• Journal of Intelligence and Information Systems
• /
• v.16 no.3
• /
• pp.121-145
• /
• 2010

University timetabling depending on the educational environments of universities is an NP-hard problem that the amount of computation required to find solutions increases exponentially with the problem size. For many years, there have been lots of studies on university timetabling from the necessity of automatic timetable generation for students' convenience and effective lesson, and for the effective allocation of subjects, lecturers, and classrooms. Timetables are classified into a course timetable and an examination timetable. This study focuses on the former. In general, a course timetable for liberal arts is scheduled by the office of academic affairs and a course timetable for major subjects is scheduled by each department of a university. We found several problems from the analysis of current course timetabling in departments. First, it is time-consuming and inefficient for each department to do the routine and repetitive timetabling work manually. Second, many classes are concentrated into several time slots in a timetable. This tendency decreases the effectiveness of students' classes. Third, several major subjects might overlap some required subjects in liberal arts at the same time slots in the timetable. In this case, it is required that students should choose only one from the overlapped subjects. Fourth, many subjects are lectured by same lecturers every year and most of lecturers prefer the same time slots for the subjects compared with last year. This means that it will be helpful if departments reuse the previous timetables. To solve such problems and support the effective course timetabling in each department, this study proposes a university timetabling support system based on two phases. In the first phase, each department generates a timetable template from the most similar timetable case, which is based on case-based reasoning. In the second phase, the department schedules a timetable with the help of interactive user interface under the timetabling criteria, which is based on rule-based approach. This study provides the illustrations of Hanshin University. We classified timetabling criteria into intrinsic and extrinsic criteria. In intrinsic criteria, there are three criteria related to lecturer, class, and classroom which are all hard constraints. In extrinsic criteria, there are four criteria related to 'the numbers of lesson hours' by the lecturer, 'prohibition of lecture allocation to specific day-hours' for committee members, 'the number of subjects in the same day-hour,' and 'the use of common classrooms.' In 'the numbers of lesson hours' by the lecturer, there are three kinds of criteria : 'minimum number of lesson hours per week,' 'maximum number of lesson hours per week,' 'maximum number of lesson hours per day.' Extrinsic criteria are also all hard constraints except for 'minimum number of lesson hours per week' considered as a soft constraint. In addition, we proposed two indices for measuring similarities between subjects of current semester and subjects of the previous timetables, and for evaluating distribution degrees of a scheduled timetable. Similarity is measured by comparison of two attributes-subject name and its lecturer-between current semester and a previous semester. The index of distribution degree, based on information entropy, indicates a distribution of subjects in the timetable. To show this study's viability, we implemented a prototype system and performed experiments with the real data of Hanshin University. Average similarity from the most similar cases of all departments was estimated as 41.72%. It means that a timetable template generated from the most similar case will be helpful. Through sensitivity analysis, the result shows that distribution degree will increase if we set 'the number of subjects in the same day-hour' to more than 90%.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.117-138
• /
• 2000

This study is, from the view point of constructive social studies which is the foundation of the 7th curriculum, to explore whether there is any viable program and to investigate it by which students, using photo resources in social studies, can organize their knowledge in the way of self-directed thinking. The main results are as follows: If it is a principle of knowledge construction process of constructive social studies that individual construction (cognitive construction) develops into communal construction(social construction) and yet communal construction develops itself, interacting with individual construction, it will be meet the objectives of social studies. In social studies, photos are a powerful communication tool. communicating with photos enables to invoke not only the visual aspects but also invisible aspects of social phenomena from photos. It, therefore, can help develop thinking power through inquiry learning, which is one of the emphasis of the 7th curriculum. Having analyzed photo resources appeared on the regional textbooks in elementary social studies, they have been appeared that even though the importance and amount of space photo resources occupy per page is big with regard to total resources, most of the photos failed to lad to self-directed thinking but just assistant material in stead. Besides, there appeared some problems with the title, variety, size, position, tone of color, visibility of the photos, and further with the combination of the photos. Developing of photo resources for constructive social studies is to overcome some problems inherent in current text books and to reflect the theoretical background of the 7th curriculum. To develop the sort of photo that can realize the point just mentioned, it would be highly preferable to provide photo database to facilitate study with homepage through web-based interaction. To take advantage of constructive photo resources, the instruction is strategized in four stages, intuition, conflict, accommodation, and equilibration stage. With the advancement of the era of image culture, curriculum developers are required to develop dynamic, multidimensional digital photos rather than static photos when develop text books.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.1
• /
• pp.40-50
• /
• 1990

