• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.130-143
• /
• 1995

The purpose of this study was to analyze the magnitude and distribution of stress using photoelastic model with the rigid connection using T-block attachment and non-rigid connection using key & keyway attachment. The vertical load of 16 Kg was applied on the central fossa of the tooth, the pontic and the implant, and the pattern and distribution under each condition was analyzed. The following results were obtained : 1. In case of vertical load on the central fossa of the implant, the stress was concentrated at the apex of the implant involving the mesial alveolar bone in both fixed partial denture with the rigid connection and that with the nonrigid connection and the stress concentration at the mesial cervical area of the implant was a little more in the nonrigid connection than in the rigid connection. 2. In case of vertical load on the central fossa of the pontic, the stress was concentrated at the apex of 2nd bicuspid in both 3 unit fixed partial denture with nonrigid connection and that with the rigid connection. The stress was more concentrated at the mesial alveolar bone of the implant, but the stress distribution at the natural teeth more favorable at the rigid connection than at the non-rigid connection in case of 4 unit fixed partial denture. 3. In case of vertical load of the central fossa of the 2nd bicuspid, much stress with 3 fringe order was observed at the apex of the 2nd bicuspid in the 3 unit fixed partial denture, but relatively even stress distribution was observed at the apex of the implant, the 1st and 2nd bicuspid, and the adjacent cuspid in the 4 unit fixed partial denture.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.13 no.1
• /
• pp.117-126
• /
• 1983

The mandibular canal must be considered carefully during surgical treatment, especially surgical extraction of the impacted tooth and intraosseous implant because it contains the important inferior alveolar nerve and vessels. The author investigated the curvatUre of the mandibular canal, the positional frequency of mandibular foramen to the occlusal plane and gonial angle and the positional frequency of the mental foramen to the tooth site using orthopantomograms. The materials consisted of 295 orthopantomograms divided into seven groups ranging from the first decade to 6th. decade. The results were as follows: 1. The position of mandibular foramen was most frequently below occlusal plane in Group Ⅰ (78.6%) and Group Ⅱ (71.2%), above occlusal plane in Group Ⅲ (63.0%), Group IV (71.1%), Group V (57.6%), Group (76.7%) and Group VII (70.0%). 2. The curvature of mandibular canal was 142.8° in Group Ⅰ, 142.09° in Group Ⅱ, 139.34° in Group Ⅲ, 141.48° in Group Ⅳ, 138.45° in Group Ⅴ, 140.77° in Group Ⅵ and 143.89° in Group Ⅶ. 3. The gonial angie was 125.82° in Group Ⅰ, 123.18° in Group Ⅱ, 124.06° in Group Ⅲ, 120.45° in Group Ⅳ, 121.12° in Group Ⅴ, 121.63° in Group Ⅵ and 121.24° in Group Ⅶ. 4. The position of the menta] foramen was most frequently below the apex of mandibular first premolar in Group Ⅰ (57.2%), between the apex of mandibular first and second premolar in Group Ⅱ (59.6%) and Group Ⅲ (48.9%), and below the apex of mandibular second premolar in Group Ⅳ (39.2%), Group Ⅴ (48.5%) Group Ⅵ(46.6%) and Group Ⅶ(56.4%)

• Anatomy and Cell Biology
• /
• v.50 no.1
• /
• pp.41-47
• /
• 2017

This study investigated the topographic relationships among the eyeball and four orbital margins with the aim of identifying the correlation between orbital geometry and eyeball protrusion in Koreans. Three-dimensional (3D) volume rendering of the face was performed using serial computed-tomography images of 141 Koreans, and several landmarks on the bony orbit and the cornea were directly marked on the 3D volumes. The anterior-posterior distances from the apex of the cornea to each orbital margin and between the orbital margins were measured in both eyes. The distances from the apex of the cornea to the superior, medial, inferior, and lateral orbital margins were 5.8, 5.8, 12.0, and 17.9 mm, respectively. Differences between sides were observed in all of the orbital margins, and the distances from the apex of the cornea to the superior and inferior orbital margins were significantly greater in females than in males. The anterior-posterior distance between the superior and inferior orbital margins did not differ significantly between males (6.3 mm) and females (6.2 mm). The data obtained in this study will be useful when developing practical guidelines applicable to forensic facial reconstruction and orbitofacial surgeries.

