• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.174-177
• /
• 2003

$Cl_2$ 플라즈마를 이용한 BLT 박막의 식각에서 Ar 가스의 첨가에 따른 식각 속도, 선택비 및 식각 형상의 변화에 대하여 관찰하였다. BLT 박막의 식각 속도는 100% Ar 플라즈마에서 100 % $Cl_2$ 플라즈마에서의 식각 속도보다 약 1.5배정도 빨랐으며, 80% Ar/20% $Cl_2$ 조건에서 $503{\AA}/min$ 최대 식각의 최대 시각 속도를 얻었다. RF 전력과 직류 바이어스 전압을 증가함에 따라 식각 속도는 증가하였으며, $Ar/Cl_2$ 플라즈마의 식각 속도가 $Cl_2$ 플라즈마의 식각 속도 보다 높았다. 식각 공정 변수의 변화에 의한 플라즈마 변수가 BLT 식각 속도에 미치는 영향을 관찰하기 위하여 LP(Lanmuir porbe)와 OES(optical emission spectroscopy)분석을 수행하였다. Ar 첨가량이 증감함에 따라 LP 분석에서 전자의 온도는 증가하였으나 전자밀도는 감소하였다. 이는 Ar의 이온화 준위가 Cl 보다 높기 때문에 이온화 윷이 낮아지기 때문으로 판단된다, 또한, OES 분석에서 Ar 첨가량이 증가함에 따라 Cl 원자의 부피 밀도는 감소하였다. Ar 첨가에 의한 BLT 박막의 식각 속도의 변화와 LP 및 OES 분석을 고려하면, BLT 박막은 화학적 식각의 도움을 받는 무리적 식각에 의하여 식각됨을 확인하였다,

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.1-18
• /
• 2022

New Fabrication Facility (FAB) construction is performed with Building Information Modeling (BIM) based design. The BIM design data keep updated during the FAB construction. To improve fast-track construction management, a Fabrication Facility Augmented Reality (FABAR) was developed. This study introduces a FABAR system development process and shows performance evaluation results of the FABAR prototype system. The FABAR is implemented with three major modules: Augmented Reality (AR) visualization unit (Room-box) to transfer big BIM data to AR data, AR registration and tracking unit to match AR with real scape and to keep AR coordination in real, and AR data management unit to enhance usability. The prototype performance results were as follows: visualization of design BIM data via AR within 24 hours, precise AR registration and tracking registration, and appropriate usability to support FAB construction management at site. The results indicate that the FABAR is applicable for FAB construction management. Especially, the BIM data transformation method using Room-box in this study signifies a new construction management approach using fluctuating BIM design data in the fast track construction condition.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.371-376
• /
• 1996

Au films with a thickness around 1600 $\AA$ were deposited onto glass at room temperature by ion beam sputtering with a 5 cm cold-hollow ion gun at pressure $1\times 10^{-6}-1\times 10^{-5}$ Torr. Irradiation of the Au deposited samples was carried out at pressure of $7\times 10^{-6}$ Torr. For the sputter depositions, $Ar^+$ ion energy was 1 keV, and the current density at the substrate surface was 15 $\mu$A/$\textrm{cm}^2$. Effects of 1 keV $Ar^+$ ion dose($I_d$) between $1\times 10^{16}\; and\;2\times 10^{17}\;Ar^+\textrm{cm}^{-2}$on properties such as crystallinity, surface roughness and adhesion, etc. of the films have been investigated. The Au films sputtered by $Ar^+$ ion beam had only (111) plane and the X-ray intensity of the films decreased with increase of $I_d$. The thickness of Au films reduced with Id. $R_{ms}$ surface roughness of the films increased from 16 $\AA$ at as-deposited to 1118 $\AA$ at ion dose= $2\times 10^{17}\;Ar^+\textrm{cm}^{-2}$. Adhesion of Au film on sputtered at $I_d$= $2\times 10^{17}\;Ar^+\textrm{cm}^{-2}$ was 9 times greater than that of Au film with untreated, as determined by a scratch test.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.232-232
• /
• 2011