The purpose of this paper is to develop a colorant from krill, Euphausia superba, process wastes for use in food products. Carotenoproteins were extracted from preboiled krill processing offal(PKPO) and raw frozen krill processing offal(RKPO) with the aid of proteolytic enzymes. The long-term stability of the astaxanthin associated with the carotenoprotein by the addition of pretense inhibitor and antioxidant to the product were also investigated. Total astaxanthin contents of PKPO and RKPO were $35.1mg\%,\;22.1mg\%$ and those in carotenoproteins were $98.6mg\%,\;61.9mg\%$, respectively. The chitin contents of PKPO and RKPO were $6.9\%,\;4.5\%$, however, those of carotenoproteins were not determined. When $0.5\%$ trypsin was added to the extraction medium containing 0.5M $Na_3EDTA$ at $4^{\circ}C,\;74\%$ of astaxanthin and $83\%$ of the protein of PKPO were recovered as carotenoprotein in 24hrs. The amino acid profile in carotenoprotein was mainly composed of glutamic acid, methionine, aspartic acid and isoleurine. Their contents amounted to about 40% of the total amino acids, followed by alanine, phenylalanine, Iysine, leucine, threonine and tyrosine in that order, with a small amount of cysteine and tryptophan. The levels of essential amino acids were high as much as $38.3\%\~43.6\%$ of the total amino acids. The maximum observance of the carotenoid fraction from krill processing offal and from carotenoprotein was 469nm in petroleum ether. The separated components of carotenoprotein by TLC had Rfs $0.20\~0.23\;0.56\~0.60$ and $0.88\~0.91$. The carotenoids were comprised of astaxanthin, astaxanthin monoester and asthaxanthin diester in $25\~30\%\;,35\~40\%$and $40\~45\%$, respectively. The loss of carotenoids in the carotenoprotein can be prevented by the addition of pro-tease inhibitor(trasylol) and antioxidant(BHT) below $4^{\circ}C$.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.45-52
• /
• 2014

