• Journal of muscle and joint health
• /
• v.3 no.1
• /
• pp.90-103
• /
• 1996

The purpose of this paper is to compare two approach to assessment of coping patterns. The sampling method was a purposive sampling technique. The study participants were out patients 113 of rheumatoid arthritis center of one University hospitals in Seoul. Datas were collected from Nov. 13 to Nov. 24, 1995. The instruments used for this study were Graphic Rating Scales of pain, The Beck Depression Inventory and Coping Patterns tool. The collected data were analyzed for frequency, means, SD, factor analysis., Pearsons' correlations and ANOVA. The results were summerized as follows ; 1. When raw scores were used : there were not correlation in all three coping patterns. 2. When relative scores were used : there were significantly correlated in all three coping patterns. 1) Active coping and Positive-cognitive coping (r=-0.352, p< 0.0001) 2) Positive-cognitive coping and Negative-cognitive coping (r=-0.594, p< 0.0001) 3) Active coping and Negative-cognitive coping(r=-0.544, p< 0.0001) The results of this research with relative scales provided more insight into the correlation in all three coping patterns. 3. Pearsons' Correlations were computed for each coping pattern, age, pain level, duration of pain and BDI. 1) Using raw score : (1) Active coping was significantly related to pain level(sensory score ; r=0.268, p<0.05, affective score ; r=0.266, p< 0.05) (2) Positive-cognitive coping was significantly related to age (r=-0.252, p< 0.05), pain level (sensory score ; r= -0.244, p< 0.05) (3) Negative-cognitive coping was significantly related to depression level (r=0.312 p< 0.0001). 2) Using relative score (1) Active coping was significantly related to pain level(sensory score ; r=0.299, p<0.05, affective score ; r=0.246, p< 0.05) (2) Positive-cognitive coping was significantly related to age (r= -0.187, P< 0.05), pain level (sensory score ; r=-0.317, p<0.0001, affective score : r=-0.305, p<0.0001) and depression level(-0.339, p<0.0001)) (3) Negative-cognitive coping was significantly related to depression. level(r=0.313, p<0.0001). 4. When raw and realtive coping scores were compared to those of age groups, religious groups and BDI level(high, middle, low) ; 1) Using raw score : (1) Active coping : there were not significantly difference (2) Positive-cognitive coping ; 20-39 age group and 50-59age group had significantly higher scores than over 60age group. BDI-low level group had significantly higher scores than other groups. (3) Negative-cognitive coping : 20-39age group and over 60age group had significantly higher scores than 40-49age group. Non-religious group had significantly higher scores than christian group. BDI-high level group had significantly higher scores than other groups. 2) Using relative score : (1) Active coping : over 60 age group had significantly higher scores than 20-39 age group and 40-49age group had significantly higher scores than 20-39 age group (2) Positive-cognitive coping ; 40-49age group, 20-39age group and 50-59age group had significantly higher scores than over 60age group. Christian group had significantly higher scores than non-religious group. BDI-low level group had significantly higher scores than other groups. (3) Negative-cognitive coping ; Non-religious group had significantly higher scores than christian group and buddhistic group. BDI-high level group had significantly higher scores than other groups. The current data suggest that relative scores may yield a different perspective on coping patters than raw scores. The use of relative scores reveals the relation clearly, without its being blurred statistically by the effect of other coping strategies or being relegated to a partial correlation. The use of relative scores holds promise for delineating the relations between ways of coping and health-related behavior.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.72-80
• /
• 2015

