• Journal of Preventive Medicine and Public Health
• /
• v.32 no.1
• /
• pp.65-71
• /
• 1999

Objectives. The purpose of this investigation was to study the correlation between cognitive impairment and activities of daily living(ADL) In the elderly of rural area. Methods. The study population consisted of 210 elderly people aged 65 years and older, living in a district of Kyongju City. The cognitive impairment was measured with the Korean version of mini-mental state examination(MMSE-K) and newly constructed the Korean version of mini-mental state examination (K-MMSE). Bristol activities of dally living scale developed specifically to be used with people with dementia was used to measure ADL Results. The mean scores of both MMSE-K and K-MMSE were significantly different by sex groups and by .age groups, respectively(p<0.05). The mean scores of ADL were significantly different by age groups(p<0.01) not by sex groups. Among the 4 components of ADL(instrumental activities of daily living(IADL), self care, orientation, and mobility), the mean score of the orientation was significantly higher in men(p<0.01); and IADL, orientation and mobility components were significantly different by age groups(p<0.01). ADL correlated well with MMSE-K (r=0.54) and K-MMSE(r=0.52) and showed higher correlation in female (r=0.73, 0.71) than male(r=0.27, 0.29). IADL and orientation showed significant correlation with MMSE-K(r=0.52, 0.62) and K-MMSE(r=0.50, 0.63), respectively(p<0.01). Conclusions. In developing and establishing a care model for people with dementia in the community, both cognitive impairment and the activities of daily living(ADL) need to be considered.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.538-553
• /
• 1999

The purpose of this study was to compare the shear bond strength and the anticariogenicity of glass ionomer cement with conventional bonding resin and fluoride releasing resin. After the shear bond strength test, scanning electron microscopic observation was performed for the evaluation of the fracture patterns in each group. Under the polarizing light microscope, artificially induced carious lesions were evaluated and the lesion depths of the samples were measured using image analyzing program(Image-Pro $PLUS^{TM}$, USA). 50 sound maxillary premolars were used for the bond strength test and another 30 for the anticariogenic test. Data collected were analyzed statistically using Oneway-ANOVA and Scheffe test. The results were as follows: 1. Glass ionomer groups(G-III, IV, V) generally showed the lower bond strength values than resin groups(G-I, II). 2. Among the two resin groups, G-I showed the higher bond strength than G-II without statistically significant difference between them(p>.05). 3. Within glass ionomer groups, statistical significance was found between G-III and G-V with the superior bond strength in G-V (p<.05). 4. Under the SEM, adhesive failure was the predominant fracture pattern in G-I and II, whereas cohesive failures were mainly observed in G-III. In G-IV and V, mixed type of pattern where the both fracture patterns coexisted within samples could be seen. 5. In evaluation of the depth of artificially developed carious lesion, glass ionomer group showed shallower depth than resin groups with statistical significance between G-III and G-I, II(p<.05). Among resin groups, fluoride releasing resin(G-II) showed the shallower depth than conventional resin(G-I)(p<.05).

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.3
• /
• pp.28-36
• /
• 2009

