• Biomedical Science Letters
• /
• v.16 no.2
• /
• pp.113-118
• /
• 2010

The purpose of this study was to investigate the effects of angular velocity on muscle strength and blood constituent. Subjects was classified into two groups, which were $60^{\circ}/sec$ angular velocity group (n=8), and $240^{\circ}/sec$ angular velocity group (n=8). Each group was applied to perform the isokinetic exercises on extensor muscle group for each 7 times in 10 set (3 days per a week for 3 weeks). Muscle strength was measured using peak torque of quadriceps femoris and blood constituent was measured using RBC, WBC and Hb. The peak torque was more significantly increased after 3 weeks application of $60^{\circ}/sec$ angular velocity group than $240^{\circ}/sec$ angular velocity group. The RBC and Hb were more significantly increased after 3 weeks application of $60^{\circ}/sec$ angular velocity group than $240^{\circ}/sec$ angular velocity group. But WBC was more significantly increased after 3 weeks application of $240^{\circ}/sec$ angular velocity group than $60^{\circ}/sec$ angular velocity group. These results indicate that $60^{\circ}/sec$ angular velocity isokinetic exercise application were effective treatment strategy on increase of muscle strength. But $240^{\circ}/sec$ angular velocity isokinetic exercise application were effective treatment strategy on immune protect system.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.3
• /
• pp.273-284
• /
• 2016

Objective: The purpose of this study was to investigate effects of upper limb, trunk, and pelvis kinematic variables on the velocity of Apkubi Momtong Baro Jireugi in Taekwondo. Method: Twenty Taekwondo Poomsae athletes (age: $20.8{\pm}2.2years$, height: $171.5{\pm}7.0cm$, body weight: $66.2{\pm}8.0kg$) participated in this study. The variables were upper limb velocity and acceleration; trunk angle, angular velocity, and angular acceleration; pelvis angle, angular velocity, and angular acceleration; and waist angle, angular velocity, and angular acceleration. Pearson's correlation coefficient was calculated for Jireugi velocity and kinematic variables; multiple regression analysis was performed to investigate influence on Jireugi velocity. Results: Angular trunk acceleration and linear upper arm punching acceleration had significant effects on Jireugi velocity (p<.05). Conclusion: We affirmed that angular trunk acceleration and linear upper arm punching acceleration increase the Jireugi velocity.

• The Journal of Korean Physical Therapy
• /
• v.27 no.2
• /
• pp.89-95
• /
• 2015

Purpose: The purpose of this study is to determine the effects of visual information on movement time and each angular velocity of trunk and lower extremity joints while healthy adults are in sitting and squat motion. Methods: Participants consisted of 20 healthy male and female adults; movement time and each angular velocity of trunk, pelvis, hip, knee and ankle of sitting and squat motion according to common vision, visual task and visual block were analyzed using a three dimensional motion analysis system. Results: Each angular velocity of the trunk, pelvis, hip, knee and ankle in phase 2 of the sitting showed significant difference according to the types of visual information (p<0.05). Movement time and each angular velocity of pelvis and hip in phase 2 of squat motion showed significant difference according to the types of visual information (p<0.05). According to the common vision, each angular velocity of knee and ankle in phase 1 was significantly fast in sitting (p<0.05). According to the common vision, each angular velocity of trunk, pelvis, hip, knee, and ankle in phase 2 was significantly fast in sitting (p<0.05). Conclusion: Visual information affects the angular velocity of the motion in a simple action such as sitting, and that in more complicated squat motion affects both the angular velocity and the movement time. In addition, according to the common vision, visual task and visual block, as angular velocities of all joints were faster in sitting than squat motion.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.185-204
• /
• 2003

The purpose of this study was to obtain the data for stable and accurate techniques of the free throw in basketball. The subjects of this study were seven male basketball player consisted of college students athletes. Free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. The variables were the velocity, the angular velocity of the upper extremity segments, degree, and angular momentum. The result of analysis is summarized as follows. 1. The velocity and angular velocity of the upper extremity segment was showed an gradual increase and a smooth velocity transfer, transferring from proximal segment to distal segment at free throw motion in basketball. 2. The local term and remote term angular velocity momentum of the proximal segment showed larger than that of the distal segment in X, Y, Z axis component all. 3. The remote term angular momentum was showed larger than that of the local term angular momentum in X, Y, Z axis component all. 4. The angular motion of the upper trunk and upper arm, upper arm and forearm was showed in opposite direction and symmetrical angular momentum in local term angular momentum of the Y and Z axis component. 5. All the segments of upper extremity segment was showed left rotation in remote term angular momentum of the Y axis component and right rotation in remote term angular momentum of the Z axis component.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.210-213
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by axial distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increase with the die twisting angle and the aspect ratio of product and friction condition and reduction area and show that angular velocity increases with the decreases in die length.