Purpose Serum estradiol ($E_2$) measurement is requested for diagnosing menstrual cycles, ovulation induction, infertility, and menopause. $E_2$ is measured using several methods and kits including radioimmunoassay (RIA) and chemiluminescece immunoassay (CLIA). The purpose of this study was to evaluate quality of these methods and to compare them with each other. Materials and Methods Seven radioimmunoassay kits and two CLIA methods were included in the analysis. Using standard samples and patient samples, intra-assay precision, inter-assay precision, correlation between other methods, sensitivity, and recovery rate were evaluated. Results For all tested kits and methods, coefficients of variance (CVs) of intra-assay precision test were 10.9~13.6% in low-level samples and less than 10% in medium and high-level samples. CVs of inter-assay precision test were 10.8~12.3% in low-level samples and less than 10% in medium and high-level samples with all tested kits and methods. Recovery rates were $92.7{\pm}12.4%$ for SIEMENS, $101.4{\pm}18.4%$ for DIAsource, $95.1{\pm}11.5%$ for AMP, $108.4{\pm}18.5%$ for BECKMAN COULTER, $104.2{\pm}13.5%$ for BECKMAN COULTER Ultra Sensitive, $101.3{\pm}11.6%$ for CIS Bio, and $93.1{\pm}13.2%$ for MP kits. Sensitivity was 7.5, 6.2, 5.7, 6.2, 5.3, 4.5, and 5.5 pg/mL for SIEMENS, DIAsource, AMP, BECKMAN COULTER, BECKMAN COULTER Ultra Sensitive, CIS Bio, and MP kits, respectively. The measurement by MP kit was slightly higher than those by other kits in low-level samples, and the measurement by E170 was slightly higher than those of other kits in medium and high-level samples. In the measurement of standard sample for external quality control, SIEMENS kit produced relatively lower values whereas E170, Architect, and MP kits produced relatively higher values compared with other kits. Conclusion All tested kits for $E_2$ measurement have satisfactory performance for clinical use. However, correlation between kits should be considered when test kits are to be changed, because some pairs of kits do not have correlations with each other.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.70-75
• /
• 2017

Purpose Radioactive iodine thyroid uptake (RAIU) rate is an examination which determines and seeks about general functions of thyroid gland. The size of thyroid gland is normally different between each person, also patients having thyroid diseases have had a variety of size of thyroid gland compared with others. The purpose of this study will investigate about the counting rate which is effected by the geometric factors through the length and volume changes of the source in RAIU rate. Materials and Methods I-131 185 kBq ($5{\mu}Ci$) were placed in a cylindrical phantom of 0.5 cm, 1 cm, 1.5 cm, and 3 cm in diameter, respectively, and saline was added to gradually increase the length by 1 cm in the horizontal and vertical directions to give a change in volume. The source was measured 20 times for 20 seconds from a distance of 25 cm to $364.4keV{\pm}20%$ energy ROI with Captus 3000 thyroid uptake system (Capintec, NJ, USA). Results When the source was located in the transverse direction of the detector, the consequence of one-way ANOVA is that even though the length of source is increased each diameter, there is mostly no significant difference. When the source was located in the longitudinal direction and the counting rate of length 1 cm at all diameter is set to 100%, the average is 92.57% for length 2 cm, 86.1% for 3 cm, 80.69% for 4 cm, 74.82% for 5 cm, and 69.68% at 6 cm. Conclusion According to this study, it is expected that the gap of RAIU rate has been depended on the thickness of thyroid gland as well as the diameter of the beaker. We know that the change of the volume with the increase of the length of the source had less effect on the change of the counting rate. Thus, in order to reduce the error in the measurement of the counting rate with the thyroid uptake rate equipment, an accurate counting rate can be relatively measured if the counting rate which is measured is corrected by thickness or the distance between the thyroid and the thyroid uptake rate equipment is changed.

• Korean journal of food and cookery science
• /
• v.13 no.1
• /
• pp.30-39
• /
• 1997

The purpose of this study was to investigate food services and plate waste of the elementary school children in the urban, rural and suburban areas of Taegu and Kyoungpook province. Statistical data analysis was performed using the SPSS programs for Crosstabs analysis T-test, One-way Anova and Pearson's correlation. The results were as follows: The serving size of rice was greater in suburban area than in rural and urban area by the physical estimation. The amount of soup given was the greatest in rural area. The rate of waste in soup was higher than that of rice. Among side dishes, plate waste rate of braised potato was the highest in rural, then suburban and urban area. There were significant differences (p < .001) among the schools in the three areas. Especially, plate waste rate of cucumber and cabbage salad was the highest in all three areas. Then finally the serving size and plate waste rate of Kimchies were the greatest in rural, then suburban and urban schools. There were significant differences in 'spice pickled cabbage'(p < .001) and 'spice pickled radish'(p < .01) among the three areas. Plate waste amounts of egg soup and pine mushroom soup in urban area were greatest. In rural area, side dishes except egg soup, cabbage salad and Kimchies had a greater amount of plate waste. In suburban areas, there were smaller plate waste amount in rice, but plate waste amounts of pine mushroom soup and beef soup were great. Plate waste rate of rice and 'Kimchies' by children's rating estimation were significantly higher in rural than suburban and urban areas. There were no significant differences in plate waste rate of the given food except braised chicken (p < .001), soup (p < .001) and 'Kimchies' (p < .05) between the physical estimation and the children's rating estimation. Increased satisfaction on food service in most menus resulted decreased plate waste rate. There was a significant degree of satisfaction on the amounts of food served.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.286-294
• /
• 2003