While existing literature has focused extensively on the strengths and weaknesses of the Chaebol and their ownership and governance, there have been few studies of Korean non-Chaebol firms. However, Lee, Lee and Pennings (2001) did not specifically investigate the competitive strategies that non-Chaebol firms use to survive against the Chaebol in the domestic Korean market. The motivation of this paper is to document, through four exploratory case studies, the successful competitive strategies of non-Chaebol Korean companies against the Chaebol and then offer some propositions that may be useful to other entrepreneurial firms as well as public policy makers. Competition and cooperation as conceptualized by product similarity and cooperative inter.firm relationship respectively, are major dimensions of firm.level marketing strategy. From these two dimensions, we develop the following $2{\times}2$ matrix, with 4 types of competitive strategies for non-Chaebol companies against the Chaebol (Fig. 1.). The non-Chaebol firm in Cell 1 has a "me-too" product for the low-end market while conceding the high-end market to a Chaebol. In Cell 2, the non-Chaebol firm partners with a Chaebol company, either as a supplier or complementor. In Cell 3, the non-Chaebol firm engages in direct competition with a Chaebol. In Cell 4, the non-Chaebol firm targets an unserved part of the market with an innovative product or service. The four selected cases such as E.Rae Electronics Industry Company (Co-exister), Intops (Supplier), Pantech (Competitor) and Humax (Niche Player) are analyzed to provide each strategy with richer insights. Following propositions are generated based upon our conceptual framework: Proposition 1: Non-Chaebol firms that have a cooperative relationship with a Chaebol will perform better than firms that do not. Proposition 1a; Co-existers will perform better than Competitors. Proposition 1b: Partners (suppliers or complementors) will perform better than Niche players. Proposition 2: Firms that have no product similarity with a Chaebol will perform better than firms that have product similarity. Proposition 2a: Partners (suppliers or complementors) will perform better than Co.existers. Proposition 2b: Niche players will perform better than Competitors. Proposition 3: Niche players should perform better than Co-existers. Proposition 4: Performance can be rank.ordered in descending order as Partners, Niche Players, Co.existers, Competitors. A team of experts was constituted to categorize each of these 216 non-Chaebol companies into one of the 4 cells in our typology. Simple Analysis of Variance (ANOVA) in SPSS statistical software was used to test our propositions. Overall findings are that it is better to have a cooperative relationship with a Chaebol and to offer products or services differentiated from a Chaebol. It is clear that the only profitable strategy, on average, to compete against the Chaebol is to be a partner (supplier or complementor). Competing head on with a Chaebol company is a costly strategy not likely to pay off for a non-Chaebol firm. Strategies to avoid head on competition with the Chaebol by serving niche markets with differentiated products or by serving the low-end of the market ignored by the Chaebol are better survival strategies. This paper illustrates that there are ways in which small and medium Korean non-Chaebol firms can thrive in a Chaebol environment, though not without risks. Using different combinations of competition and cooperation firms may choose particular positions along the product similarity and cooperative relationship dimensions to develop their competitive strategies-co-exister, competitor, partner, niche player. Based on our exploratory case-study analysis, partner seems to be the best strategy for non-Chaebol firms while competitor appears to be the most risky one. Niche players and co-existers have intermediate performance, though the former do better than the latter. It is often the case with managers of small and medium size companies that they tend to view market leaders, typically the Chaebol, with rather simplistic assumptions of either competition or collaboration. Consequently, many non-Chaebol firms turn out to be either passive collaborators or overwhelmed competitors of the Chaebol. In fact, competition and collaboration are not mutually exclusive, and can be pursued at the same time. As suggested in this paper, non-Chaebol firms can actively choose to compete and collaborate, depending on their environment, internal resources and capabilities.

• Journal of Periodontal and Implant Science
• /
• v.33 no.4
• /
• pp.625-641
• /
• 2003

Background: This study presents a biomechanical and histometric comparison of bone response to implants with various area of hydroxyapatite(HA) coating. Methods: The implants were placed in the tibia of 10 rabbits weighing 2.5-3.5kg. The control group had a machined surface, the experimental group 1 had 50${\mu}m$ thick HA coated in a band form, and the experimental group 2 had 50${\mu}m$ thick HA coated on the entire surface. 8 weeks after implantation, the animals were sacrificed. Removal torque was measured and histologic preparation was also performed for histologic and histometric analysis. Bone to implant contact as well as percentage of bone area inside threads were measured. ANOVA post hoc, and t-test were used for statistical analysis with p-value p<0.05. Results: 1. The removal torques were 9.36${\pm}$5.64 Ncm, 48.40 ${\pm}$ 16.66 Ncm, and 82.37${\pm}$22.56 Ncm for the control, exp. 1, and exp. 2 group respectively. Statistically significant difference were found among all the groups(p<0.05). 2. Bone to implant contact in the cortical bone were 38.94${\pm}$10.9 %, 66.90${\pm}$14.1 %, 73.00${\pm}$19.4 %, in the marrow bone, 8.30${\pm}$5.4%, 14.59${\pm}$5.9%, 18.54${\pm}$11.8%, and in total, 22.40${\pm}$10.1%, 31,17${\pm}$7.5%, 41.41${\pm}$12.2% for the control, exp. 1, and exp. 2 group respectively . In the cortical bone, exp. 1, and exp. 2 group showed statistically significantly higher contact compared to control group. Total contact and in the marrow bone, only exp. 2 group showed statistically significantly higher contact compared to control group(p<0.05). In all the groups significantly higher contact were observed in the cortical bone compared to the marrow bone(p<0.05). 3. Percentage of bone area inside threads in the cortical bone were 55.68${\pm}$7.25%, 55.19${\pm}$13.19%, 57.04${\pm}$13.33%, in the marrow bone, 12.34${\pm}$14.61%, 17.56${\pm}$20.04%, 20.26${\pm}$12.83%, and in total, 30.30${\pm}$12.46%, 31.57 ${\pm}$15.15%, 34.25${\pm}$12.56% for the control, exp.1, and exp. 2 group respectively. There was no statistical difference among the groups. In all the groups significantly higher bone area were observed in the cortical bone compared to the marrow bone(p<0.05)

