• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.628-635
• /
• 2014

The large amount of $CO_2$ emitted from mushrooms during incubation and developmental stages can be utilized in plant production systems as a $CO_2$ source. The objectives of this study were to measure the $CO_2$ emission and absorption rates of mushroom and lettuce, respectively, and to analyze the $CO_2$ concentrations at various ratios of mushroom and lettuce in a closed production system. The $CO_2$ emission rate of king oyster mushrooms (Pleurotus eryngii ( DC.) Qu$\acute{e}$l) and $CO_2$ absorption rate of lettuces (Lactuca sativa L. cv. Asia Heuk Romaine) were measured by using two closed acryl chambers ($1.0m{\times}0.8m{\times}0.5m$) in which indoor temperatures were maintained at $18^{\circ}C$ and $22^{\circ}C$, respectively. The lettuce was grown at a light intensity of PPF $340mol{\cdot}m^{-2}{\cdot}s^{-1}$ and with nutrient solution at EC $1.2dS{\cdot}m^{-1}$. The air was periodically circulated between the two chambers using a diaphragm pump. The $CO_2$ emission rate of the mushroom increased until the $15^{th}$ day after scratching (DAS) and then decreased. The rate also increased with increased indoor temperature. In particular, the $CO_2$ emission rate per fresh weight of fruit body increased by about 3.1 times after thinning compared to before thinning. In terms of $CO_2$ balance, the $CO_2$ emission rates from a bottle (950 mL) of the mushroom at 9, 12, and 14 DAS were equivalent to those of 3, 4.5, and 5.5 lettuce plants at 7, 10, and 12 DAT (days after transplanting), respectively. This work shows that balance in $CO_2$ concentration could be achieved using an appropriate ratio of the two crops in a closed production system.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.673-683
• /
• 2014

This study was conducted to establish an efficient screening method to identify cucurbits resistant to powdery mildew. Powdery mildew fungus was obtained from a single lesion of infected cucumber leaf in 2010 at Daejeon. The fungus was identified as Podosphaera xanthii race 1 based on morphological characteristics and resistance responses of four melon differentials. Development of powdery mildew caused by the fungal isolate on 34 commercial cultivars of cucumber was investigated at three plant growth stages in a greenhouse. The degree of resistance of cotyledons of each cultivar to the fungus was not correlated with that of whole plant, but powdery mildew occurrence in the first true leaf was highly correlated with resistance at the level of the whole plant. Based on these results, the first true leaf of cucurbit cultivars can be used for screening of resistance to powdery mildew. In addition, variation of resistance of commercial 12 cucumber and 26 melon cultivars to the powdery mildew fungus due to different growing seasons was tested. In the case of cucumber, the resistance response in some cultivars was influenced by growing season. The resistant cultivars showed higher resistance in the warm season than in the cool season. By contrast, the resistant melon cultivars demonstrated strong resistance in all the tested growing seasons. Interestingly, the tested powdery mildew pathogen, a member of P. xanthii race 1, was not pathogenic on seven cultivars of watermelon (Citrullus lanatus). To follow up on this, diverse race 1 isolates of P. xanthii should be collected and tested.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.77-83
• /
• 2015

Frequent pattern mining, which is one of the major areas actively studied in data mining, is a method for extracting useful pattern information hidden from large data sets or databases. Moreover, frequent pattern mining approaches have been actively employed in a variety of application fields because the results obtained from them can allow us to analyze various, important characteristics within databases more easily and automatically. However, traditional frequent pattern mining methods, which simply extract all of the possible frequent patterns such that each of their support values is not smaller than a user-given minimum support threshold, have the following problems. First, traditional approaches have to generate a numerous number of patterns according to the features of a given database and the degree of threshold settings, and the number can also increase in geometrical progression. In addition, such works also cause waste of runtime and memory resources. Furthermore, the pattern results excessively generated from the methods also lead to troubles of pattern analysis for the mining results. In order to solve such issues of previous traditional frequent pattern mining approaches, the concept of representative pattern mining and its various related works have been proposed. In contrast to the traditional ones that find all the possible frequent patterns from databases, representative pattern mining approaches selectively extract a smaller number of patterns that represent general frequent patterns. In this paper, we describe details and characteristics of pattern condensing techniques that consider the maximality or closure property of generated frequent patterns, and conduct comparison and analysis for the techniques. Given a frequent pattern, satisfying the maximality for the pattern signifies that all of the possible super sets of the pattern must have smaller support values than a user-specific minimum support threshold; meanwhile, satisfying the closure property for the pattern means that there is no superset of which the support is equal to that of the pattern with respect to all the possible super sets. By mining maximal frequent patterns or closed frequent ones, we can achieve effective pattern compression and also perform mining operations with much smaller time and space resources. In addition, compressed patterns can be converted into the original frequent pattern forms again if necessary; especially, the closed frequent pattern notation has the ability to convert representative patterns into the original ones again without any information loss. That is, we can obtain a complete set of original frequent patterns from closed frequent ones. Although the maximal frequent pattern notation does not guarantee a complete recovery rate in the process of pattern conversion, it has an advantage that can extract a smaller number of representative patterns more quickly compared to the closed frequent pattern notation. In this paper, we show the performance results and characteristics of the aforementioned techniques in terms of pattern generation, runtime, and memory usage by conducting performance evaluation with respect to various real data sets collected from the real world. For more exact comparison, we also employ the algorithms implementing these techniques on the same platform and Implementation level.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2015