• Journal of the Korean Society of Physical Medicine
• /
• v.4 no.3
• /
• pp.157-164
• /
• 2009

Purpose：The purpose of this study was to investigate the effects of angular velocity on muscle strength of biceps brachii. Methods：Subjects was classified into two groups, which were $60^{\circ}/sec$ angular velocity group(n=15) and $240^{\circ}/sec$ angular velocity group(n=15). Each group was applied to perform the isokinetic exercises on flexion muscle group for each 10 times in 3 set(3 days per a week for 2 weeks). Muscle strength was measured using peak torque of biceps brachii. Results：The results were as follows: The peak torque was significantly increased after $60^{\circ}/sec$ angular velocity isokinetic exercise application(p<.05), however, it was not significantly after $240^{\circ}/sec$ angular velocity isokinetic exercise application(p>.05). Conclusions：This study showed that $60^{\circ}/sec$ angular velocity isokinetic exercise application were effective treatment strategy on increase of muscle strength. Therefore, it could be considered as a treatment method in the athlete and patients with musculoskeletal disease.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.105-115
• /
• 2005

Recently among several tennis techniques forehand stroke has been greatly changed in the aspect of spin, grip and stance. The most fundamental factor among the three factors is the stance which consists of open, square and closed stance. The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle according to open, close, and square stance patterns during forehand stroke in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head angle were defined. In conclusion, the first hypothesis, "In three dimensional maximum linear velocity of racket head would be significant difference among the stance patterns during forehand stroke in tennis" was rejected. The second hypothesis, "In three dimensional anatomical angular displacement of trunk would be significant difference among the stance patterns during forehand stroke in tennis" was rejected and the result showed that the internal-external rotation showed most important role among the three dimensional anatomical angular displacement of trunk The third hypothesis, "In three dimensional anatomical angular displacement of upperlimb would be significant difference among the stance patterns during forehand stroke in tennis" was rejected and the result showed that The three dimensional anatomical angular displacement of shoulder joint showed most important role in forehand stroke. Flexion-extension and internal-external rotation the open stance showed the largest angular displacement and is follwed by square stance and closed stance. The fourth hypothesis, "In three dimensional anatomical angular velocity of upperlimb would be significant difference among the stance patterns during forehand stroke in tennis" was rejected and the result showed that X-axis angular velocity and Z-axis angular velocity the square stance showed the largest angular velocity of the trunk and X-axis angular velocity and Y-axis angular velocity the closed stance showed the largest angular velocity of the shoulder joint.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.8
• /
• pp.29-36
• /
• 2008

An optical rotary encoder is easy to implement for automation system applications. In particular, the output of the encoder has a digital form pulse, which is also easy to be connected to a popular digital controller. By using an incremental encoder and a counting device, it is easy to measure angular displacement, as the number of the output pulses is proportional to the rotational displacement. This method can only detect the angular placement once a pulse signal comes out of the encoder. The angular displacement detection period is strongly subject to the change of the angular displacement in case of ultimate low velocity range. They have ultimate long detection period or cannot even detect angular displacement at near zero velocity. This paper proposes an algorithm for detecting angular displacement by using a dual encoder system with two encoders of normal resolution. The angular displacement detecting algorithm is able to keep detection period moderately at near zero velocity and even detect constant angular displacement within nominal period. It is useful for motion control applications in case of changing rotational direction at which there occurs zero velocity. In this paper, various experimental results are shown for the angular displacement detection algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2024

Objective: The aim of this study was to identify the biomechanical determination factor for improving club head speed during the driver swing in male golf players. Method: Twenty-seven golf players were participated in this study. Eight motion capture cameras (250 Hz) and two force plates (2,000 Hz) were used to collect peak angular velocity and ground reaction force data. It was performed stepwise multiple linear regression analysis and alpha set at .05. Results: The peak plantar flexion angular velocity of the left ankle joint and the peak adduction angular velocity of the right shoulder joint were statistically significant. The peak plantar flexion angular velocity of the left ankle joint and the peak adduction angular velocity of the right shoulder during downswing. Conclusion: It is suggested that applying body conditioning training aimed at improving related body functions to increase maximum plantar flexion angular velocity in the left ankle joint will be effective in improving club head speed.

• Transactions of Materials Processing
• /
• v.7 no.4
• /
• pp.340-346
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of the extruded products with elliptical shapes from round billet. The twisting of extruded product is caused by the lin-early increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product in creases with the die twisting angle, the aspect ratio of product the friction condition, the reduction of area, and decreases with the die length.