• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.204-212
• /
• 2017

The rotor dynamics and balancing technic for rotating equipment during engineering and manufacture stage are to be carefully considered in order to minimize the operation troubles regarding vibration during commissioning stage. In this paper, the test rig, which includes the disks as balancing plane, is designed and manufactured, so that the characteristic of rotor dynamics can be analyzed such as critical speed and mode shape. The critical speed predicted through natural frequency analysis is verified by the actual measurement on bearing housing vibration during start-up condition of test rig. The low speed balancing and the operating speed balancing test are performed respectively with consideration of first critical speed, and the residual unbalance amounts are estimated in accordance with the relevant method described in API standard. In addition, the single and dual plane balancing are carried out on main disk and trim disk depended on phase information at each balancing step.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.3
• /
• pp.43-48
• /
• 2010

In this study rotordynamic characteristics of an air turbo-compressor (ATC) used in oxygen plant are analyzed and its operating-speed balancing is performed to solve the vibration trouble caused by rotor unbalance. Three dimensional model of the ATC rotor is completed and then analytical FE (finite element) model, which is verified by experimental modal testing, is developed. A rotordynamic analysis includes the critical map, Campbell diagram, and unbalance response, especially considering the pedestal housings supporting tilting pad bearings. A test run of operating-speed, using tilting-pad bearing of actual use, showed that the vibration level increased very sharply as approaching the rated speed. The operating-speed balancing specified by API 684 was carried out by using influence coefficient method. The results showed that the vibrations at the bearing pedestal housings represented good levels of 0.1 mm/s. From the test run and operating-speed balancing, the analytical results, that is, critical speeds are in good agreement with the test results and unbalance responses introducing the correction masses are similar to the as-is test responses in its aspect.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.51-59
• /
• 2001

A diesel engine oil formulated in KRICT and a commercial diesel engine oil (API CG-4) were tested by car and their Kinematic Viscosity, TAN, TBN, metal content, additive depletion, anti-wear property and IR analysis were analyzed. From the research, both of the tested oils had almost the same properties f3r the change of TAN and TBN, but the change of Kinematic Viscosity of formulated oil was slightly higher than that of commercial oil. The iron content in the commercial oil increased rapidly from 7000 km while that of the formulated oil was still low. These results were confirmed by the anti-wear test with a 4-ball wear test machine for the each samples. Also, for the commercial oil, the depletion factor of the Zn-DTP which was added as an anti-wear property did not change any more after 7000 km. But, that of the formulated oil changed continuously to 8000 km, which means that the ability to prevent wear of the sliding pairs exists for the formulated oil. From the analysis results of oil properties obtained by field test, it was found that the commercial oil could be used only within 7000 km, but the formulated oil could be used more than 8000 km without severe wear of the sliding parts in the diesel engine.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.3
• /
• pp.1-7
• /
• 2010

The aim of this research is to evaluate movement and path characteristics of developed heavy duty handling robot using laser tracker(API T3) according to the ISO 9283 robot performance evaluation criteria. As carry out 3D modeling and simulation using CATIA, a test cube was set up to select moving and measuring range of robot. Performance test for pose and distance accuracy, path and path velocity accuracy under payload zero and 440kgf was accomplished. The resulted output data show the reliability of the developed robot.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.1
• /
• pp.78-82
• /
• 2009

Eight commercially packaged kimchi products were examined over 15 days of storage at $4^{\circ}C$ to evaluate the occurrence of Hafnia alvei (H. alvei). Additionally, 7 saeujeot products, as a possible ingredient source, were analyzed to examine the bacteria's origin. Over the storage period, kimchi samples had decreasing pH levels, which stabilized at pH 4.2; acidity increased to $0.9{\pm}0.1%$. Lactose-nonfermenting bacteria, which H. alvei belongs to, gradually reduced in numbers over the kimchi storage. However, the relative frequency of H. alvei to lactose-nonfermenting bacteria tended to increase. From the kimchi samples, 58 H. alvei-presumptive colonies were selected. Forty three colonies turned out to be H. alvei and 15 colonies were identified as other strains or uncertain identifications when the API 20E system was used. From further test, 3 of the 43 colonies were H. alvei (-) against the phage test. Finally, H. alvei was isolated from saeujeot, indicating that this ingredient can be an originating source of H. alvei in kimchi.