• Restorative Dentistry and Endodontics
• /
• v.43 no.3
• /
• pp.33.1-33.8
• /
• 2018

Objectives: This study aimed to investigate the prevalence of a separate distolingual root and to measure the thickness of the buccal cortical bone in mandibular first molars in Koreans using cone-beam computed tomography (CBCT) images. Materials and Methods: High-quality CBCT data from 432 patients were analyzed in this study. The prevalence of a separate distolingual root of the mandibular first molar was investigated. The distance from the distobuccal and distolingual root apices to the outer surface of the buccal cortical bone was measured. We also evaluated the thickness of the buccal cortical bone. Results: The prevalence of a separate distolingual root (2 separate distal roots with 1 canal in each root; 2R2C) was 23.26%. In mandibular first molars with 2R2C, the distance from the distobuccal root apex to the outer surface of the buccal cortical bone was 5.51 mm. Furthermore, the distance from the distolingual root apex to the outer surface of the buccal cortical bone was 12.09 mm. In mandibular first molars with 2R2C morphology, the thickness of the buccal cortical bone at the distobuccal root apex of the mandibular first molar was 3.30 mm. The buccal cortical bone at the distobuccal root apex was significantly thicker in the right side (3.38 mm) than the left side (3.09 mm) (p < 0.05). Conclusions: A separate distolingual root is not rare in mandibular first molars in the Korean population. Anatomic and morphologic knowledge of the mandibular first molar can be useful in treatment planning, including surgical endodontic treatment.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.28-38
• /
• 2008

This study was to investigate the influence of composite resins with different elastic modulus, cavity modification and occlusal loading condition on the stress distribution of restored notch-shaped noncarious cervical lesion using 3-dimensional (3D) finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity and a modified cavity with a rounded apex were modeled. Unmodified and modified cavities were filled with hybrid or flowable resin. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. The results were as follows: 1. In the unrestored cavity, the stresses were highly concentrated at mesial CEJ and lesion apex and the peak stress was observed at the mesial point angle under both loading conditions. 2. After restoration of the cavity, stresses were significantly reduced at the lesion apex, however cervical cavosurface margin, stresses were more increased than before restoration under both loading conditions. 3. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin. 4. Cavity modification the rounding apex did not reduce compressive stress, but tensile stress was reduced.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.595-602
• /
• 1998

Among the apex locators, the frequency dependent type is more accurate and convenient to use than others, But the accuracy of the apex locator is still influenced by the presence of various electrolytes used in root canal treatments. In this study, we have developed a frequency dependent electronic apex locator minimizing the influence of the electrolytes on the measurement of root canal lengths. It was also confirmed that two frequencies of 500Hz and 100kHz are optimal for the measuring impedance compare with commercial product used(400Hz and 8kHz)a and there were no differences in accuracy among the three different types of the waveforms; sinusoidal, triangular, and rectangular waves(p>0.05). Impedance ratio of the two different frequencies represents the position of the file in root canal, and the voltage difference of two signals represents the status of the fluid in the root canal. As a result of compensation using the voltage differences, the errors were decreased on the average from +0.54mm to +0.18mm in $H_2O_2$ solution (p<0.01), and from -0.33mm to -0.01mm in NaOCl solution(p<0.01). The accuracies based on ${\pm}$0.5mm, in $H_2O_2$ and NaOCl solutions were improved with the automatic compensation from 71.1% and 91.1% to 82.2% and 100% respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.273-281
• /
• 2011