The Ubiquitous-City (U-City) is a smart or intelligent city to satisfy human beings' desire to enjoy IT services with any device, anytime, anywhere. It is a future city model based on Internet of everything or things (IoE or IoT). It includes a lot of video cameras which are networked together. The networked video cameras support a lot of U-City services as one of the main input data together with sensors. They generate huge amount of video information, real big data for the U-City all the time. It is usually required that the U-City manipulates the big data in real-time. And it is not easy at all. Also, many times, it is required that the accumulated video data are analyzed to detect an event or find a figure among them. It requires a lot of computational power and usually takes a lot of time. Currently we can find researches which try to reduce the processing time of the big video data. Cloud computing can be a good solution to address this matter. There are many cloud computing methodologies which can be used to address the matter. MapReduce is an interesting and attractive methodology for it. It has many advantages and is getting popularity in many areas. Video cameras evolve day by day so that the resolution improves sharply. It leads to the exponential growth of the produced data by the networked video cameras. We are coping with real big data when we have to deal with video image data which are produced by the good quality video cameras. A video surveillance system was not useful until we find the cloud computing. But it is now being widely spread in U-Cities since we find some useful methodologies. Video data are unstructured data thus it is not easy to find a good research result of analyzing the data with MapReduce. This paper presents an analyzing system for the video surveillance system, which is a cloud-computing based video data management system. It is easy to deploy, flexible and reliable. It consists of the video manager, the video monitors, the storage for the video images, the storage client and streaming IN component. The "video monitor" for the video images consists of "video translater" and "protocol manager". The "storage" contains MapReduce analyzer. All components were designed according to the functional requirement of video surveillance system. The "streaming IN" component receives the video data from the networked video cameras and delivers them to the "storage client". It also manages the bottleneck of the network to smooth the data stream. The "storage client" receives the video data from the "streaming IN" component and stores them to the storage. It also helps other components to access the storage. The "video monitor" component transfers the video data by smoothly streaming and manages the protocol. The "video translator" sub-component enables users to manage the resolution, the codec and the frame rate of the video image. The "protocol" sub-component manages the Real Time Streaming Protocol (RTSP) and Real Time Messaging Protocol (RTMP). We use Hadoop Distributed File System(HDFS) for the storage of cloud computing. Hadoop stores the data in HDFS and provides the platform that can process data with simple MapReduce programming model. We suggest our own methodology to analyze the video images using MapReduce in this paper. That is, the workflow of video analysis is presented and detailed explanation is given in this paper. The performance evaluation was experiment and we found that our proposed system worked well. The performance evaluation results are presented in this paper with analysis. With our cluster system, we used compressed $1920{\times}1080(FHD)$ resolution video data, H.264 codec and HDFS as video storage. We measured the processing time according to the number of frame per mapper. Tracing the optimal splitting size of input data and the processing time according to the number of node, we found the linearity of the system performance.

• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.166-173
• /
• 1985

The multiple ear and tiller line (MET), which was selected from a local maize collection and has been selected for earliness by selfing for five generations, was compared its plant characteristics with four U.S. leading hybrids. 1. The general plant growth was a little retarded by poor soil fertility and structure. 2. The fresh weight of the MET line was about 97.8% of the U.S. check varieties. 3. The dry weight of the MET line was also about 94.5% of the check U.S. hybrids (1,695 kg / 10a.). 4. The tillering and eating habits of the MET line had contributed toward increasing fresh and dry weight of the MET line. 5. The average plant height of the MET line was much less than those of the check varieties, due to the selfing depression manifested by the MET line, (234.7cm. of the MET vs 250.7cm. of the check) 6. Apparent differences of disease resistance was observed among varieties studied. The degree of plants infected with the black stripe mosaic virus was over 20% for the check U.S. hybrids, while less than 5% of the MET line was infected with the disease. 7. The grain yield per 10 a of the MET line was far below the check hybrids due to the inbreeding depression of the MET line. However, the kernel number per unit area of the MET line with small size kernel was much greater than that of the check hybrids. The 100 kernel weight of the MET line was around 10 grams. 8. The average fresh and dry matter weight of the three ($sorghum{\times}sudan$ grass) varieties was very much alike with those of the MET line. 9. In conclusion, the use of the MET line for silage production may have dual adventages because of its low seed price and of its small size kernels, which may reduce the amount of seeds required for planting in an unit area.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.98-113
• /
• 2007

Objective: The purpose of this study was to evaluate the displacement pattern and the stress distribution shown on a finite element model 3-D visualization of a dry human skull using CT during the retraction of upper anterior teeth. Methods: Experimental groups were differentiated into 8 groups according to corticotomy, anchorage (buccal: mini implant between the maxillary second premolar and first molar and second premolar reinforced with a mini Implant, palatal: mini implant between the maxillary first molar and second molar and mini implant on the midpalatal suture) and force application point (use of a power arm or not). Results: In cases where anterior teeth were retracted by a conventional T-loop arch wire, the anterior teeth tipped more postero-inferiorly and the posterior teeth moved slightly in a mesial direction. In cases where anterior teeth were retracted with corticotomy, the stress at the anterior bone segment was distributed widely and showed a smaller degree of tipping movement of the anterior teeth, but with a greater amount of displacement. In cases where anterior teeth were retracted from the buccal side with force applied to the mini implant placed between the maxillary second premolar and the first molar to the canine power arm, it showed that a smaller degree of tipping movement was generated than when force was applied to the second premolar reinforced with a mini implant from the canine bracket. In cases where anterior teeth were retracted from the palatal side with force applied to the mini implant on the midpalatal suture, it resulted in a greater degree of tipping movement than when force was applied to the mini implant between the maxillary first and second molars. Conclusion: The results of this study verifies the effects of corticotomies and the effects of controlling orthodontic force vectors during tooth movement.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.224-233
• /
• 2021