As information technology fusion is accelerated, the researches to improve the quality and productivity of crops inside a plant factory actively progress. Advanced growth environment management technology that can provide thermal environment and air flow suited to the growth of crops and considering the characteristics inside a facility is necessary to maximize productivity inside a plant factory. Currently running plant factories are designed to rely on experience or personal judgment; hence, design and operation technology specific to plant factories are not established, inherently producing problems such as uneven crop production due to the deviation of temperature and air flow and additional increases in energy consumption after prolonged cultivation. The optimization process has to be set up in advance for the arrangement of air flow devices and operation technology using computational fluid dynamics (CFD) during the design stage of a facility for plant factories to resolve the problems. In this study, the optimum arrangement and air flow of air circulation fans were investigated to save energy while minimizing temperature deviation at each point inside a plant factory using CFD. The condition for simulation was categorized into a total of 12 types according to installation location, quantity, and air flow changes in air circulation fans. Also, the variables of boundary conditions for simulation were set in the same level. The analysis results for each case showed that an average temperature of 296.33K matching with a set temperature and average air flow velocity of 0.51m/s suiting plant growth were well-maintained under Case 4 condition wherein two sets of air circulation fans were installed at the upper part of plant cultivation beds. Further, control of air circulation fan set under Case D yielded the most excellent results from Case D-3 conditions wherein air velocity at the outlet was adjusted to 2.9m/s.

• Journal of the Korean Society of Food Culture
• /
• v.5 no.1
• /
• pp.169-180
• /
• 1990

An experimental study on the effect of milk diet on carcinogenesis induced by N-methyl-N-nitro-N-nitrosoguanidine (MNNG) was designed in rats to elucidate its mechanism. A total of 136 Sprague-Dawley rats were divided into 6 groups according to the milk dosagnes in each diet. The entire group of 136 rats was fed the MNNG (100 g/ml) and milk for the initial 28 weeks. Thereafter for the next 12 weeks the group was fed a normal diet only. After this 40 week experiment 109 rats survived. These rats were then dissected with the results being summarized as follows: Suppression of gastroduodenal malignancy was evidenced by the increase of milk concentration in the diet except for the group given MNNG and the lowest concentration of milk (6% milk). Significant differences in the rate of cancer association were present between the regenerative hyperplasia (22.2%) and adenomatous hyperplasia (57.9%). The incidence of benign lesions increased proportionally with the concentration of milk in the diet, especially in regenerative hyperplasia. In the group which had been given the lowest concentration of milk there was a significant increase of the serum gastrin level in the rats with gastric cancer or precancerous benign lesions like regenerative hyperplasia or adenomatous hyperplasia.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.13-18
• /
• 2004

