• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1995년도 춘계학술대회
• /
• pp.130-130
• /
• 1995

AM, SM 및 ASA는 수용액중에서 겉보기 1차반응에 따라 분해되었으며 보존온도가 높을수록 분해가 촉진되는 온도 의존성을 나타내었다. AM의 분해경로는 pH 1.22 및 pH 7.0 이상에서는 AM$\longrightarrow$ SM $\longrightarrow$ SA의 경로로 주로 분해되었으며 pH 2.01 - 6.08의 범위에서는 AM $\longrightarrow$ASA$\longrightarrow$SA의 경로로 분해되는 양상을 보였다. 또 pH가 분해에 미치는 영향을 pH-rate profile로 나타낸 결과 AM, SM 및 ASA의 최대안정 pH는 각각 4.0, 3.0, 2.0 부근이 있고 이 조건에서의 분해 반감기는 114, 168, 113 hr로 나타났다. 전체적으로 보면 pH 2.0 이하에서는 ASA가 AM 보다 약간 안정한 편이나 pH 2.0-8.0 사이에서는 AM의 분해속도가 ASA보다 현저히 낮았다. 또 AM은 pH 7.0 이상에서, SM은 pH 6.0 이상에서, ASA는 9.0 이상에서 특수염기촉매반응에 따라 분해가 이루어지는 것을 알 수 있었다. 이온강도($\mu$)의 영향으로는 pH 7.0에서 이온강도가 0.115에서 1.0으로 증가할수록 $\mu$$^{1}$2/에 대해 AM의 분해속도정수가 직선적으로 완만하게 감소되었다. 또 완충수용액 중 AM의 가수분해 억제효과를 검토하기 위해 시클로덱스트린류를 첨가하였을 때, $\beta$-시클로덱스트린과 히드록시프로필기-$\beta$-시클로덱스트린은 AM의 분해를 각각 1.6배 및 1.1배 촉진시켜 촉매적으로 작용하였으며 디메칠-$\beta$-시클로덱스트린은 약 3.2배 분해속도를 억제시켜 안정화제로 작용하였다.Zn^{2+}$, soybean trypsin inhibtor에 의해 25～50% 정도, serine proteinase inhibitor인 phenylmethylsulfonyl floride에 의해 80%정도 활성이 억제되는 특성이 있음을 규명하였다.면역환성 (immunoreactivity)이 나타났고 pyramidal cell layer (PCL)와 glia에 SOD-1이 강하게 염색되었다. APT 병용 투여로 상당수의 경련이 일어나지 않은 흰쥐는 해마의 DG에 FRA가 경미하게 염색되었고, PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에 의한 제거가 가능하다. 한편 이같

• 한국자원식물학회지
• /
• 제2권2호
• /
• pp.259-278
• /
• 1989

입암산 지역에 분포되어 있는 한약자원식물을 채집 분류하여 이용체계 확립의 수단으로 삼고자, 이 지역의 약용식물의 종류를 조사한 결과는 다음과 같았다. 1. 입암산에 분포되어 있는 한약자원 식물은 100 과, 252 속, 337 종이었다. 2. 분석수종중 초본류는 59 과, 169 속, 220 종, 목본류는 50 과, 85 속, 117 종이었다. 3. 초본류는 주으로 전초를 사용하며 수본류는 기, 수피 및 과실을 주로 약용으로 이용하는 것이 많았다.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1412-1420
• /
• 2018

An experiment was performed using the large-scale test facility (LSTF), which simulated a 1% vessel upper head small-break loss-of-coolant accident with an accident management (AM) measure under an assumption of total-failure of high-pressure injection (HPI) system in a pressurized water reactor (PWR). In the LSTF test, liquid level in the upper head affected break flow rate. Coolant was manually injected from the HPI system into cold legs as the AM measure when the maximum core exit temperature reached 623 K. The cladding surface temperature largely increased due to late and slow response of the core exit thermocouples. The AM measure was confirmed to be effective for the core cooling. The RELAP5/MOD3.3 code indicated insufficient prediction of primary coolant distribution. The author conducted uncertainty analysis for the LSTF test employing created phenomena identification and ranking table for each component. The author clarified that peak cladding temperature was largely dependent on the combination of multiple uncertain parameters within the defined uncertain ranges.