Purpose: The purpose of this study was to retrospectively evaluate the effect of 'Blocking Kirschner Wire (K-Wire) Technique', which has been developed to reduce protrusion of the lateral wall, in maintaining the level of reduction through clinical and radiological outcomes. Materials and Methods: Twenty-two patients with displaced intra-articular calcaneal fractures who used the blocking K-wire to maintain reduction (group A) and 44 patients that did not use blocking K-wire and were paired in 1:2 ratio with those Group A patients (group B), between January 2015 and December 2017 were enrolled in the study. All surgical procedures were performed via the extended sinus tarsi approach, and internal fixation using cannulated screws, Steinmann pins and K-wires was performed. American Orthopaedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot scale and postoperative recovery of exercise ability were compared for postoperative clinical outcomes. The radiological results were compared the Böhler angle, Gissane angle, calcaneal height and width, step off of posterior calcaneal joint, and the degree of protrusion of the lateral wall. Moreover, postoperative complications in both groups were compared. Results: There were no significant differences in the clinical outcomes of the two groups (p=0.924, p=0.961). The amount of Böhler angle, Gissane angle, calcaneal height and width, and step off of posterior calcaneal joint from the radiological results was not significantly different between the two groups (p=0.170, p=0.441, p=0.230, p=0.266, and p=0.400). However, the degree of protrusion of the lateral wall was 1.78 mm and 4.95 mm in group A and group B, respectively, and the difference between the two groups was significant (p=0.017). Although sural nerve entrapment and painful exostosis were more frequent in group B, they were occurred in a non-significant manner (p=0.293, p=0.655). Conclusion: Most of the clinical and radiological results as well as the complications were not significantly different between the two groups. However, the degree of protrusion of the calcaneus lateral wall in group A was promising. The 'Blocking K-Wires Technique' established by the authors may be an effective surgical option for maintaining the reduction of the lateral wall protrusion in displaced intraarticular calcaneal fractures.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.429-455
• /
• 2002

There are numerous kind of materials and techniques to regenerate the periodontal tissue which has been lost due to destructive periodontal disease, including bone graft material. Many bone graft materials have been reported and among these materials, synthetic material has been developed fin the long time because of its sufficient supply economically. Calcium sulfate which was evaluated as including much calcium, has been used in the clinical field. In the dental field calcium sulfate has been used as bone graft material and Kim reported that improved bone formation and more amount of new attachment after grafting calcium sulfate. but, because calcium sulfate has the problem that it generates the heat in setting period and resolves fast, we need to evaluate the effect of the improved calcium sulfate on periodontal tissue. The present study evaluates the effect of paste type calcium sulfate on the epithelial migration, alveolar bone regeneration, cementum formation and gingival connective tissue attachment in intrabony defect in dogs. Four millimeter deep and four millimeter wide 3-wall defects were surgically created in the mesial or distal aspects of premolars or molars. the test group received paste-type calcium sulfate with a flap procedure and the control group underwent flap procedure only. Histologic analysis after 8 weeks of healing revealed the following results : 1. The length of epithelial growth(the distance from CEJ to the apical end of JE) was 0.52${\pm}$0.26mm in the control and 0.56${\pm}$0.25mm in the test group. there was no statistically significant difference between the two groups. 2. The length of connective tissue adhesion was 1.74${\pm}$1.06mm in the control and 1.28${\pm}$0.57mm in the test group. there was no statistically significant difference between the two groups. 3. The length of new bone was 2.01${\pm}$0.95mm in the control and 2.62${\pm}$0.81mm in the test group. there was no statistically significant difference between the two groups. 4. The length of new cementum was 1.86${\pm}$0.80mm in the control and 2.77${\pm}$ 0.86mm in the test group. there was a statistically significant difference between the two groups.(P<0.01) These results suggest that the use of paste type calcium sulfate in 3-wall intrabony defects has significant effect on new cementum formation , but doesn't have any significant effect on the prevention of junctional epithelium migration and new bone formation. Finally, the paste type calcium sulfate that is used in this study is suggested to be the material that can have a significant effect on the periodontal healing, if its biocompatibility is improved.

• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.238-245
• /
• 2007

This survey was performed to elucidate whether pesticide can cause the non-spinning syndrome of silkworm, Bombyx mori in Yecheon and Sangju 2002. We primarily focused to Insect Growth Regulator Pesticides(IGR) used in that areas. In the result of the survey to the retail pesticide store at Yecheon and Sangju, seven pesticides of the total 12 IGR pesticides sold were used during spring sericuitural season. 7 pesticides might effect on silkworm in consideration of possibility of exposure according to the characteristics of used amount, spray drift, volatility and treatment time. Five chitin synthesis inhibitor involving diflubenzuron of 7 IGR pesticides were known as very toxic to silkwork after exposure by skin and feeding but no non-spinning syndrome was observed from several papers. Methoxyfenozide and tebufenozide also has used at sericultural season, but are ecdysone agonist. One of the most feasible suspect of non IGR pesticide, was molinate in consideration of its volatility property and wide spread use in the sericultural area. But it's symptom after exposure of molinate was not the same as the non-spinning syndrome broke out at the sericultural farm in Yecheon and Sangju.

• Journal of The Korean Association For Science Education
• /
• v.18 no.1
• /
• pp.93-108
• /
• 1998

This study investigated science textbooks used from 1906 to 1915 in Korea, which is often neglected in previous researches. By doing so, more practical and specific understanding of the science education during that period can be made. It was based on the historical achieves "School Textbook List"(Vol. $4{\sim}9$) which was published by the Ministry of Education and the Government General of Chosen and other sources. The results and conclusions of the research are as follow; (1) The science textbooks which have been used from 1906 to 1915 in Korea can be categorized into three different tapes of books, either written in Chinese, or in Japanese, or in Korean. The names of science textbooks were Nature Study, Physics, Chemistry, Natural History, Hygienics, Physiology, Zoology, Botany, Astronomy, Physiography, Mineralogy, Geology. These names were much broader than those in curriculum settled by the government and rather correspond to the names of science textbooks in curriculum which settled by private schools. Therefore those science textbooks had been mainly used in private schools. Moreover almost all of the science textbooks published in Korea have started to appear after 1906. Since then many schools were newly opened and the number of students increased. It is possible to say that substantial science education in Korea established after 1906. (2) Science textbooks from 1906 to 1915 printed in Korea were controlled in their use by the Ministry of Education and the Government General of Chosen. They were the main means of government regulations, supported by Private School Ordinance, Regulations for Official Examination of textbooks in 1908 and Law of Publication in 1909. According to the result of official examination, as the time went by under the Japanese ruling of Korea, the increasing number of science textbooks were getting banned. While the science textbooks had enjoyed more freedom than the other textbooks from the control by inspection of the Government General of Chosen, the situation has been significantly changed as Japan started to intensity the control of all kinds of textbooks in Korea. Although there were a lot of copied science textbooks, 62 science textbooks printed in Korea, 72 Japanese science textbooks were used in Korea, and 40 Korean were to be engaged in science education compiling and copying science textbooks. There developments in science textbooks alone suggest that there were enormous amount of potentials in Korean science education at that time. However, all of these effects and progresses were destroyed when the sovereign authority of Korea was lost to Japan in 1910.