• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.846-852
• /
• 2012

The result of imaging segmentation becomes different with the parameters involved in the segmentation algorithms; therefore, the parameters for the optimal segmentation have been found through a try and error. In this paper, we propose the method to find the best values of parameters involved in the area-based active contour method using three-way ANOVA. The segmentation result applied by three-way ANOVA is compared with the optimal segmentation which is drawn by user. We use the global consistency rate for comparing two segmentations. Finally, we estimate the main effects and interactions between each parameter using three-way ANOVA, and then calculate the point and interval estimate to find the best values of three parameters. The proposed method will be a great help to find the optimal parameters before working the motion segmentation using piecewise constant model.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.5
• /
• pp.623-631
• /
• 2022

Using the design of experiment (DOE), factors affecting the particle size of hydrated liquid crystalline vesicles containing a high content of ceramide were analyzed and the mixture composition was optimized. Manufacturing temperature, amount of ethanol, and ultrasonic time were selected as the main variables affecting the droplet size of the vesicles, and the effect of these variables on the droplet size was examined through the signal to noise (S/N) ratios of Taguchi method and ANOVA analysis. In addition, mixture composition experiments of three lipid components constituting the vesicle membrane, hydrogenated phosphatidyl choline (HPC), cholesterol (Chol), and ceramide (Cer), were performed according to the simplex central design matrix of the mixture. Regression analysis was conducted with the experimental data to obtain a model equation, and the optimal mixing composition of the three lipid components to minimize the vesicle droplet size was determined as HPC (0.6), Chol (0.1), and Cer (0.3).

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.10 no.1
• /
• pp.93-115
• /
• 1999

This Study is the summary of studies in analysis of‘Lecture Evaluation’made at H university where such evaluation for every course established has been carried out since 1990. This contains the contents of questionnaire drawn up through OMR scanner which has 7 fields with 10 items respectively. to investigate the general direction of the results, results of evaluation by lectures, different results of evaluation by fields, and the like. I applied such techniques of statistical analysis as T-test, analysis of variance table(Anova-table), and Regression analysis to examine the most important factor of successful lecturing.

• Journal of Broadcast Engineering
• /
• v.18 no.5
• /
• pp.771-774
• /
• 2013

This study investigates the relationship between voice quality measurements and emotional states, in addition to conventional prosodic and cepstral features. Open quotient, harmonics-to-noise ratio, spectral tilt, spectral sharpness, and band energy were analyzed as voice quality features, and prosodic features related to fundamental frequency and energy are also examined. ANOVA tests and Sequential Forward Selection are used to evaluate significance and verify performance. Classification experiments show that using the proposed features increases overall accuracy, and in particular, errors between happy and angry decrease. Results also show that adding voice quality features to conventional cepstral features leads to increase in performance.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.975-982
• /
• 2005

The purpose of the Gage R&R study is to determine whether a measurement system is adequate for monitoring a process. If the measurement system variation is small relative to the process variation, then the measurement system is deemed 'adequate'. The sources of variation associated with the measurement system are compared using an analysis of variance (ANOVA) model, in general. A typical ANOVA model used in a standard Gage R&R study is the two-factor random effect model. Then, the ANOVA partitions the total variation into three categories: repeatability, reproducibility, part variation. However, if the process variation possesses the between group variation, within group variation, and within-part variation, these variations can cause the measurement system evaluation to provide misleading results. That is, in the standard Gage R&R study these variations affect the estimate of repeatability, reproducibility, or both. This paper presents a four-factor nested factorial ANOVA model which explicitly considers these variations for the Gage R&R study. The variance component estimates are derived by setting the EMS equations equal to the corresponding mean square from the ANOVA table and solving. And the proposed model is compared with the standard Gage R&R model.