This study was designed to establish working range for reoportable range in own laboratory in order to cover the upper and lower limits of the range in test method. We experimented ten times during 10 days for setting of reportable range with between run for method evaluation. It is generally assumed that the analytical method produces a linear response and that the test results between those upper and lower limits are then reportable. CLIA recommends that laboratories verify the reportable range of all moderate and high complexity tests. The Clinical Laboratory Improvement Amendments(CLIA) and Laboratory Accreditation Program of the Korean Society for Laboratory Medicine states reportable range is only required for "modified" moderately complex tests. Linearity requirements have been eliminated from the CLIA regulations and from others accreditation agencies, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. It is important to assess the useful reportable range of a laboratory method, i.e., the lowest and highest test results that are reliable and can be reported. Manufacturers make claims for the reportable range of their methods by stating the upper and lower limits of the range. Instrument manufacturers state an operating range and a reportable range. The commercial linearity material can be used to verify this range, if it adequately covers the stated linear interval. CLIA requirements for quality control, must demonstrate that, prior to reporting patient test results, it can obtain the performance specifications for accuracy, precision, and reportable range of patient test results, comparable to those established by the manufacturer. If applicable, the laboratory must also verify the reportable range of patient test results. The reportable range of patient test results is the range of test result values over which the laboratory can establish or verify the accuracy of the instrument, kit or test system measurement response. We need to define the usable reportable range of the method so that the experiments can be properly planned and valid data can be collected. The reportable range is usually defined as the range where the analytical response of the method is linear with respect to the concentration of the analyte being measured. In conclusion, experimental results on reportable range using concentrated control sample and zero calibrators covering from highest to lowest range were salicylate $8.8{\mu}g/dL$, phenytoin $0.67{\mu}g/dL$, phenobarbital $1.53{\mu}g/dL$, primidone $0.16{\mu}g/dL$, theophylline $0.2{\mu}g/dL$, vancomycine $1.3{\mu}g/dL$, valproic acid $3.2{\mu}g/dL$, digitoxin 0.17ng/dL, carbamazepine $0.36{\mu}g/dL$ and acetaminophen $0.7{\mu}g/dL$ at minimum level and salicylate $969.9{\mu}g/dL$, phenytoin $38.1{\mu}g/dL$, phenobarbital $60.4{\mu}g/dL$, primidone $24.57{\mu}g/dL$, theophylline $39.2{\mu}g/dL$, vancomycine $83.65{\mu}g/dL$, valproic acid $147.96{\mu}g/dL$, digitoxin 5.04ng/dL, carbamazepine $19.76{\mu}g/dL$, acetaminophen $300.92{\mu}g/dL$ at maximum level.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.2
• /
• pp.128-141
• /
• 2012

This study focused on the historic documents known as $deungnok$, records created during preparations for royal events in the $Joseon$ Dynasty, rather than the often cited $uigwe$, the documents describing the Royal Protocol of the $Joseon$ Dynasty. As a reference to the food served at royal banquets, the $deungnok$ can enhance our understanding of royal banquet foods. Seven specimens of $deungnok$ describing royal banquet foods are currently in existence, created during preparations for royal events by the agencies in charge of food, the $Saongwon$ and $Jeonseonsa$. Owing to the nature of their authorship, the details recorded in these $deungnok$ hold great value as important resources for the study of royal banquet cuisine. $Naeoejinyeon$-$deungnok$, which documented an $oejinyeon$ banquet held at the $Junghwajeon$ Pavilion in November 1902, was somewhat disorganized and fragmented. $Jinyeonuigwe$ was more inclusive and well-summarized, since the former were progress reports to the King during banquet preparations that listed various items separately, such as dishes for each table setting and the kinds of flower pieces, and thus did not present a complete picture of all the details as a whole. The latter, on the other hand, were final reports created upon completion of a banquet, and contained more comprehensive records not only of the $chanpum$ (the menu of dishes served), but also the sorts of tableware and tables, floral arrangements, location, scale, and installation date of the $sukseolso$ (temporary royal kitchens for banquets). They also offer a more effective summary by simplifying details duplicated in identical table settings. Nevertheless, the $Naeoejinyeon$-$deungnok$ recorded some facts that cannot be gleaned from the $Jinyeonuigwe$, including the height of some dishes presented in piled stacks, as well as the specific names of dishes and their ingredients. The comparative study of the historic records in the $deungnok$ and $uigwe$ will be helpful in identifying and understanding the specific foods served at royal banquets. The $oejinyeon$-$seolchando$ diagrams in $Naeoejinyeon$-$deungnok$ depict the table settings for the King and the Crown Prince. The two diagrams contain large rectangles divided into three sections. In each section are similar-sized circles in which the names of dishes and the titles for table settings are recorded. From these records we can see that the arrangements of the table settings for the King and the Crown Prince are similar. The relationships and protocols shown in the arrangement of dishes and table settings for the King and the Crown Prince at royal banquets in the $Seolchando$ appear to be consistent. By comparing the two references, $deungnok$ and $uigwe$, which recorded the dishes served at royal banquets, the author was able to determine the height of some foods served in stacked arrangements, the names of $chanpum$, the ingredients used, and the configuration of the $chanpum$. The comparative review of these two written records, $deungnok$ and $uigwe$, will be helpful for a proper understanding of the actual food served at royal banquets.

