• Title/Summary/Keyword: ALC

Search Result 208, Processing Time 0.03 seconds

Electrical, optical, and structural properties of IZTO films grown by co-sputtering method using ITO and IZO target (ITO와 IZO 타겟의 Co-sputtering 방법으로 성장시킨 IZTO 박막의 전기적 광학적 구조적 특성연구)

  • Jeong, Jin-A;Choi, Kwang-Hyuk;Moon, Jong-Min;Bae, Jung-Hyeok;Kim, Han-Ki
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2007.06a
    • /
    • pp.379-380
    • /
    • 2007
  • The characteristics of a co-sputtered indium zinc tin oxide (IZTO) films prepared by dual target dc magnetron sputtering from IZO and ITO targets at a room temperature are investigated. Film properties, such as sheet resistance, optical transmittance, surface work function and surface roughness were examined as a function of ITO dc power at constant IZO dc power of 100 W. It was shown that the increase of the ITO dc power during co-sputtering of ITO and IZO target resulted in an increase of sheet resistance of the IZTO films. This can be attributed to high resistivity of ITO film prepared at room temperature. Surface smoothness and roughness were investigated by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The synchrotron x-ray scattering results obtained from IZTO film with different ITO contents showed that introduction of ITO atoms into amorphous IZO film resulted in a crystallization of IZTO film with (222) preferred orientation due to low alc transition temperature of ITO film. However, the transmittance of the IZTO films with thickness of 150 nm is between 80 and 85 % at wavelength of 550 nm regardless of ITO content. Possible mechanism to explain the ITO and IZO co-sputtering effect on properties of IZTO is suggested.

  • PDF

Case Study on the Tunnel Collapse at the Shallow Depth (NATM터널 저토피 구간에서의 막장붕락 사례연구)

  • Baek Ki-Hyun;Roh Jong-Ryun;Kim Yong-Il;Cho Sang-Kook;Hwang Nag-Youn
    • Tunnel and Underground Space
    • /
    • v.15 no.2 s.55
    • /
    • pp.102-110
    • /
    • 2005
  • ○ ○ tunnel that is located at Iksan - Jangsu freeway ○ ○, has collapsed during construction at the valley with shallow depth. Although, the site investigations, such as TSP, drilling exploration and so of indicated the presence of discontinuities in this section. The RMR was upgraded and the construction were carried out because that not only actual rock qualities were relatively good during construction but also the tunnel foe was stabilized. However, the tunnel was collapsed at the same time blasting of full face, and surface and underground water was infiltrated due to the settlement of the upper part of the tunnel face. To restore the collapsed section, 3-d tunnel stability analysis was performed and suitable reinforcement methods were chosen. The cavity of the upper tunnel face was stabilized by means of UAM and ALC injection. And the settlement was restored using L.W grouting method.

The Information Distortion, Overstock and Stock-out Caused by the Budgetary Process in the Logistic Support (군수지원체계에서 예산과정에 의해 발생하는 정보왜곡과 초과재고 및 재고부족 분석)

  • Lim, Junoh;Park, Chong Goo
    • Journal of the Korea Society for Simulation
    • /
    • v.25 no.4
    • /
    • pp.65-75
    • /
    • 2016
  • Unused spare parts of military equipments which have been kept in the warehouse for a long term have been recognized as wasting of defense budget which also decreased people's confidence in the field of national defence. It is known that overstock is caused by information distortion and bullwhip effect from downstream to upstream in the logistic support as is like business cases. After upgrading the logistic information system, it is possible for Army Logistics Command(ALC) to know demand information of end-user which is the key factor to reduce bullwhip effect. However, inventory is still overstocked and stock-out at the same time. Previous studies have not accounted for these phenomenons and have mainly focused on forecasting inventory level instead of budgetary process(budget period, PROLT, ASL/N-ASL). Thus, this study focuses on the information distortion, overstock and stock-out which caused by budgetary process in the logistic support with system dynamics and simulation.