The purpose of this study was to analyze the food service management practices and productivity in 49 elementary schools in the Daegu and Gyeongsangbuk-do areas. Survey questionnaires were used to obtain a variety of quantitative and qualitative information, including general food service management and productivity, on elementary school food service systems. Descriptive analysis, $\div$2-test, t-test and one-way ANOVA analysis were used as the statistical methods in this study. Eighteen elementary schools were located in urban areas, 13 in provincial areas and 18 in isolated areas. The average number of meals was 565.1, with a significant difference (p＝0.001) between the areas. The average cost per a meal was 1151.0 Won, with a significant difference (p＝0.001) between the areas. The productivity Index (meal/hour) was 13.5, with a significant difference (p＝0.001) between the areas. There was a significant positive correlation of the productivity Index between the total number of meal, the number of employees, the total food cost, meals per employee and the employee's working period. There was a significant negative correlation between the productivity Index and the number of side dishes, the lost per meal, the labor cost per meal and the employee's job satisfaction degree index (JDI).

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.445-452
• /
• 2010

Objectives: The aim of this study was to compare apical sealing ability and physical properties of MTA, MTA - AH-plus mixture (AMTA) and experimental Portland cement - Epoxy resin mixture (EPPC) for a development of a novel retro-filling material. Materials and Methods: Forty-nine extracted roots were instrumented and filled with gutta-percha. Apical root was resected at 3 mm and the retro-filling cavity was prepared for 3 mm depth. Roots were randomly divided into 3 groups of 15 roots each. The retro-filling was done using MTA, AMTA, and EPPC as the groups divided. Four roots were used as control groups. After setting in humid condition for 24 hours, the roots were immersed in 1% methylene blue dye solution for 72 hours to test the apical leakage. After immersion, the roots were vertically sectioned and photos were taken to evaluate microleakage. Setting times were measured with Vicat apparatus and digital radiographs were taken to evaluate aluminum equivalent thickness using aluminum step wedge. The results of microleakage and setting time were compared between groups using one-way ANOVA and Scheffe's post-hoc comparison at the significance level of 95%. Results: AMTA and EPPC showed less microleakage than MTA group (p < 0.05). AMTA showed the highest radio-opacity than other groups and the novel EPPC showed 5 mm aluminum thickness radio-opacity. EPPC showed the shortest initial and final setting times than other groups while the MTA showed the longest (p < 0.05). Conclusions: Under the condition of this study, the novel composite using Portland cement-Epoxy resin mixture may useful for retro-filling with the properties of favorable leakage resistance, radio-opacity and short setting time.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2007

This study compared the microshear bond strength (${\mu}SBS$) of light-cured and dual-cured composites to enamel bonded with three self-etching adhesives. Crown segments of extracted human molars were cut mesiodistally, and 1 mm thickness of specimen was made. They were assigned to three groups by used adhesives: Xeno group (Xeno III), Adper group (Adper Prompt L-Pop), and AQ group (AQ Bond). Each adhesive was applied to cut enamel surface as per manufacturer's instruction. Light-cured (Filtek Z 250) or dual-cured composite (Luxacore) was bonded to enamel of each specimen using Tygon tube. After storage in distilled water for 24 hours, the bonded specimens were subjected to ${\mu}SBS$ testing with a crosshead speed of 1 mm/minute. The mean ${\mu}SBS$ (n = 20 for each group) was statistically compared using two-way ANOVA, Tukey HSD, and t test at the 0.05 probability level, The results of this study were as follows ; 1. The ${\mu}SBS$ of light-cured composite was significantly higher than that of dual-cured composite when same adhesive was applied to enamel. 2. For Z 250, the ${\mu}SBS$ of AQ group ($9.95{\pm}2.51 MPa$) to enamel was significantly higher than that of Adper soup ($6.74{\pm}1.80 MPa$), but not significantly different with Xeno group ($7.73{\pm}2.01 MPa$). 3. For Luxacore, the ${\mu}SBS$ of Xeno group ($5.19{\pm}1.32\;MPa$) to enamel was significantly higher than that of Adper group ($3.41{\pm}1.19\;MPa$), but not significantly different with AQ group ($4.50{\pm}0.96\;MPa$).

