• 한국해양공학회지
• /
• 제18권5호
• /
• pp.50-56
• /
• 2004

This study is on the constant-current stress corrosion test, related to the load stress, in both the welded and non-welded zones of high tensile strength steel that is used for natural gas transmission. The surface corrosion pattern of the welded zone of API 5L-X65 specimens for natural gas transmission showed general corrosion and narrow pitting, and the pitting was increased with load stress. Initially, the average relative electrode potential and the average relative current of the high tensile strength steel, used for natural gas transmission specimens, were decreased rapidly, and the average relative electrode potential was higher and the average relative current was lower in welded zone, compared to base metal. The average relative electrode potential was decreased with load stress, and the average relative current was somewhat increased by increasing the load stress. The corrosion rate was less in welded zone, compared to base metal, and the corrosion rate was decreased by increasing the load stress.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.50-57
• /
• 2008

The effect of weld improvement on the corroded fatigue life of welded structures was investigated. Toe grinding, TIG dressing and weld profiling were used as the geometric improvement methods. Fatigue tests under the corroded condition in artificial seawater were carried out to investigate the corrosion fatigue behavior of API 2W Gr.50T steel plate produced by POSCO. The test results in weld improved conditions were compared with those in as-welded condition. The test results were also compared with the design curves in UK DEn Class F. Corroded fatigue life of weld improved specimens was longer than that of as-welded specimen. Especially, the corroded fatigue life exceeded the mean SN curve in air of UK DEn Class F.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.211-213
• /
• 2008

현재의 전력산업에서 통신은 필수 항목이 되었다. 따라서 전력장치의 대부분이 통신 기능을 가지고 있으며 전력장치 개발을 위해서는 통신 탑재가 필수이다. 본 논문에서는 전력분야에서 가장 널리 사용되고 있는 DNP(Distributed Network Protocol)를 간편하게 전력장치에 탑재할 수 있는 DNP 이길를 제안한다. 제안된 DNP API는 Recloser에 DNP를 탑재하여 편리성을 검증하고, Test Harness를 통하여 통신 신뢰도를 검증하였다.

• 대한수의학회지
• /
• 제44권4호
• /
• pp.581-586
• /
• 2004

The growth characteristics and the properties of the Enterococcus faecium (E. faecium) isolated from intestine of slaughting pig were examined in order to confirm whether it will be used practically as probiotics or not. E. faecium was identified by morphological and biochemical tests including of final confirming by API strep kit. Among 264 samples, 44 isolates (16.7%) of E. faecium were observed as an exellent growth as a range of $1{\times}10^7CFU/ml{\sim}3.3{\times}10^9CFU/ml$ in viable bacterial count on MRI medium. All isolates were shown non-haemolysis on the blood agar exception of 28 isolates shown ${\alpha}$-haemolysis and were identified as E. faecium by biochemical test using API strep enzyme kits. Eight strains (18.2%) were finally selected from which they were excellent sensitivity in showing of the acid-tolerance and the bile-tolerance in compare with reference strain.

• 에너지공학
• /
• 제18권1호
• /
• pp.49-55
• /
• 2009

금속의 수소취화는 수소를 사용하는 설비의 안전성을 위협하는 중요한 문제이므로, 수소 환경에서 금속의 취화평가법에 관한 연구의 필요성이 요구되고 있다. 수소사회를 대비하기 위하여 대용량의 수소공급방법에 관한 연구가 진행되고 있는데, 기존의 천연가스 배관을 통한 공급방안이 검토되고 있다. 본 연구에서는 배관 내부에 수소혼합가스가 흐르면 배관모재부 및 용접부의 손상이 우려되므로, 국내에 건설되어 운용되고 있는 X65 천연가스 배관의 모재부를 대상으로 수소취화 거동에 대하여 연구하였다. 재료의 수소침투는 전기분극법을 사용하였으며 강도평가에는 소형펀치시험법을 사용하였다. 수소장입량의 증가에 따라서 금속의 강도가 저하되는 현상이 발견되는 재료도 있으나, 본 연구에 사용한 X65강의 모재부에서 수소취화의 영향은 거의 나타나지 않았으므로 수소영향에 의한 X65강 모재부의 강도저하는 발생하지 않는 것으로 판단된다. 또한 소형펀치시험을 이용함으로써 금속재료의 수소취화에 의한 기계적 강도변화를 평가할 수 있었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 추계학술발표논문집 (상)
• /
• pp.367-370
• /
• 2001