Involvement of a Novel Organic Cation Transporter in Paeonol Transport Across the Blood-Brain Barrier

  • Gyawali, Asmita;Krol, Sokhoeurn;Kang, Young-Sook
    • Biomolecules & Therapeutics
    • /
    • v.27 no.3
    • /
    • pp.290-301
    • /
    • 2019
  • Paeonol has neuroprotective function, which could be useful for improving central nervous system disorder. The purpose of this study was to characterize the functional mechanism involved in brain transport of paeonol through blood-brain barrier (BBB). Brain transport of paeonol was characterized by internal carotid artery perfusion (ICAP), carotid artery single injection technique (brain uptake index, BUI) and intravenous (IV) injection technique in vivo. The transport mechanism of paeonol was examined using conditionally immortalized rat brain capillary endothelial cell line (TR-BBB) as an in vitro model of BBB. Brain volume of distribution (VD) of [$^3H$]paeonol in rat brain was about 6-fold higher than that of [$^{14}C$]sucrose, the vascular space marker of BBB. The uptake of [$^3H$]paeonol was concentration-dependent. Brain volume of distribution of paeonol and BUI as in vivo and inhibition of analog as in vitro studies presented significant reduction effect in the presence of unlabeled lipophilic compounds such as paeonol, imperatorin, diphenhydramine, pyrilamine, tramadol and ALC during the uptake of [$^3H$]paeonol. In addition, the uptake significantly decreased and increased at the acidic and alkaline pH in both extracellular and intracellular study, respectively. In the presence of metabolic inhibitor, the uptake reduced significantly but not affected by sodium free or membrane potential disruption. Similarly, paeonol uptake was not affected on OCTN2 or rPMAT siRNA transfection BBB cells. Interestingly. Paeonol is actively transported from the blood to brain across the BBB by a carrier mediated transporter system.

Properties of CLC using Silica to Suppress Cracking due to Drying Shrinkage (건조수축에 따른 균열 억제를 위한 규사 혼입 CLC의 특성)

  • Lee, Chang-Woo;Lee, Sang-Soo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2021.11a
    • /
    • pp.125-126
    • /
    • 2021
  • In order to improve the housing culture, construction changes for the utilization of diverse and multifunctional spaces are appearing in response to the increasing diverse needs of consumers. Cellular Light-weight Concrete (CLC) is being developed for use in fire-resistant heat-insulating walls and non-bearing walls. However, manufacturing non-uniformity has become a problem as a drawback due to the use of foamed bubbles and normal temperature curing, and additional research is required. Therefore, in order to suppress cracks due to drying shrinkage, silica sand is mixed with CLC to try to understand its characteristics. In the experiment, the compressive strength from 7 to 28 days of age was measured via a constant temperature and humidity chamber, and the drying shrinkage was analyzed according to each condition using a strain gauge. The compressive strength of matrix tends to decrease as the substitution rate of silica sand increases. This is judged by the result derived from the fact that the specific surface area of silica sand is smaller than that of slag. Based on KS F 2701 (ALC block), the compressive strength of 0.6 products is 4.9 MPa or more as a guide, so the maximum replacement rate of silica sand that satisfies this can be seen at 60%. Looking at the change in drying shrinkage for just 7 days, the shrinkage due to temperature change and drying is 0.7 mm, and the possibility of cracking due to shrinkage can be seen, and it seems that continuous improvement and supplementation are needed in the future.