• IE interfaces
• /
• v.18 no.4
• /
• pp.444-453
• /
• 2005

The purpose of the Gage R&R study is to determine whether a measurement system is adequate for monitoring a process. If the measurement system variation is small relative to the process variation, then the measurement system is deemed "adequate". The sources of variation associated with the measurement system are compared using an analysis of variance (ANOVA) model, in general. A typical ANOVA model used in a standard Gage R&R study is the two-factor random effect model. Then, the ANOVA partitions the total variation into three categories: repeatability, reproducibility, part variation. However, if the process variation possesses the between group variation, within group variation, and within part variation, these variations can cause the measurement system evaluation to provide misleading results. That is, in the standard Gage R&R study these variations affect the estimate of repeatability, reproducibility, or both. This paper presents a four-factor nested factorial ANOVA model which explicitly considers these variations for the Gage R&R study. The variance component estimators are derived by setting the EMS equations equal to the corresponding mean square from the ANOVA table and solving. And the proposed model is compared with the standard Gage R&R model.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.161-165
• /
• 2010

In the present study, process optimization for thermal-sprayed STS316 coating has been performed using $L_9(3^4)$ orthogonal array and analysis of variance (ANOVA). STS316 coatings were fabricated by flame spray process on steel substrate, and the hardness test and microstructure observation of the coatings were studied. The results of hardness test were analyzed by ANOVA. The ANOVA results showed that the spray distance had the greatest effect on hardness of the coating, on the other hands, the effects of oxygen gas flow and spray distance were ignorable. From these results, the optimal combination of the flame spray parameters could be derived, and confirmation experiment was carried out to verify these derived results. The calculated hardness of the coatings by ANOVA was found to approximately close to that of confirmation experimental result. Thus, it was considered that design of experiments using orthogonal array and ANOVA was effective for process optimization of thermal-sprayed STS316 coating.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.89-94
• /
• 2009

In this work, the optimal process has been designed by $L_9(3^4)$ orthogonal array and analysis of variance(ANOVA) for thermal-sprayed Ni-based hard coating. Ni-based hard coatings were fabricated by flame spray process on steel substrate. Then, the hardness test and observation of microstructure of the coatings were performed. The results of hardness test were analyzed by ANOVA. The ANOVA results demonstrated that the acetylene gas flow had the greatest effect on hardness of the coatings. The oxygen gas flow was found to have a neglecting effect. From these results, the optimal combination of the flame spray parameters could be predicted. The calculated hardness of the coatings by ANOVA was found to lie close to that of confirmation experimental result. Thus, it was considered that design of experiments design using orthogonal array and ANOVA was useful to determine optimal process of thermal-sprayed Ni-based hard coating.

• The Korean Journal of Applied Statistics
• /
• v.26 no.6
• /
• pp.873-887
• /
• 2013

The axis of rotation in biomechanics is a major tool to investigate joint function; therefore, many methods to estimate the axis of rotation have been developed. However, there exist several problems to describe, estimate, and test the axis statistically. The axis is directional data(axial data) and it should not be analyzed with traditional statistics. A proper comparative method should be considered to compare axis estimating methods for the same given data ANOVA (analysis of variance) is a frequently used statistical method to compare treatment means in experimental designs. In case of the axial data response assumed to come from Watson distribution, there are a few ANOVA method options. This study constructed ANOVA models for within-subjects designs of axial data. Two models (one within-subjects factor and two within-subjects factors crossed design) were considered. The empirical data used in this study were instantaneous axes of rotation of flexion/extension at the knee joint and the flexion/extension and pronation/supination at the elbow joint. The results of this study can be further applied to the various analysis of experimental designs.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.6
• /
• pp.1525-1536
• /
• 2016

ROTC is the system that selects the best students in university and implements the military training of two years and uses them as beginning commander of the army by commissioning as officers. ROTC makes up a very large portion of the army and society in Korea in terms of the size and role. Therefore, it is very important to enhance intangible combat power of the Korean army by improving leadership of primary grade officer from ROTC. The purpose of this paper is to investigate whether or not ROTC candidate training program is providing the right training, so as to improve ROTC's leadership and present improvement plan. First, we divide ROTC candidate training program into three areas and take the 1st and 2nd survey. Then we compare and analyze the actual condition and recognition of investigation using statistical analysis methods such as chi-square test, ANOVA and Duncan's multiple range test. Also, we analyze the element affecting the army leader's three qualities formation which are basic elements of ROTC cadet's leadership using multiple regression analysis.