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.699-716
• /
• 1998

This study was designed to evaluate the expression of non-collagenous protein in periodontal tissue during the experimental movement of rat incisors, by LSAB(labelled streptavidine biotin) immunohistochemical staining for osteonectin and osteocalcin. Twenty seven Sprague-Dawley rats were divided into a control group(3 rats) and 6 experimental groups(24 rats) where 75g of force was applied from helical springs across the maxillary incisors. Rats of experimental groups were sacrificed at 12 hours, 1, 4, 7, 14 and 28 days after force application, respectively. And the tissues of a control group and experimental groups were studied immunohistochemically and histologically. The results were as follows : 1. Until 28 days after force application, periodontal fibers had been strectched on tension side and compressed in pressure side of all the experimental groups, and the arrangement of periodontal fibers had not been recovered yet. 2. The expression of osteonectin in control group was rare in dentin, cementum and osteocyte, and was mild in odontoblasts and matrix of alveolar bone. 3. The expression of osteocalcin in control group was negative in gingiva, osteoblasts, osteocyte and cementum, and was rare in predentin, capillaries in pulp and periodontal ligament and the matrix of alveolar bone. 4. There was no difference in the expression of osteocalcin or osteonectin in dentin, cementum, pulp, odontoblasts, between of control and of experimental groups. 5. The expression of osteonectin in intermaxillary suture got the peak in 7-day and was declined after 14-day. The expression of osteocalcin remained in a same degree since it became mild in 14-day. 6. The expression of osteonectin in pressure side of periodontal ligament of experimental group was rare, which was similar to control group. But in tension side, it was increased until 14-day aftrer which it was declined. 7. The expression of osteocalcin in periodntal ligament was rare in 12-hour to 14-day, but became severe in 28-day, which was greater in tension side than in pressure side, and in the periodontal fiber next to alveolar bone than to tooth surface. 8. The expression of osteocalcin in alveolar bone was rare until 14-day in pressure side, but became moderate in 28-day. The expression of osteonectin was increased from 7-day by time dependency, which was greater in tension side than in pressure side.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.4
• /
• pp.67-85
• /
• 2011

The purpose of this study was to find out how to operate Technology Home Economics in the 2009 revised national curriculum and Home Economics teachers perception on the current states in the middle schools, focused on intensive course-taking, block-time, and total hours to take the course. Data were collected from the 118 Home Economics teachers nationwide through e-mail from May 25 to June 4, 2011, and analyzed with frequencies, percentage, means, t-test, cross-tabulations, and ANOVA. The results showed that Technology Home Economics was intensively taken in the most of all schools(91.5%) during 4 semesters by senior and freshmen or junior. Teachers were relatively less involved in the decision making process for intensive course-taking than did the school managers and dissatisfied with the fact of intensive course-taking. But a few school adopted block-time and most teachers did not think it was necessary. Over half of schools offered the same 16 hours of Technology Home Economics as in the previous 2007 revised curriculum, but nearly 2 out of 5 schools reduced the hours from 1 to 8 with an average of 2.8 hours. To keep the necessary hours to teach the full contents of Technology Home Economics should be protected. The follow-up research needs to be conducted to investigate the changes in the perception of Home Economics teachers.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.82-94
• /
• 1984