• Corrosion Science and Technology
• /
• v.8 no.4
• /
• pp.133-138
• /
• 2009

For the corrosion protection of the natural gas transmission pipelines, two methods are used, cathodic protection and coating technique. In the case of cathodic protection, defects are embrittled by occurring hydrogen at the crack tip or material surface. It is however very important to evaluate whether cracks in the embrittled area can grow or not, especially in weld metal. In this work, on the basis of elastic plastic fracture mechanics, we performed the CTOD testing with various test conditions, such as testing rate and potential. The CTOD of the base metal and the weld metal showed a strong dependence of the test conditions. The CTOD decreased with decreasing testing rate and with increasing cathodic potential. The morphology of the fracture surface showed the quasi-cleavage at low testing rate and cathodic overprotection. The low CTOD was caused by hydrogen embrittlement at crack tip.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2480-2482
• /
• 2003

As make a simulator including user interface functions like start & stop, load parameters, record and save, view 3D display has a real-like length and numerical value of sizes, represent real-shape of inner and outer part of robot, make the possible fast and slow selective observation as a adjust a step, receiving the images through the image device which attached in robot, so make a motion tester simulator of humanoid robot which coded by windows based GUI(Graphic User Interface) program with a MMI(Man Machine Interface) function that user can watch the environment which included robot and use a images. For implement this, we use a design data that converted data which made by use a CAD for Laser RP(Rapid Prototyping) progress into C coding for simulator programming. Using OpenGL, an API of graphic, it has a efficiency and detail of graphic operation. To make and test animation data, it has the option of save and resume in animation.

• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.215-222
• /
• 2006

The importance of mobile software test is being addressed to improve the productivity and reliability of the software. Test automation technique based on mobile platform is required for effective application of mobile software test. That is, a technique is needed to generate test case for mobile platform API. When test case generated, software productivity and reliability are improved, while test duration and cost are decreased. In this paper, we identified test case generation scope through previous works about test automation, suggested keyword driven method, a test case generation technique on J2ME platform, and recognized that proposed method can be applicable to generating test case based on J2ME platform.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.146-152
• /
• 1999

Screening experiments were carried out in order to select bacteria causing brown blotch disease on the mushroom, Pleurotus ostreatus. Four bacteria causing brown blotch disease were isolated from Pleurotus ostreatus and soils around the mushroom farm. Three strains showing antagonism against brown blotch causing bacteria, A-11, A-20 and A-29 were also isolated through methods pitting test, cross checking and biochemical test, and identified as Pseudomonas fluorescence for A-11 and A-20, and Pseudomonas sp. for A-29, respectively. Colonial morphology test also showed that A-11 and A-29 were appeared as transparent gel with green color, whereas the colony of A-20 showed opaque gel with light green color.

• Korean Journal of Veterinary Service
• /
• v.19 no.2
• /
• pp.115-125
• /
• 1996

A total of 315 microorgainisms were isolated from 256 pneumonic lung samples of pig in abattoirs of northern Chungnam area during February to November 1994, and Identified 97 strains as Pusteurella multocida, 89 strains as Staphylococcus spp, 54 strains as Streptococcus spp, 22 strains as Mycoplasma spp, 21 strains as Escherichia coli, 18 strains as Haemophilus parsuis, 11 strains as Corymebacteroi, pyogenes, and 3 strains as Acrinobacillus spp by Gram's and Dienes stain, and biological properties test Involved API system. After that, they were examined anti biotic susceptibility for ampicillin(AM), cephalothin(CF), chloramphenicol(CP), erythromycin(EM), kanamycin(KM), gentamicin(GM), neomycin(NM), penicillin(PC), streptomycin(SM), tetracycline(TE), tiamulin(TIA), tylosin(TYL), methicillin(DP), colistin(CL) and trimet hoprim(SXT). In antibiotics susceptibility test, 293 isolates except Mycoplasma spp 22 strain were highly susceptible to DF(79.2%) and AM(76.2%), but resistant to PC(14.0%), NM(19.5%) and KM (23.2%) The multiple drug resistant patterns were noted in most isolates, whereas only 7 isolates resistant to single drugs.