• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.163-176
• /
• 2010

We report twenty data for early lavas erupted during the initial period of formation of Jeju Island on the basis of review on 539 data of whole-rock greochemistry and $^{40}Ar/^{39}Ar$ age dating out of mainly core samples from 69 boreholes drilled in the lower land since 2001 and 66 outcrop sites. Out of 69 boreholes, the early lava flow units are identified from samples collected from Beophocheon (EL 235 m, 210 m deep), Donnaeko (EL 240 m, 230 deep), Donghong-S (EL 187 m, 340 m deep), 05Donghong (EL. 187.6 m, 340 m deep), Dosoon (EL 305 m, 287 m deep), Sangye (EL 230 m, 260 m deep), Mureung-1 (EL 10.2 m, 160 m deep), and Gapa (EL 17.5 m, 92 m deep), which are located in the southern and southwestern portion of Jeju Island. While, the well-known outcrops from Sanbangsan, Wolrabong, Wonmansa, and Kagsubawi are also reconfirmed. $^{40}Ar/^{39}Ar$ age dating results of these lavas range from 1 Ma to 0.7 Ma, indicating that the data can be useful to constrain on age and geochemical characteristics of early lava effusion period in the formation of Jeju Island. Especially, samples with trachybasalt in composition collected from 143 m to 137 m, and from 135 m to 123 m below ground surface at 05Donghong hole have the oldest ages, $992\pm21$ Ka and $988\pm38$ Ka, respectively. This study suggests that in Jeju Island the first lava with trachybasalt in composition may have effused around 1 Ma ago, and the effusion style and chemical compositions of lavas must have changed to the formation of lava domes with trachyte-trachyandesite-basaltic trachyandesite and the eruption of lavas with alkali basalt and trachybasalt intermittently during the period from 0.9 Ma to 0.7 Ma ago. It also indicates that the initial lava flows below the ground are intercalated with or underlain by the Seoguipo Formation except for several exposed domal structure areas such as Sanbangsan and Kagsubawi, implying that the early lava effusion may have intermittently and sporadically occurred with nearby hydrovolcanism and sedimentation.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.1-9
• /
• 2014

UN-REDD (United Nations programme on Reducing Emissions from Deforestation and forest Degradation in Developing Countries) and AR-CDM (Afforestation/Reforestation-Clean Development Mechanism) is currently being emerged as one of important mechanism to reduce carbon dioxide in relation to the deforestation. Discussion on North Korea as UN-REDD/AR-CDM project target continues with a view to preventing deforestation and to securing CER(certified emission reduction) for South Korea. The forests in Mt. Baekdu are degraded, deforestation is occurred, nevertheless, portion of forested area is still high, where both REDD and AR-CDM investment potential are quite high. Accordingly, this study is intended to explore a simultaneous registration potential to UNREDD/AR-CDM for Mt. Baekdu although separate registration to UN-REDD or AR-CDM has already gained worldwide recognition as a typical method in the process of GHG (Greenhouse Gas) reduction project. The results indicate that selecting UN-REDD or AR-CDM in accordance with sub-watershed forest condition could capture 53.2% more carbon dioxide than REDD alone and 21.9% more than AR-CDM alone. It is anticipated that this research output could be used as a realistic evidence to introduce carbon sequestering project in accordance with sub-watershed forest condition.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.144-157
• /
• 2022

Noble gases, which are chemically inert and behave conservatively in marine environments, have been used as tracers of physical processes such as air-sea gas exchange, mixing of water masses, and distribution of glacial meltwater in the ocean. For precise measurements of Ne, Ar, and Kr, we developed a mass spectrometric system consisting of a quadrupole mass spectrometer (QMS), a high vacuum preparation line, an activated charcoal cryogenic trap (ACC), and a set of isotope standard gases. The high vacuum line consists of three sections: (1) a sample extraction section that extracts the dissolved gases in the sample and mixes them with the standard gases, (2) a gas preparation section that removes reactive gases using getters and separates the noble gases according to their evaporation points with the ACC, and (3) a gas analysis section that measures concentrations of each noble gas. The ACC attached to the gas preparation section markedly lowered the partial pressures of Ar and CO₂ in the QMS, which resulted in a reduced uncertainty of Ne isotope analysis. The isotope standard gases were prepared by mixing ²²Ne, ³⁶Ar, and ⁸⁶Kr. The amounts of each element in the mixed standard gases were determined by the reverse isotope dilution method with repeated measurements of the atmosphere. The analytical system achieved precisions for Ne, Ar, and Kr concentrations of 0.7%, 0.7%, and 0.4%, respectively. The accuracies confirmed by the analyses of air-equilibrated water were 0.5%, 1.0%, and 1.7% for Ne, Ar, and Kr, respectively.