  • PDF

Studies on the Mechanism of the Ameliorative Activities on Hyperglycemia and Dyslipidemia of Red Ginseng Herbal Acupuncture in C57BL/KsJ db/db Mice (홍삼약침(藥鍼)이 제2형 당뇨병 동물모델의 항고혈당(抗高血糖)및 항고지질(抗高脂質) 기전(機轉)에 미치는 영향(影響))

  • Kim, Jong-Deok;Kim, Jong-In;Koh, Hyung-Kyun;Lee, Yun-Ho;Kang, Sung-Keel
    • Journal of Acupuncture Research
    • /
    • v.25 no.2
    • /
    • pp.11-26
    • /
    • 2008
  • 목적 : 홍삼약침(藥鍼)이 고혈당 및 지질대사장애에 미치는 개선효과와 그 기전을 조사하고자 한다. 방법 : 홍삼약침(藥鍼)의 anti-diabetic 활성과 그 기전을 C57BL/KsJ db/db mice를 이용하여 관찰하였다. 실험 동물은 대조군(DC), 홍삼약침(藥鍼)군(RGL, RGH) 및 양성대조군(MET, GPZ, PIO)의 6군으로 나누었다. 홍삼약침(藥鍼)군은 $0.2m{\ell}$의 홍삼약침멸(藥鍼滅)을 각각 100mg/kg(RGL) 및 200mg/kg(RGH)씩 인체의 간유(肝兪)($BL_{18}$)에 상응하는 혈위에 1일 1회 10주간 좌우 혈을 번갈아가며 약침 시술하였다. 양성대조군은 metformin 300mg/kg(MET), glipizide 15mg/kg(GPZ) 및 pioglitazone 30mg/kg(PIO)을 각각 1일 1회 10주간 경구투여 하였다. 체중과 혈당은 매주 측정하였다. 실험 10주 후에는 혈액채취로 혈중 glucose, 당화혈색소(HbAlc), insulin, 중성지방(TG), adiponectin, leptin, non-esterified fatty acid(NEFA)를 측정 하였고, 간 조직을 채취하여 조직학적 검사 및 gene expression 분석을 시행하였다. 결과 : 홍삼약침(藥鍼)(RGL, RGH)은 10주 동안 C57BL/KsJ db/db mice의 체중을 증가시키는 부작용은 나타나지 않았다. 홍삼약침(藥鍼)군(RGL, RGH)의 사료섭취량은 대조군과 비슷하였으나 음수량은 증가하였다. 홍삼약침(藥鍼)(RGL, RGH)은 대조군에 비하여 각각 19.8% 및 18.3% 혈당을 낮추었고, 홍삼약침(藥鍼)(RGL)은 insulin resistance를 27.7% 감소시켰으며, 경구내당능 검사의 혈중 glucose에서는 대조군에 비해 홍삼약침(藥鍼)군(RGL, RGH)과 양성대조군(MET, GPZ, PIO)에서 각각 19.8%, 18.3%, 67.7%, 52.3% 및 56.9% 감소시켰다. 당화혈색소(HbAlc)는 홍삼약침(藥鍼)(RGL, RGH), MET, GPZ 및 PIO군에서 대조군에 비하여 각각 11.0%, 6.4%, 18.9%, 16.1% 및 27.9% 감소시켰으며, 혈중 glucose감소와 유사한 경향을 나타내었다. 홍삼약침(藥鍼)(RGL)은 대조군에 비해 TG와 NEFA를 각각 18.8% 및 16.8% 감소시켰고, adiponectin과 leptin을 각각 20.6% 및 12.1% 증가시켰다. 홍삼약침(藥鍼)(RGL, RGH)은 중성지방의 침착으로 인한 간의 질량비 증가를 억제하지 못하였으나, 지방구를 감소시겼음을 관찰할 수 있었다. Microarray 분석에서는 홍삼약침(藥鍼)(RGL, RGH)이 간에서 glycolysis, gluconeogenesis 및 fatty acid beta-oxidation과 관련된 유전자 발현에 영향을 미치는 것으로 나타나 양성대조군 metformin과 유사한 기전을 나타내었다. 요약 : 홍삼약침(藥鍼)은 T2DM동물모델(C57BL/KsJ db/db mice)에서 항당뇨 및 지질대사 개선활성이 있었다. 홍삼약침(藥鍼)은 C57BL/KsJ db/db mice의 간조직에서 lipogenesis억제 및 fatty acid beta-oxidation활성을 통해 혈당 이용을 높이고, insulin sensitivity를 향상시켰다. 또한 유전자 발현분석을 통해 그 기전이 metformin과 유사함을 확인할 수 있었으므로 향후 홍삼약침(藥鍼)의 새로운 약침 기술 개발 근거가 될 수 있을 것으로 사료된다.