• Journal of Food Hygiene and Safety
• /
• v.6 no.1
• /
• pp.1-12
• /
• 1991

Fischer 344 rats aged six weeks were diYided into four groups and group 1, 2, and 3 of rats were given an intraperitoneal injection of diethylnitrosamine at 200 mg/kg body weight and group 4 was given saline alone. Two weeks after beginning of the experiment, group 1 and 2 of rats were begun to feed on diets containing 0.02% 2-acetylaminofluorene as a promoter for four weeks. Three weeks after beginning of the experiment, all groups were performed partial hepatectomy. During the last two weeks, group 1 and 3 of rats were received subcutaneously 3 consecutive weekly doses of iron dextran at 0.125 ml/100 g body weight. Subcutaneous injection of iron dextran resulted in hepatic siderosis in group 1 and 3 of rats. Pre neoplastic nodules were identified histopathologically by two markers, resistance to exogenous iron accumulation and glutathione S-transeferase placental form (GST-P) activity, while early carcinogen induced foci were hardly resistant to iron accumulation and though a few lesions were identified, it could hardly be distincted from normal hepatocytes of surroundings. However, GST-P positive nodules as well as foci were clearly distincted from normal hepatic cells of surroundings. In the quantitative analysis of carcinogen-induced nodules and foci, more lesions were detected by immunohistochemical method for GST-P than by prussian blue staining for resistant to iron accumulation. It is concluded that immunohistochemical marker for GST-P is more sensitive and reliable than iron-resistance marker, and that iron-resistance is not useful marker for early detection of carcinogen-induced hepatic lesions.

• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.301-305
• /
• 2012

This study was conducted to investigate the microbiological contamination levels in rice cakes and rice flour due to climate change in three areas classified to their temperature and precipitation. We investigated the contamination levels of total aerobic bacteria, coliforms, Escherichia coli, Bacillus cereus, Staphylococcus aureus, Clostridium perfringens of rice flour and 3 rice cakes such as Garaetteok, Sirutteok and Gyeongdan. Contamination levels of total aerobic bacteria in rice flour were 4.9 log CFU/g. In a total of 70 rice flour, yeasts & molds and coliforms were detected in 42 and 52 samples at the levels of 43 CFU/g and 1.29 log CFU/g, respectively. S. aureus were detected in only 1 rice flour (1.66 log CFU/g) out of 70. In an investigation of contamination levels in rice cakes, the population of total aerobic bacteria were highest in Gyeongdan (5.18 log CFU/g) and coliforms were highest in Gareattock (2.93 log CFU/g). There was no detection of E. coli and B. cereus except for only 1 Gareattock (1.20 log CFU/g). There were no differences of contamination levels among the three areas. If constant monitoring of rice cakes and rice flour is conducted on the basis of this study, it is expected to be able to analyze the change of contamination levels in rice cakes and rice flour due to climate change.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.367-375
• /
• 2010

The bacteriological and physiochemical analysis of sea water and sediments in Tongyeong harbor was conducted to evaluate sanitary conditions. The samples were collected at 8 stations established once a month from June, 2008 to May, 2009. During the study period, the range of temperature was from 6.7 to $25.2^{\circ}C$, transparency ranged from 1.2 to 2.6 m, chemical oxygen demand ranged from 1.90 to 2.92 mg/L, dissolved oxygen ranged from 6.2 to 10.5 mg/L, dissolved nitrogen ranged from 0.052 to 0.098 mg/L, phosphate ranged from 0.044 to 0.065 mg/L, respectively. Seafood, if eaten raw, carries the risk of food poisoning. Seafood poisoning is often cause by pathogenic microorganism originating from fecal contamination, such as Salmonella sp., Shigella sp. and norovirus. Fecal coliforms are an important indicator of fecal contamination. Therefore, data on fecal coliform are very important for evaluating the safety of fisheries in coastal areas. So, we investigated the sanitary indicate bacteria. The coliform group and fecal coliform MPN's of sea water in Tongyeong harbor were ranged from < 1.8~22,000/100 mL (GM 164.9 MPN/100 mL) and < 1.8~7,900 MPN/100 mL (GM 33.7 MPN/100 mL), respectively. Total coliform were detected 97.0% in 96 of samples and 68.9% of total coliforms were fecal coliforms. These results similar to another seawater detection ratio of total coloforms and fecal coliforms. The Vibrios was isolated and identified with VITEK system. Four hundred eighty strains that were obtained from sea water samples in Tongyeong harbor Detection ratio Vibrio alginolyticus, 34.2%, Vibrio parahaemolyticus, 13.8%, Vibrio vulnificus 10.0%, and V. mimicus 12.5% respectively. Vibrio cholerae O1, was not detected. During the study period, the ranges of water content, ignition loss, COD, and acid volatile sulfates in sediments in Tongyeoung harbor were 41.0~57.4%, 7.8~10.5%, 6.51~9.30 mg/g, 0.04~0.09 mg/g, respectively. Heavy metals in sediment of Tongyeoung harbor were Cd, $0.10{\pm}0.05$; Cu, $4.79{\pm}8.20$; As, $1.95{\pm}0.17$; Hg, $0.10{\pm}0.07$; $Cr^{6+}$, $0.34{\pm}0.12$; Zn, $125.33{\pm}16.40$; Ni, $16.43{\pm}1.93$ mg/kg.