• Journal of Nutrition and Health
• /
• v.47 no.2
• /
• pp.89-98
• /
• 2014

Purpose: Association of low intake of calcium (Ca) and inadequate vitamin D (VD) status with higher prevalence rates of obesity has been reported. This study was conducted in order to investigate the effects of different levels of whey Ca and VD intake on lipid metabolism in growing rats. Methods: A total of 56 five-week-old male Sprague-Dawley rats were divided into seven groups and fed for five weeks. Ca groups were divided into three levels, low, normal, and high (0.25%, 0.5%, 1%). VD subgroups in the low and high Ca groups were divided into three levels, low, normal, and high (10 IU, 1,000 IU, and 5,000 IU). The effects of Ca and VD on each group were evaluated by two way ANOVA. Results: Significantly higher amounts of abdominal fat, visceral fat, and epididymal fat were observed in the Low-Ca groups than in the Normal-Ca and High-Ca groups. Serum leptin levels of Low-Ca groups were higher than those of Normal-Ca and High-Ca groups. The highest serum parathyroid hormone concentration was observed in the low Ca low VD group. The levels of serum 25(OH)D were significantly increased with increasing dietary VD levels. Significantly higher serum levels of triglycerides, total cholesterol, and HDL-cholesterol were observed in the low Ca groups than in the normal Ca and high Ca groups. Conclusion: These results indicate that low calcium intake increased serum lipid level and body fat amount.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.675-681
• /
• 2012

Korean Ministry of Health and Welfare started to implement oral health hub center to provide oral health preventive program and dental treatment to public, especially dental vulnerable class in 2006. But, there is no applicant area to implement it regardless of national budget arrangement in 2012. This study is aimed to investigate the reason not to be implemented and requirements of implementation. 293 among 1,000 public dental hygienists in the area where have not implemented oral health hub center were surveyed in Korea from April to July in 2012 through convenience sampling. The questionnaire consisted of the reason why oral health hub center have not been implemented, the requirement of implementation, duty area and duty position et al. After removal of insufficient responses, 217 questionnaires were analyzed by t-test and ANOVA using SPSS 20.0. The reason why oral health hub center have not been implemented were deficiency of the priority list as compared with other health program (72.4%), space insufficiency (71.4%), regional budget insufficiency (70.5%), will insufficiency of oral health promotion (70.5%) and manpower insufficiency (62.7%). The first requirement of implementation were space expansion and regional budget expansion, followed by reduction of record-originated and administrative tasks, understanding on oral health program of higher ranking public officials in health center, manpower expansion, reduction of other tasks than oral health program and volunteer source expansion. Budget insufficiency and manpower insufficiency in Metropolis were ranked higher than other area (p<0.05). The group not to discuss oral health hub center graded each reason not to be implemented significantly higher than the other group (p<0.05). We suggested that to promote the importance of public oral health program be needed to public and higher ranking public officials to implement oral health hub center. In addition, we insisted that more dental manpower and budget be needed for reduction of oral health inequity in metropolis.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.388-397
• /
• 2011

The purpose of this study was to determine the optimum ethanol extraction conditions for maximum extraction of functional components such as ferulic acid, oryzanol, and toopherol from black rice bran using Response Surface Methodology (RSM). A central composite design was applied to investigate the effects of the independent variables of solvent ratio ($X_{1}$), extraction temperature ($X_{2}$) and extraction time ($X_{3}$) on the dependent variables such as total phenol components ($Y_{1}$), total flavonoids compounds ($Y_{2}$), electron donating ability ($Y_{3}$), $\gamma$-oryzanol ($Y_{4}$), ferulic acid ($Y_{5}$) and $\alpha$-toopherol components ($Y_{6}$). ANOVA results showed that coefficients of determination (R-square) of estimated models for dependent variables ranged from 0.8939 to 0.9470. It was found that solvent ratio and extraction temperature were the main effective factors in this extraction proess. Particularly, the extraction efficiency of ferulic acid, $\gamma$-oryzanol and $\alpha$-toopherol components were significantly affected by extraction temperature. As a result, optimum extraction conditions were 20.35 mL/g of solvent ratio, 79.4$^{\circ}C$ of extraction temperature and 2.88 hr of extraction time. Predicted values at the optimized conditions were acceptable when compared with experimental values.