  • PDF

A development of DS/CDMA MODEM architecture and its implementation (DS/CDMA 모뎀 구조와 ASIC Chip Set 개발)

  • 김제우;박종현;김석중;심복태;이홍직
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.22 no.6
    • /
    • pp.1210-1230
    • /
    • 1997
  • In this paper, we suggest an architecture of DS/CDMA tranceiver composed of one pilot channel used as reference and multiple traffic channels. The pilot channel-an unmodulated PN code-is used as the reference signal for synchronization of PN code and data demondulation. The coherent demodulation architecture is also exploited for the reverse link as well as for the forward link. Here are the characteristics of the suggested DS/CDMA system. First, we suggest an interlaced quadrature spreading(IQS) method. In this method, the PN coe for I-phase 1st channel is used for Q-phase 2nd channels and the PN code for Q-phase 1st channel is used for I-phase 2nd channel, and so on-which is quite different from the eisting spreading schemes of DS/CDMA systems, such as IS-95 digital CDMA cellular or W-CDMA for PCS. By doing IQS spreading, we can drastically reduce the zero crossing rate of the RF signals. Second, we introduce an adaptive threshold setting for the synchronization of PN code, an initial acquistion method that uses a single PN code generator and reduces the acquistion time by a half compared the existing ones, and exploit the state machines to reduce the reacquistion time Third, various kinds of functions, such as automatic frequency control(AFC), automatic level control(ALC), bit-error-rate(BER) estimator, and spectral shaping for reducing the adjacent channel interference, are introduced to improve the system performance. Fourth, we designed and implemented the DS/CDMA MODEM to be used for variable transmission rate applications-from 16Kbps to 1.024Mbps. We developed and confirmed the DS/CDMA MODEM architecture through mathematical analysis and various kind of simulations. The ASIC design was done using VHDL coding and synthesis. To cope with several different kinds of applications, we developed transmitter and receiver ASICs separately. While a single transmitter or receiver ASC contains three channels (one for the pilot and the others for the traffic channels), by combining several transmitter ASICs, we can expand the number of channels up to 64. The ASICs are now under use for implementing a line-of-sight (LOS) radio equipment.

  • PDF

A Clinical Study of Pulmonary Tuberculosis in Diabetics (당뇨병에 동반된 폐결핵의 임상적 연구)

  • Jeong, In-Kyung;Yoo, Jee-Hong;Lee, Seon-Mee;Koh, Kwan-Pyo;Han, Min-Soo;Kang, Hong-Mo
    • Tuberculosis and Respiratory Diseases
    • /
    • v.45 no.4
    • /
    • pp.705-713
    • /
    • 1998
  • Background: An association between diabetes and tuberculosis has long been implied. The severity of diabetes appears to correlate with the degree of tuberculous activity. Methods: A retrospective chart review of 82 patients with active pulmonary tuberculosis in diabetics (DMTB) and 83 patients with active pulmonary tuberculosis in nondiabetics (Non-DMTB) admitted to the Kyung Hee Medical Center between January 1995 and December 1996 was underiaken. Results: The sex ratio of DMTB was 58 : 24, and that of Non-DMTB was 62 : 21. Male patients predominated in both groups. The highest incidence of DMTB was 6th and 7th decades and that of Non-DMTB was 3rd and 4th decades. In case which the tuberculosis developed after diagnosis of diabetes, the prevalence of pulmonary tuberculosis was the highest in diabetes for 5-10 years. On chest X-ray findings, the moderate advanced tuberculosis cases were the most common (60.9% in DMTTB and 50.6% in Non-DMTB). There was no relation between the degree of tuberculosis activity on chest x-ray(minimal, moderate, and far advanced tuberculosis) and presence of diabetes. The incidence of lower lung field tuberculosis in DMTB was significantly higher than Non-DMTB(p<0.05). The multiple lobe involvement was the predominant chest roentgenographic finding in both groups. There was no significant difference of treatment response between DMTB and Non-DMTB. There was no relationship between initial HbA1c and the severity of pulmonary tuberculosis on chest X-ray. During treatment of pulmonary tuberculosis in excellently and well controlled diabetes, the cure rate of pulmonary tuberculosis was significantly higher than the poorly controlled diabetes and the rate of treatment failure was significantly lower than poorly controlled diabetes. (p<0.05). Conclusion: Poor control of blood glucose is related with increased rate of treatment failure in pulmonary tuberculosis with diabetes mellitus. Further investigation will be needed to study the mechanisms of treatment failure in poorly controlled diabetics with pulmonary tuberculosis.