• The Korean Journal of Applied Statistics
• /
• v.18 no.1
• /
• pp.43-56
• /
• 2005

In this study, a robust estimation method for the first-order autocorrelation coefficient in the time series model following AR(l) process with additive outlier(AO) is investigated. We propose the L-type trimmed least squares estimation method using the preliminary estimator (PE) suggested by Rupport and Carroll (1980) in multiple regression model. In addition, using Mallows' weight function in order to down-weight the outlier of X-axis, the bounded-influence PE (BIPE) estimator is obtained and the mean squared error (MSE) performance of various estimators for autocorrelation coefficient are compared using Monte Carlo experiments. From the results of Monte-Carlo study, the efficiency of BIPE(LAD) estimator using the generalized-LAD to preliminary estimator performs well relative to other estimators.

• The Korea Journal of Herbology
• /
• v.21 no.2
• /
• pp.77-85
• /
• 2006

Objectives : We investigated the effects of Coptidis Rhizoma and Aconiti Lateralis Preparata Radix on the LPS(Lipopolysaccharide) ICV(intracerebroventricular) injection. Methods : We measured plasma corticosterone level and rectal temperature in mice induced by I.C.V. injection of LPS (100ng/mouse). Results : The results were as follows.. 1. The plasma corticosterone levels in CR-1(0.5g/kg), CR-2(1.0g/kg), CR-3(3.0g/kg) were not decreased significant comparing with the control group.(P<0.05) 2. The plasma corticosterone level in AR-1(0.5g/kg) was decreased significant comparing with the control group.(P<0.05), but AR-2(1.0g/Kg) and AR-3(3.0g/kg) were not decreased significant comparing with the control group.(P<0.05). 3. The rectal temperature in CR-1(0.5g/kg), CR-2(1.0g/kg), CR-3(3.0g/kg) was decreased significant comparing with the control group.(P<0.05) 4. The rectal temperature in AR-1(0.5g/kg), AR-2(1.0g/kg), AR-3(3.0g/kg) was not decreased significant comparing with the control group.(P<0.05) Conclusion : These data revealed that Rhizoma Coptidis might have no significant effect on inflammation stress and Aconiti Lateralis Preparata Radix(0.5g/kg/mouse) might have significant effect on inflammation stress.

• Journal of Korea Foundry Society
• /
• v.32 no.6
• /
• pp.276-283
• /
• 2012

This study presents the results on the changes of crucible thermal conductivity and inflow of Ar, and constructed the mathematical model about heat transfer into furnace. As process variables, simulation model was designated thermal conductivity of crucible to $0.5W{\cdot}m^{-1}{\cdot}K^{-1}$, $1W{\cdot}m^{-1}{\cdot}K^{-1}$, $2W{\cdot}m^{-1}{\cdot}K^{-1}$, $4W{\cdot}m^{-1}{\cdot}K^{-1}$, and inflow rate of Ar to 15 L/min, 30 L/min, 60 L/min. Initial condition and boundary condition were set respectively in two terms of process. Each initial conditions were set up by the preceding simulation of heat and fluid flow. The primary goal is the application of unidirectional growth of Si ingot using the result. In the result of the change of heat conductivity of crucible, the higher thermal conductivity of crucible shows the shorter solidification time and the bigger temperature difference. And the flow patterns are changed with the inflow rate of Ar. Finally, we found that the lower crucible's thermal conductivity, the better crucible is at polycrystalline Si ingot growth. But in case of Ar inflow, it is hard to say about good condition. This data will be evaluated as useful reference used in allied study or process variable control of production facilities.