The variation of stomatal density and stomatal length of four species of oaks was studied for the purpose of examining the differences among populations and among individual trees within population. Nine populations of Quercus mongolica, four populations of Q. serrata and Q. variabilis respectively, and three populations of Q. acutissima were selected in the natural stands of oaks distributed through the whole country. Twelve leaves were sampled from each of 20 trees from each population. The length of 20 stomata and ten replications of stomatal density were measured from collodion replicas of each leaf under a microscope. Average stomatal densities and lengths ranged through $600-1000/mm^2$ and $19-26{\mu}m$ respectively in all of the species studied. The stomatal densities and lengths presented significant differences statistically at the level of 1 or 5% among populations and among individual trees within population in all the species. Quercus mongolica, especially, showed large variation among populations, while Q. variabilis did very narrow variation compared to the other species. The coefficients of variation of stomatal densities and lengths among individual trees within population exhibited small values of 3.7-12.0% and 1.4-5.3% respectively in all the populations of the species. The average stomatal densities of Q. mongolica showed statistically significant correlation of multiple correlation coefficient of $R_{df{\cdot}2.6}=0.868^*$ and multiple regression equation of $Y=0.041X_1(G.M.T.S.)+0.489X_2(G.M.H.S.)+22.37$ with the sum of growing season mean daily temperature and the sum of growing season mean daily humidity of the stand studied. However the average stomatal lengths showed no relation with the same meteological variables. The figures of frequency distribution of the measurements of leaves or the mean values of individual trees did not show normal distribution curves in some populations. The curves, as well as the results of ANOVA, exhibited the differences among populations.

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.190-199
• /
• 2003

This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.188-195
• /
• 2011

Objectives: The purpose of this study was to evaluate the polymerization shrinkage stress among conventional methacrylate-based composite resins and a silorane-based composite resin. Materials and Methods: The strain gauge method was used for the determination of polymerization shrinkage strain. Specimens were divided by 3 groups according to various composite materials. Filtek Z-250 (3M ESPE) and Filtek P-60 (3M ESPE) were used as a conventional methacrylate-based composites and Filtek P-90 (3M ESPE) was used as a silorane-based composites. Measurements were recorded at each 1 second for the total of 800 seconds including the periods of light application. The results of polymerization shrinkage stress were statistically analyzed using One way ANOVA and Tukey test (p = 0.05). Results: The polymerization shrinkage stress of a silorane-based composite resin was lower than those of conventional methacrylate-based composite resins (p < 0.05). The shrinkage stress between methacrylate-based composite resin groups did not show significant difference (p > 0.05). Conclusions: Within the limitation of this study, silorane-based composites showed lower polymerization shrinkage stress than methacrylate-based composites. We need to investigate more into polymerization shrinkage stress with regard to elastic modulus of silorane-based composites for the precise result.

• The Korean Journal of Elementary Counseling
• /
• v.7 no.2
• /
• pp.101-115
• /
• 2008

The purposes of this study were to consist an anger control program in order to help children confirm and modify their cognitive errors in peer anger-provoking situations(Lee Mi-gyeong, 2006), that and to examine the effects of this program on anger-provoking experience, anger controllability and peer relationship. The cognitive-behavioral anger control program was consisted of 16 sessions. The focus of the program were placed on perceiving angry feelings, confirming automatic thinking and cognitive errors and acquiring how to correct the cognitive errors(1st-10th sessions), and checking cognitive errors in 13 anger-provoking situations and practicing way to correct the errors(11th-15th sessions). To examine the effects of the program, 10 children who had a lot of anger-provoking experiences, and were poor at anger control and faced difficulties with peer relationship were selected. The cognitive-behavioral anger control program was implemented for eight weeks, twice a week, 40 minutes each. The collected data were analysed by the ANOVA method using the SPSS and Kwakstat(Kwak Ho-wan, 1993). What cognitive errors children made and how they modified the errors during the program were checked. The findings of the study were as follows: The cognitive-behavioral anger control program served to cut down on the anger-provoking experiences, to improve their anger controllability, to boost their peer relationship, and that effect lasted till six weeks later. And the cognitive errors they made during the program were in the order as follows: stating the oughtness of their behavior, followed by naming, seeing everything in black and white, emotional judgment, mind reading, linking the situation to themselves, overgeneralizing, and hasty conclusion. The ways to correct the cognitive errors were in the order as follows: putting oneself in another's place, explaining in a different manner, looking for proof, thinking of it is so difficult to indure, thinging of there is moral to it, and thinking of how angry after passing time.