  • PDF

Mechanical Degradation of Polystyrene by Mastication (II). Basic Studies on Recovery of Waste Polystyrene (Mastication에 依한 Polystyrene의 機械的 分裂 (第2報). 廢 Polystyrene 樹脂의 再生利用에 關한 基礎的 硏究)

  • Ki-Hyun Chung;Kook Joong Kim;Sang Dae Kim
    • Journal of the Korean Chemical Society
    • /
    • v.19 no.5
    • /
    • pp.386-393
    • /
    • 1975
  • Polystyrene and polystyrene blended with SBR were subjected to the mechanical degradation by roll mastication. The results obtained are as follows. 1. For the polystyrene which is blended with SBR, the overall shape of the molecular weight distribution curve moves from the higher molecular weight portion to the lower molecular weight portion, becomes narrower in breadth, and its peak becomes higher as the degradation proceeds. The final molecular weight distribution exhibits a relative uniformity. This is due to the fact that only the polymer molecules with the high molecular weight consisted in original polystyrene are degraded mechanically and produced the polymer molecules with the low molecular weight. 2. The scission number of polystyrene chains increases with mastication time, and the number of degraded polymer chains produced when the polymer is masticated for 100 minutes at 140, 150 and $160^{\circ}C$ are $2.36{\times}10^{20},\;1.76{\times}10^{20}\;and\;1.52{\times}10^{20}$, respectively. 3. The rate of the degradation of polystyrene decreases with the mastication temperature. The activation energy is found to have the negative value, -8.7 kcal/mole. Therefore it is indicated that the mechanical degradation is a chemical process of which the activation energy is supplied mechanically.

  • PDF

Effect of ODAM and BMPRIB on Enamel Mineralization (ODAM과 BMPRIB가 법랑질의 석회화에 미치는 영향)

  • Park, Jong-Tae;Cho, Kwang-Hee;Bae, Hyun-Sook;Cho, Young-Sik;Kim, Heung-Joong
    • Journal of dental hygiene science
    • /
    • v.11 no.1
    • /
    • pp.55-61
    • /
    • 2011
  • The purpose of this study was to investigate the biological function of ODAM and its signal transduction pathway in the steps of ameloblast differentiation and enamel mineralization. An ODAM recombinant protein was produced and stable ODAM transgenic cell lines were also established using ameloblast-lineage cells (ALCs). To verify the ODAM signal transduction pathway, BAMBI recombinant protein, an inhibitor of BMP2 and BMP receptor 1B (BMPR-1B), was treated and BMPR-1B siRNA was used to silence expression of BMPR-1B. Mineralization was augmented by the ALCs treated with the ODAM recombinant protein and the sense ODAM overexpressing cells. The ALP activity was also increased markedly in the sense ODAM overexpressing cells and the ALCs treated with ODAM recombinant protein. The inactivation of ODAM in the ALCs down-regulated the expression of BMPR-1B, whereas its expression was up-regulated markedly when ODAM was overexpressed. These results provide deeper insights into the process of ameloblast maturation and in enamel mineralization. It also suggested that ODAM augmented enamel mineralization.