The measurements have been carried out by the double shutter drift tube with variable drift distance from the cathod. A two-term approximation of the boltzmann equation analysis and Monte Carlo simulation have been also used to study electron transport coefficients. We have calculated W, $ND_L,\;ND_T,\;\alpha,\;\eta,\;\alpha-\eta$, and the limiting breakdown electric field to gas mixtures ratio in pure $SF_6$+Ar mixtures. The electron energy distribution function has been analysed in $SF_6$+Ar mixtures at E/N : 200(Td) for a case of the equilibrium region in the mean electron energy. The measured results and the calculated results have been compared each other.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.559-563
• /
• 2006

The growth responses of six bacterial strains exposed to materials extracted from turmeric (Curcuma longa) rhizomes were examined using impregnated paper disk agar diffusion. Methanol extracts of turmeric rhizomes exhibited strong inhibitory activity against Clostridium perfringens and weak inhibitory activity toward Escherichia coli at 5 mg/disk. However, in tests conducted with Bifidobacterium adolescentis, B. bifidum, B. longum, and Lactobacillus casei, the methanol extract showed no inhibitory response. The biologically active constituent isolated from the turmeric rhizomes extracts was characterized as ar-turmerone using various spectroscopic analyses including EI-MS and NMR. The responses varied according to the dosage, chemicals, and bacterial strain tested. At 2 and 1 mg/disk, ar-turmerone strongly inhibited the growth of C. perfringens and moderately inhibited the growth of E. coli without any adverse effects on the growth of four lactic acid-bacteria. Of the commercially available compounds originating from turmeric rhizomes, curcumin exhibited strong and moderate growth inhibition against C. perfringens at 2 and 1 mg/disk, respectively, and weak growth inhibition against E. coli at 1 mg/disk. However, little or no activity was observed for borneol, 1,8-cineole, and sabinene against all six bacteria strains tested. The observed inhibitory activity of the turmeric rhizome-derived curcumin and ar-turmerone against C. perfringens and E. coli demonstrate one of the important pharmacological activities of turmeric rhizomes.

• KSBB Journal
• /
• v.27 no.5
• /
• pp.308-312
• /
• 2012

Argon-plasma jet (Ar-PJ) is generated by ionizing Ar gas, and the resulting Ar-PJ consists of a mixture of neutral particles, positive ions, negative electrons, and various reactive species. Although Ar-PJ has been used in various biomedical applications, little is known about the biological effects on cells located near the plasma-exposed region. Here, we investigated the effects of the Ar-PJ on actin cytoskeleton of mouse embryonic fibroblasts (MEFs) in response to indirect as well as direct exposure to Ar-PJ. This Ar-PJ was generated at 500 mL/min of flow rate and 100 V electric power by our device mainly consisting of electrodes, dielectrics, and a high-voltage power supply. Because actin cytoskeleton is the key cellular machinery involved in cellular movement and is implicated in regulation of cancer metastasis and thus resulting in a highly desirable cancer therapeutic target, we examined the actin filament architectures in Ar-PJ-treated MEFs by staining with an actin-specific phalloidin labeled with fluorescent dye. Interestingly, the Ar-PJ treatment causes destabilization of actin filament architectures in the regions indirectly exposed to Ar-PJ, but no differences in MEFs treated with Ar gas alone and in untreated cell control, indicating that this phenomenon is a specific cellular response against Ar-PJ in the live cells, which are indirectly exposed to Ar-PJ. Collectively, our study raises the possibility that Ar-PJ may have potential as anti-cancer drug effect through direct destabilization of the actin cytoskeleton.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.184.2-184.2
• /
• 2013

대기압 플라즈마와 생체용액과의 상호작용은 Bio-medical 분야에서 주목 받고 있다. 대기압 플라즈마는 전자온도가 고온 플라즈마 보다 상대적으로 낮기 때문에 생체에 적용하기가 적합하다. 따라서 플라즈마가 세포에 미치는 영향을 관측하기 위해서 대기압 플라즈마를 이용하여 생체용액과의 반응을 살펴보고자 한다. Ar gas를 이용하여 플라즈마를 발생시켜 생체용액 표면을 처리하고 OES (Optical Emission Spectroscopy)을 이용해 방출 선을 조사했다. Ar 기체를 이용한 대기압 플라즈마를 사용하여 다른종류의 용액내의 OH Radical Density를 측정하였다. 용액으로는 DI (deionized) water 와 PBS (1x phosphate buffered saline)를 사용하였다. Ar gas를 200 sccm ($cm^3/min$) 으로 흐르게 하였을 때, DI water의 OH Radical Density 는 $4.33{\times}10^{16}cm^{-3}$ 으로 측정되었으며, 자외선 흡수분광법으로 측정한 완충용액인 PBS의 OH Radical Density 측정값은 $1.87{\times}10^{16}cm^{-3}$ 이다. 이런 특성을 기반으로, PBS 용액내의 H460 (Lung Cancer Cell) 와 L132 (Lung Normal Cell)을 깊이와 시간에 따라 대기압 플라즈마로 처리하여 cell의 변화를 보았다. 실험 각각의 조건은 깊이를 2 mm, 4 mm, 6 mm이며 시간은 10 sec, 30 sec, 60 sec 로 설정하였다. 표면으로부터의 깊이가 2 mm, 4 mm, 6 mm 일때 의 OH Radical Density는 각각 $1.87{\times}10^{16}cm^{-3}$, $0.5{\times}10^{16}cm^{-3}$, 0으로써 용액이 깊어질수록 OH Radical Density가 감소함을 볼 수 있다. OH radical density가 높은 2 mm 에서, 처리한 시간이 길어질수록 Cell 은 영향을 많이 받음을 관찰 할 수 있었다. H460 이 L132 보다 플라즈마에 영향을 많이 받음을 확인하였다. 특성변화를 알아보기 위하여 raman spectroscopy, flow cytometry, electron spin resonance로 측정한다.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.269-274
• /
• 2015

In this experiment, post-nitriding treatment was performed at $400^{\circ}C$ on AISI 316 stainless steel which was plasma carburized previously at $430^{\circ}C$ for 15 hours. Plasma nitriding was implemented on AISI 316 stainless steel at various gas compositions (25% $N_2$, 50% $N_2$ and 75% $N_2$) for 4 hours. Additionally, during post nitriding Ar gas was used with $H_2$ and $N_2$ to observe the improvement of surface properties. After treatment, the behavior of the hybrid layer was investigated by optical microscopy, X-ray diffraction, and micro-hardness testing. Potentiodynamic polarization test was also used to evaluate the corrosion resistance of the samples. Meanwhile, it was found that the surface hardness increased with increasing the nitrogen gas content. Also small percentage of Ar gas was introduced in the post nitriding process which improved the hardness of the hardened layer but reduced the corrosion resistance compared with the carburized sample. The experiment revealed that AISI 316L stainless steel showed better hardness and excellent corrosion resistance compared with the carburized sample, when 75% $N_2$ gas was used during the post nitriding treatment. Also addition of Ar gas during post nitriding treatment degraded the corrosion resistance of the sample compared with the carburized sample.