최근 다양한 어플리케이션과 전용 임베디드 시스템의 개발 필요성이 증가하고 있으며 이는 Smart Community를 추구하는 디지털 지식사회의 중요한 이슈가 되고 있다. 현재 상용화되고 있는 대부분의 실시간 임베디드 시스템들을 다양한 측면에서 자사의 제품 기준에 따르는 기술적 특징과 성능 지표를 제공하고 있으며 이를 통한 성능 품질 등의 판단 근거로 제시되고 있다. 그러나 각 자료들이 공인 기관에서 제공되지 않아 자료의 신뢰도가 낮으며 따라서 성능측정 및 품질척도로 비교하는데는 어려움이 있다 따라서 본 연구는 이러한 문제점을 착안하여 자바 카드 API의 품질 평가를 위해서 사전에 테스트를 거쳐 좀더 신뢰성과 안전성이 높은 자바 카드 애플릿을 개발하고자 한다. 이에 가장 중요한 부분 중에 하나인 에러체크를 통해 임의적으로 에러 처리 시나리오를 작성해서 그 시나리오를 거친 테스트 데이터를 생성한 후, 그 데이터를 가지고 API의 풀질 평가를 하고자 하는데 목적이 있다. 이에 본 논문에서는 테스트 데이터 생성 시나리오를 제안하였다. 단지 제안만 해 놓았기 때문에 향후 이 시나리오를 거친 테스트 데이터 생성을 연구하고자 한다. 또한, Verification을 위해 수학에 기초를 둔 정형 기법(Formal Method)을 이용하여 좀더 깊이 있고, 정확한 검증을 수행 하고자 한다.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1221-1231
• /
• 2018

The effect of strain aging on tensile behavior and properties of API X60, X70, and X80 pipeline steels was investigated in this study. The API X60, X70, and X80 pipeline steels were fabricated by varying alloying elements and thermomechanical processing conditions. Although all the steels exhibited complex microstructure consisting of polygonal ferrite (PF), acicular ferrite, granular bainite (GB), bainitic ferrite (BF), and secondary phases, they had different fractions of microstructures depending on the alloying elements and thermomechanical processing conditions. The tensile test results revealed that yielding behavior steadily changed from continuous-type to discontinuous-type as aging temperature increases after 1% pre-strain. After pre-strain and thermal aging treatment in all the steels, the yield and tensile strengths, and yield ratio were increased, while the uniform elongation and work hardening exponent were decreased. In the case of the X80 steel, particularly, the decrease in uniform elongation was relatively small due to many mobile dislocations in PF, and the increase in yield ratio was the lowest because a large amount of harder microstructures such as GB, BF, and coarse secondary phases effectively enhanced work hardening.

• 한국수소및신에너지학회논문집
• /
• 제31권3호
• /
• pp.284-292
• /
• 2020

In this study, hydrogen charging was conducted for API X70 steel by the electro-chemical hydrogen charging method. Right after hydrogen was diffused from the specimen surface to the inside of the X70, the small punch tests and hydrogen concentration analysis was conducted within 5 minutes. Hydrogen was analyzed by melting the whole specimen and detect the gas after melting. Mechanical properties were measured by the small punch (SP) testing. Fracture surface and specimen surface were observed using scanning electron microscope. Three tests were repeated for study sensitivity of the SP test results under a same charging condition. It was observed that the variation of the maximum load, SP displacement at failure, hydrogen concentration as the charging period was not much in the case of X70 as the other steel such as Inconel. It can be argued that X70 base metal may have high hydrogen damage resistance and hydrogen diffusion in the base metal would not cause much embrittlement. Limitations of the SP test with 0.5 mm thickness for hydrogen damage test for X70 were discussed.

• 한국가스학회지
• /
• 제16권3호
• /
• pp.54-64
• /
• 2012

실 배관을 평가하는 DWTT (Drop Weight Tearing Test)의 파괴인성 값은 실 배관의 파괴인성 값 및 연성취성천이 온도를 예측할 수 있는 실험방법이므로, 최근 DWTT의 값에 대한 중요성이 증가되고 있다. 본 연구에서는 API X70과 API X65 라인파이프강의 DWTT 후의 온도에 따른 연성파면율, 역파면율, 흡수에너지와 온도 $-60^{\circ}C$~상온)와의 관계를 비교분석 하고자 하였다. X65과 X70의 값에서 마찬가지로 연성파면율 및 흡수에너지는 온도가 낮아질수록 함께 낮아지는 경향을 보였으며, X70의 경우에는 $-40^{\circ}C$ 까지 연성파괴를 보이는 반면, X65는 $-30^{\circ}C$ 까지 연성파괴를 보였다.

• Steel and Composite Structures
• /
• 제51권4호
• /
• pp.351-361
• /
• 2024

Accurate measurement of K_IC values for gas pipeline steels is important for assessing pipe safety using failure assessment diagrams. As direct measurement of K_IC was impossible for the API X70 pipeline steel, multi-specimen fracture tests were conducted to measure J_IC using three-point bend geometry. The J values were calculated from load-displacement (F-δ) plots, and the associated crack extensions were measured from the fracture surface of test specimens. Valid data points were found for the constructed J-Δa plot resulting in J_IC=356kN/m. More data points were added analytically to the J-Δa plot to increase the number of data points without performing additional experiments for different J-Δa zones where test data was unavailable. Consequently, displacement (δ) and crack-growth (Δa) from multi-specimen tests (with small displacements) were used simultaneously, resulting in the variation of Δa-δ (crack growth law) and δ-Δa obtained for this steel. For new Δa values, corresponding δ values were first calculated from δ-Δa. Then, corresponding J values for the obtained δ values were calculated from the area under the F-δ record of a full-fractured specimen (with large displacement). Given Δa and J values for new data points, the developed J-Δa plot with extra data points yielded a satisfactory estimation of J_IC=345kN/m with only a -3.1% error. This is promising and showed that the developed technique could ease the estimation of J_IC significantly and reduce the time and cost of expensive extra fracture toughness tests.