• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.942-949
• /
• 2020

In this paper, we propose an improved algorithmic ADC for CMOS Image Sensor that is suitable for a column-parallel readout circuit. The algorithm of the conventional algorithmic ADC is modified so that it can operate as a single amplifier while being independent of the capacitor ratio and insensitive to the gain of the op-amp, and it has a high conversion efficiency by using an adaptive biasing amplifier. The proposed ADC is designed with 0.18-um Magnachip CMOS process, Spectre simulation shows that the power consumption per conversion speed is reduced by 37% compared with the conventional algorithmic ADC.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.23-26
• /
• 2004

본 논문은 전력증폭기의 효율을 개선하기 위한 도허티증폭기의 특성 분석에 관한 것이다. 도허티증폭기의 특성을 분석하기 위해 2-tone신호와 WCDMA신호를 사용하였고 180W PEP LDMOSFET을 사용하였다. 제작된 도허티증폭기는 출력 전력 20W에서 약 10%정도의 효율개선을 나타냈지만 선형성이 저하되는 특성을 나타내었다. 저하된 선형성을 개선시키기 위해 carrier 증폭기(Amp. A)와 peaking 증폭기(Amp. B)를 각각 변화하였으며, carrier 증폭기는 높은 PEP(Peak Envelope Power)와 적은 Id(drain current)가 되도록 하였고, peaking 증폭기는 높은 이득과, 낮은 gate bias에서 IMD(Intermodulation Distortion)가 상쇄되도록 하였다. 최종 측정 결과 출력전력 20W에서 선형성은 class AB증폭기와 비교하여 유사한 결과를 얻었으며, 효율은 약 10% 이상의 개선을 얻을 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1117-1120
• /
• 2003

In this paper, a 1.5V CMOS high frequency operational amplifier for high frequency signal processing systems is presented. For obtaining the high gain and the high unity gain frequency with the 1.5V supply voltage, the op-amp is designed with simple two stages which are consisting of the rail-to-rail differential input stage and the class-AB output stage. The designed op-amp operates with the 1.5V supply voltage, and shows well the push-pull class-AB operation. The simulation results show the DC open loop gain of 77dB and the unity gain frequency of 100MHz for the 1㏁ ┃ 10pF load. When the resistive load R$_1$. is varied from 1㏁ to 1 ㏀, the DC open loop gain decreases by only 4dB.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1359-1368
• /
• 1989

In this paper, the composite BiCMOS transistor which combines a bipolar transistor and a MOS transistor in a cascade type, is analyzed in terms of I-V characteristics and small signal equivalent circuit. As a result, it has a larger driving capability than MOS transistor and a more extended rante of input voltage than bipolar transistor. Next, a BiCMOS differential amplifier as its application example is designed and compared with the CMOS one and the bipolar one. It increases the driving capability of the CMOS differential amp and improves the linear operation region of the bipolar differential amp.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.83-91
• /
• 1990

VOC(coltage controlled oscillator) circuits are necessary in applications such at the demodul-ation of FM signals, frequency synthesizer, and for clock recovery from digital data. In this paper, we designed the VCO circuit based on a OTA(operational transconductance amplifier) and the OP amp which using a differential amplifier by BiCMOS circuit. It consists of a OTA, voltage contorolled integrator and a schmitt trigger. Conventional VCO circuits are designed using the CMOS circuit, but in this paper we designed newly BiCMOS VCO circuit which has a good drive avlity, As a result of SPICE simulation, output frequency is 141KHz at 105KHz, and sensitivity is 15KHz.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.59-63
• /
• 1990

Two-stage TEA(transversely excited atmospheric pressure) CO2 laser amplifier system, Amp I and Amp II are consturcted and their amplification characteristics are investigated theoretically and experimentally. Multiple-wire corona preionization method is used for uniform discharge in laser oscillator and amplifiers. At optimumm gas ratio, CO2 : N2 : He = 1 : 1 : 3, output pulse energy of the oscillator is 0.4J and finally two-stage amplification gives 1.5J output energy which is larger than pumping threshold of para-H2 Raman laser. The rate equations of the amplifiers are solved numerically, and the results are compared with the experimental results. In conclusion, the small signal gain cocfficient of AMP I is 0.025/cm and that of AMP II is 0.02/cm.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.38-41
• /
• 2001

To reduce the wasted power with using an OP-AMP, 3 circuit supplying the same amount of power to load through overall voltage range can able proposed. With this type of design, the power that induced to the devices in the circuit will be reduced, we can also develope a small size power supply with the OP-AMP developed using this design. If we need a OP-AMP needed to handle higher power than usual, another design technique can be proposed. With substituting one device with the devices connected in series, the power loaded to each devices in the series devices can be reduced. This thesis contents the design of an OP-AMP to use in high power fields with small thermal dissipation.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.149-150
• /
• 2015

압전 마이크로머신 초음파 트랜스듀서(Piezoelectric micro-machined ultrasonic transducers)는 DC 바이어스 전압을 인가해야 구동되는 특성을 가지고 있다. 따라서 초음파 트랜스 듀서를 구동하기 위한 전력증폭기는 DC 바이어스 전압이 요구되므로 기존의 전력증폭기에 비해 효율이 매우 낮아지게 된다. 이를 해결하기 위해 본 논문에서는 압전 마이크로머신 초음파 트랜스듀서를 구동하기 위한 고효율 전력증폭기를 제안한다. 전력증폭기는 AMP부와 전원부로 나뉘며, AMP부는 Class B Amp를 사용하여 높은 증폭 선형성을 갖는다. 전원부는 Amp를 구동하기위한 DC-DC converter가 에너지 회수 동작을 하므로 전력증폭기의 효율을 높일 수 있다. 본 연구에서는 압전 마이크로머신 초음파 트랜스듀서를 구동하기 위한 전력증폭기 회로를 제시하고 시뮬레이션과 실험을 통해 동작 특성을 검증한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.39-46
• /
• 2009

A fast-switching current-pulse driver for light emitting diode (LED) backlight is proposed. It uses a regulated drain current mirror (RD-CM) [1] and a high-voltage NMOS transistor (HV-NMOS). It achieves the fast-response current-pulse switching by using a dynamic gain-boosting amplifier (DGB-AMP). The DGB-AMP does not discharge the large HV-NMOS gate capacitance of the RD-CM when the output current switch turns off. Therefore, it does not need to charge the HV-NMOS gate capacitance when the switch turns on. The proposed current-pulse driver achieves the fast current switching by removing the repetitive gate discharging and charging. Simulation results were verified with measurements performed on a fabricated chip using a 5V/40V 0.5um BCD process. It reduces the switching delay to 360ns from 700ns of the conventional current-pulse driver.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1011-1014
• /
• 2003

We proposed a new two-stage operational amplifier that increases the slew rate by adding some simple circuitry to the conventional structure. The proposed circuit is simulated by HSPICE and the slew rate of the proposed circuit is improved more than 10 times than that of conventional one in slewing state without considerable increments in area and power consumption.