• Proceedings of the Korean Statistical Society Conference
• /
• 2004.11a
• /
• pp.129-134
• /
• 2004

In this study, we investigate the effects of the weight function in the bounded influence regression quantile (BIRQ) estimator for the AR(1) model with additive outliers. In order to down-weight the outliers of X-axis, the Mallows' (1973) weight function has been commonly used in the BIRQ estimator. However, in our Monte Carlo study, the BIRQ estimator using the Tukey's bisquare weight function shows less MSE and bias than that of using the Mallows' weight function or Huber's weight function.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.603-615
• /
• 1992

This study was undertaken to investigate the interrelationship between the growth change of mandible and the developmental age of growing girls in the longitudinal data from 7 years to 15 years. The data were obtained from maturation stage of cervical vertebrae through the serial lateral cephalogram, height increment records which was taken at one year interval, menarche date through interview. On the basis of findings of this study, the following conclusions were obtained. 1. In general the growth of mandible (Ar-Pog, Ar-Go, Go-Pog) showed two peaks of growth velocity. 2. The maximum growth of mandible (Ar-Pog, Ar-Go, Go-Pog) almost appeared between stage 3 and stage 4 in maturation of cervical vertebrae. 3. It showed the tendency that the maximum increment of height appeared faster than that of mandible (Ar-Pog, Ar-Go, Pog-Go). 4. The maximum growth of height almost appeared between stage 2 and stage 3 in maturation of cervical vertebrae. 5. It showed the tendency that the menarche appeared later than the maximum growth of mandible (Ar-Pog, Ar-Go, Pog-Go). 6. The menarche almost appeared at stage 4, stage 5 in maturation of cervical vertebrae.

• Journal of the Korean earth science society
• /
• v.29 no.5
• /
• pp.386-395
• /
• 2008

The absolute age of lapilli tuff in sedimentary formation that contains dinosaur fossils in the Boseong area, Korea was determined radiometrically against volcanic rocks below and above the fossil-bearing horizons. The sanidine in the lapilli tuff below the fossil-bearing horizon (Seonso formation) has an $^{40}Ar-^{39}Ar$ age of $81.l{\pm}1.4Ma$. The Pilbong tuff above Seonso formation has an $^{40}Ar-^{39}Ar$ age of $81.0{\pm}2.4Ma$. An andesite dyke intruding all sedimentary units yields an $^{40}Ar-^{39}Ar$ age of $42.4{\pm}2.5Ma$. Thus 81 Ma age can be regarded as the best estimate for the age of the Seonso Formation and the associated the dinosaur eggs. This age correlates well with dinosaur fossil finds in the Haenam and Koseong regions of Korea. The occurrence of dinosaur eggs and clutches attests to the existence of dinosaurs in southern Korea at least inCampanian times.

• Analytical Science and Technology
• /
• v.30 no.2
• /
• pp.82-88
• /
• 2017

Adenophorae Radix (AR) is a frequently used medicinal herb; because of its popularity, products containing similar herbal products are often sold as substitutes, especially if their morphology is similar. However, any analytical method to identify AR based on quantitative analysis is not registered in Korea, Japan and China Pharmacopoeias. This study developed a simple HPLC method to discriminate between authentic AR and substitutes. Linoleic acid was used as a marker compound of AR. Our optimized HPLC-UV conditions included a mobile phase of 90 % acetonitrile under isocratic condition, and a flow rate of 1.0 mL/min at room temperature. Detection wavelength was set at 205 nm. Linoleic acid was detected at 13.5 minutes for a total analysis time of 20 minutes. The standard herb of AR contained 0.025 % of linoleic acid, while four authentic AR samples and eight substitutes contained 0.040~0.071 % and 0.004~0.014 %, respectively. Comparison of the linoleic acid concentrations of the sample types to reference AR showed that among 12 samples, only the four samples were authentic. Thus, our HPLC-UV method, along with our suggested content criterion for linoleic acid concentration, can be used for the quick and accurate determination whether the herbal products are authentic AR or substitute.