• 한국주조공학회지
• /
• 제22권5호
• /
• pp.245-251
• /
• 2002

Cast AZ91 and extruded AM50 alloys were isothermally heated as solid/liquid coexistent temperatures, and semi-solid formed into sheets. Mold filling ability of semi-solid slurry with different liquid fractions was investigated in relation to process variables such as injection speed and mold temperature. Relatively uniform distribution of solid particle size and liquid fraction were observed throughout the semi-solid formed sheet. AZ91 alloy sheets were also manufactured by conventional die casting and compared with the semi-solid formed. It was found that the surface was more smooth and the dimensional accuracy was higher in case of the semi-solid formed.

• 대한의용생체공학회:의공학회지
• /
• 제41권1호
• /
• pp.14-21
• /
• 2020

Recently, porous additive manufactured(AM) cages have been introduced to provide more desirable stiffness and may be beneficial to bone ingrowth. They are designed to attempt to reduce the subsidence problem of traditional titanium cage and to get osseointegrative property that PEEK doesn't have. This study was performed to evaluate the mechanical performance of newly developed lumbar porous AM cages. Three types of mechanical tests were performed in accordance with the ASTM standards: Static compression, compression-shear, and subsidence tests. The porous AM cages with 60% porosity showed similar device stiffness and strength as the various products submitted to FDA 510(k), and their wider contact area improved the subsidence test results by about 50%. In conclusion, the porous AM cages developed in this study were considered mechanically safe and could be an alternative to solid PEEK cages.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.3-10
• /
• 2022

An estimated investment gap of $176 billion needs to be filled over the next ten years to improve America's inland waterway transportation systems. Many of these infrastructure systems are now beyond their original 50-year design life and are often behind in maintenance due to funding constraints. Therefore, long-term maintenance strategies (i.e., asset management (AM) strategies) are needed to optimize investments across these waterway systems to improve their condition. Two common AM strategies include policy-driven maintenance and performance-driven maintenance. Currently, limited research exists on selecting the optimal AM approach for managing inland waterway transportation assets. Therefore, the goal of this study is to provide a decision model that can be used to select the optimal alternative between the two AM approaches by considering key uncertainties such as asset condition, asset test results, and asset failure. We achieve this goal by addressing the decision problem as a single-criterion problem, which calculates each alternative's expected value and certain equivalence using allocated monetary values to determine the recommended alternative for optimally maintaining navigable waterways. The decision model considers estimated and predicted values based on the current state of the infrastructure. This research concludes that the performance-based approach is the optimal alternative based on the expected value obtained from the analysis. This research sets the stage for further studies on fiscal constraints that will effectively optimize these assets condition.

• 한국의사학회지
• /
• 제23권2호
• /
• pp.89-101
• /
• 2010

Lee Jae Won is a scholar who wrote the most in Euirim, a representative Oriental Medical magazine after the liberation of Korea, on the Sa-am Acupuncture Method. In order to understand the principles of this method, he proposed rather distinctive theories called the Comparative Pulse Diagnosis and the Five Constitutions. Lee Jae Won distinguished the deficiency and exuberance of the Five Phases through the Comparative Pulse Diagnosis, and set harmonizing the Five Phases by tonifying the deficient and purging the exuberant as the object of the Sa-am Acupuncture Method. He took pulses from both the patient's hands and distinguished the deficiency and exuberance of the five viscera. Then, he balanced the Five Phases by tonifying the weakest viscus and purging the strongest viscus. Lee Jae Won argued that because the Five Constitutions are something that one has innately, people suffer from differnet diseases according to their constitutions. Therefore, he argued, when treating a patient, one should first decide the constitution of the patient and then treat the patient according to his/her deficiency or exuberance. From the late 50's to early 60's, Lee Jae Won wrote Acupuncture and Moxibustion According to Yin-Yang and the Five Phases, explaining the principles of the Sa-am Acupuncture Method and its applications. Seen from this, Lee Jae Won is a person from whom we can confirm the historical lineage of the Sa-am Acupuncture Method after the liberation of Korea.