Purpose: In order to provide the fundamental information for the design development of RGP lenses and its clinical prescription, the corneal types of Korean twenties were analyzed according to corneal shapes, astigmatic degree, and the certain distance from the corneal apex. Methods: Corneal types of total 252 eyes in 20s were firstly classified, then their corneal radii from the certain distance from the corneal apex were measured by corneal topography and further analyzed based on the astigmatic degree. Results: Korean 20s' corneal types were classified as 14.3%(36 eyes) of round, 31.3%(79 eyes) of oval, 28.6%(72 eyes) of symmetric bow tie, 17.5%(44 eyes) of asymmetric bow tie, 8.3%(21 eyes) of irregular shapes. The round and oval typed corneas had mild astigmatic degree whereas the higher astigmatic degree in symmetric and asymmetric bow tie typed corneas were shown. The relative corneal radii of round and oval typed corneas at each distance from corneal apex were shown to consistently increase regardless of astigmatic degrees when they measured at certain distances from the corneal apex. However, the relative corneal radii of symmetric and asymmetric bow tie typed corneas within 1.0-1.5mm from the corneal apex were decreased, which showed steeper slope than it within 1.0 mm and somewhat different based on astigmatic degrees. Bigger change of corneal radii outer 3.5 mm from the corneal apex in symmetric bow tie typed corneas with astigmatism of 1.50-2.00 D and 2.25-2.75 D appeared. Conclusions: The consideration of radial change from the central cornea to peripheral cornea is necessary for manufacturing RGP lens and its prescription since they showed different change in corneal radii by corneal patterns and astigmatic degrees.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.177-181
• /
• 1984

This study was to confirm the influence of intracanal instrumentation whether the pulp infection could be extended to periapical tissue. Fifty three teeth (24 badly decayed and infected, 29 sound teeth) were employed for this experiment and grouped as follows; 1. The specimen taken from the tip of 12 infected pulp in which reamer was inserted to the canal up to apical 1/3 and cultured as long as 48 hours. After 24 hours culture 11 cases were positive and 1 ease was negative but the time of incubation elapsed as 48 hours a negative case turned to positive. 2. Broth immersed paper disc was placed for 1 minute on the tip of 12 infected teeth with a reamer inserted to the apical end and cultured as usual manner in the incubator. At 24 hour culture the growth was significant in 9 cases and after 48 hours total 12 cases were positive. 3. Reamer was inserted to apical 1/3 on 14 sterile pulp canals and specimens obtained from the root tip were cultured for 24 and 48 hours. The results on both group were negative. 4. Similar maner with No.3 except reamer tip was rest exactly at the apex revealed only 2 cases of positive at 48 hour culture. 5. The tip of 24 reamers which reached to apical 1/3 and apex of infected canal were cultured for 24 and 48 hours. At 24 hour culture the growth was evident. 6. The tip of 14 reamers which inserted to apical 1/3 of sterile canal showed negative at 24 hour culture. The 15 cases of the tip which reached to the apex of sterile canal were found negative except 3 positive cases at 48 hour culture.

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.103-106
• /
• 2004

Plantlet regeneration from the shoot apex was studied in three different genotypes of the chinese yam (Dioscorea opposita Thunb) cv. Jnagma and Danma, Dunggunma. The effects of plant growth regulators and inorganic salts concentration of the culture medium on bud induction and shoot growth were examined. The combinations of 0.2 mg/L BAP + 0.2mg/L kinetin, 0.01mg/L NAA + 0.2 mg/L kinetin and a single treatment of 0.2mg/L BAP were equally effective for bud and shoot formation from the shoot apices in the three cultivars. Auxin (2,4-D, NAA) treatment enhanced calli formation from the cultured apices. Also, the shoot apices of the cv. Dunggunma produced more callus and buds on the culture medium (MS) containing 0.05mg/L NAA and 0.5-1.0mg/L SAP. Lower salt strength of medium inhibited shoot elongation but did not have much effect on the shoot and bud induction from the shoot apices. These results will be useful to obtain disease-free plants of the Chinese yam.

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.131-134
• /
• 2005

It is often difficult to identify and localize intraorbital foreign bodies despite of modern high-resolution imaging investigation. Especially, posteriorly located foreign bodies have increased risks of morbidity that surgical approach is often complicated. No matter how trivial it seems, retained foreign body, particularly organic in nature, may give rise to severe orbital and cerebral complications. High clinical suspicion, proper diagnostic studies, timely referral to a skilled orbital surgeon are mandatory. We report a case of intraorbital wooden foreign body that required two separate exploration for removal. Initial exploration failed to identify and locate the foreign body completely. After the operation, fistula formation and purulent discharge were developed and the imaging investigation results were equivocal, complicating the management. A second exploration yielded multiple intraorbital wooden foreign body in the apex of orbit. The patient fully recovered without complication. The evaluations and the details of management strategy are discussed.