투명전도산화물에 대한 연구가 많이 이루어지고 있으며, 최근 Ga이 도핑된 ZnO의 연구가 많이 되고 있다. 투명전도산화물은 태양전지, 평면디스플레이와 같은 다양한 분야에 응용이 가능하다. 본 연구에서는 RF magnetron sputtering을 이용하여 Ar gas 유량 변화에 따른 GZO 박막을 연구하였다. 기판으로는 유리기판을 사용하였으며, 전기적, 광학적, 구조적인 특성을 조사하였다. 박막의 증착시 초기 압력은 $2.0{\times}10^{-6}$Torr 이하로 하였으며, 증착온도는 상온으로 고정하여 증착하였다. 기판은 Corning 1737 유리 기판을 사용하였고, GZO 타겟은 ZnO : Ga 분말이 각각 97 : 3 wt.%로 소결된 타겟을 사용하였다. Ar 유량변수는 20, 40, 60, 80 sccm으로 변화를 주었다. 유리기판에 증착된 모든 GZO박막은 약 200 nm의 두께로 증착되었으며 모든 GZO 박막에서 85%이상의 투과율을 나타내었다. Ar 유량이 적을수록 투과율을 증가하였으며, 광학적 밴드갭 또한 증가하였다. 공정별로 제작된 모든 GZO박막에서 (002)면의 배향성이 관찰되었고, Ar 유량이 적을수록 박막의 결정성은 향상되었다. Hall 측정 결과 Ar 유량이 20 sccm일 때 전기비저항 $3.46{\times}10^{-3}{\Omega}cm$, 전하의 농도 $3.832{\times}10^{-20}\;cm^{-3}$, 이동도 $4.7cm^2V^{-1}s^{-1}$로 전극으로서의 특성을 나타내었다. GZO 박막의 경우 Ar 유량이 적었을 때 결정성이 높아지고, 전극 특성이 더 우수한 것을 확인할 수 있었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.191-198
• /
• 2020

In this study, we proposed a real-time ECG analytical method for predicting stress and dangerous heart condition using the ECG signal in playing AR/VR device. A real-time diagnosis is used as R-R interval based HRV(:Heart rate variability), BPM(:Beats Per Minitue) and autonomic nervous research with through mapping method of two-dimensional planes. The ECG data were analyzed every 5 minutes and derived from autonomic nervous system diagnosis.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.483-488
• /
• 1999

The optimal mixing condition of four components gas(Ne,Xe,He,Ar) in PDPs was caculated by a numerical simulation method. The dominated reactions in which $Xe^*(^3P_1)$ is produced and decays were investigated in three components gas (Ne,Xe,He) and our new components gas (Ne,Xe,He,Ar). A peak point of $Xe^*$ density appears in the range of 0.1% to 2% of Ar mixture ratio. The results of simulation show that the direct exitation of Xe by electrons has the greatest influence on the inceasing $Xe^*$ density in both gas mixtures.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.37 no.1
• /
• pp.29-43
• /
• 2012

We design a DEA-AR model using multiple regression analysis with new methods which limit weights. When there are multiple input and single output variables, our model can be used, and the weights of input variables use the regression coefficient and coefficient of determination. To verify the effectiveness of the new model, we evaluate the efficiency of the Regional Corporations in Korea. Accordance with statistical analysis, it proved that there is no difference between the efficiency value of the DEA-AR using AHP and our DEA-AR model. Our model can be applied to a lot of research by substituting DEA-AR model relying on AHP in the future.

• International Journal of Advanced Culture Technology
• /
• v.12 no.1
• /
• pp.262-269
• /
• 2024

The "AR Campus Diary" project innovates in the realm of art through integrating augmented reality (AR) with interactive storytelling, fostering personal and interpersonal development through artistic expression. This artistic endeavor metaphorically represents the growth and fruition of individual stories, facilitated by a series of progressive art activities that emphasize continual interaction between self and others. Set against the backdrop of a university campus, the project employs AR markers designed to unfold stories in phases through a dedicated application, allowing participants to experience and influence the narrative uniquely. Diverging from traditional film editing techniques, "AR Diary" offers viewers the autonomy to navigate through story segments of their choosing, marking a departure from conventional cinematic storytelling by leveraging marker-based plot progression. This project not only showcases the fusion of technology and art but also pioneers a participatory form of art education based on engagement and play.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.1
• /
• pp.73-81
• /
• 2005

K-Ar ages have been determined for the submarine basalts dredged from the P2 and P3 segments of the Phoenix Ridge, Drake Passage, Antarctica, for better understanding on the extinction of seafloor spreading. At the P3 segment, the K-Ar ages of the rifted ridge basalts are 3.5-6.4 Ma, and those for the axial seamount basalts are 1.5-3.1 Ma. The K-Ar ages for the basalts at the rifted ridge and axial central high in the P2 segment are 2.1 and 1.4-1.9 Ma, respectively. We suggest that the extinction of seafloor spreading at the P3 and P2 segments occurred at 3.3 and 2.0 Ma, respectively, on the basis of ridge structure and formation time of basalts. This result favors a stepwise extinction model rather than a simultaneous one on the extinction of the Phoenix Ridge.

• International Journal of Safety
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2004

This study discusses frequency analysis based on autoregressive (AR) time series model, and the characterization of surface quality in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlations between the fiber pull-out and AR model coefficients are then established.