• Animal Systematics, Evolution and Diversity
• /
• 제27권1호
• /
• pp.25-33
• /
• 2011

Three morphospecies of the genus Uronychia, i.e. U. setigera Calkins, 1902, U. binucleata Young, 1922, and U. multicirrus Song, 1997, were collected from the coastal waters of Gumjin-ri on the East Sea and the public waterfront of Incheon on the Yellow Sea in Korea, respectively. These species are described based on live observation, protargol impregnation, silver nitrate impregnation, and their morphometrics. Diagnostic keys for these species are also provided. In addition, their small subunit ribosomal DNA sequences were compared with previously known sequences of Uronychia species. Diagnostics of three Uronychia species are as follows: U. setigera: $50-80\;{\mu}m$ long in vivo, oval-shaped, 2 macronuclear nodules (Ma), 1 spur on the left margin, 11 adoral membranelles (AM) 1, 4 AM2, 1 buccal cirrus (BC), 4 frontal cirri (FC), 3 left marginal cirri (LMC), 2 ventral cirri (VC), 5 transverse cirri (TC), 3 caudal cirri (CC), 6 dorsal kineties (DK), and approximately 23 cilia in the leftmost kinety. U. binucleata: $70-110\;{\mu}m$ long in vivo, oval to slightly rectangular shaped, 2 Ma, 1 micronucleus (Mi), 2 spurs on the posterior region, 11 AM1, 4 AM2, 1 BC, 4 FC, 3 LMC, 2 VC, 5 TC, 3 CC, 6 DK, and approximately 37 cilia in the leftmost kinety. U. multicirrus: $140-200\;{\mu}m$ long in vivo, oval to slightly rectangular shaped, ca. 7 Ma, 1 Mi, 11 AM1, 4 AM2, 1 BC, 4 FC, 3 LMC, approximately 8 VC, 5 TC, 3 CC, and 6 DK. This study presents the first record of this genus in Korea.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.305-312
• /
• 2009

The effects of Quenching and Partitioning (Q&P) and Annealed Martensite (AM) heat treatment on the microstructure and tensile properties were investigated for 0.24C-0.5Si-1.5Mn-1Al steels. The Q&P steels were annealed at a single phase ($\gamma$) or a dual phase (${\gamma}+{\alpha}$), followed by quenching to a temperature between $M_s$ and $M_f$. Then, enriching carbon was conducted to stabilize the austenite through the partitioning, followed by water quenching. The AM steels were intercritically annealed at a dual phase (${\gamma}+{\alpha}$) temperature and austempered at $M_s$ and $M_s{\pm}50^{\circ}C$, followed by cooling in oil quenching. The dual phase Q&P steels showed lower tensile strength and yieldyield strength than those of the single phase Q&P steels, and tThe elongation for the dual phase Q&P steel was partitioning 100s higher than that of that for the single phase Q&P steels as the partitioning time was less than 100s up to partitioning 100s. For AM steels, the tensile/yield strength decreased and the total elongation increased as the austempering temperature increased. The stability of the retained austenite controlled the elongation for Q&P steels and the volume fraction of the retained austenite controlled the elongation for AM steels.

• 한국재료학회지
• /
• 제16권8호
• /
• pp.516-523
• /
• 2006

In recent years, Magnesium (Mg) and its alloys have become a center of special interest in the automobile industry. Due to their high specific mechanical properties, they offer a significant weight saving potential in modern vehicle constructions. Most Mg alloys show very good machinability and processability, and even the most complicated die-casting parts can be easily produced. The die casting process is a fast production method capable of a high degree of automation for which certain Mg alloys are ideally suited. In this study, step-dies and flowability tests for AM50 were performed by die-casting process according to various combination of casting pressure and plunger velocity. We were discussed to velocity effect of forming conditions followed by results of microstructure, FESEM-EDX, hardness and tensile strength. Experimental results represented that the conditions of complete filling measured die-casting pressure 400 bar, 1st plunger velocity 1.0 m/s and 2nd plunger velocity 6.0 m/s. The increasing of 2nd plunger velocity 4.0 to 7.0 m/s decreased average grain size of $\alpha$ phase and pore. It was due to rapid filling of molten metal, increasing of cooling rate and pressure followed by increased 2nd plunger velocity. The pressure should maintain until complete solidification to make castings of good quality, however, the cracks were appeared at pressure 800bar over.