• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.2
• /
• pp.129-136
• /
• 2011

Microorganisms are the main causative factors of pulpal and periapical diseases, therefore successful endodontic treatment is depend on the effective elimination of intracanal bacterial populations. Many studies have been reported antimicrobial effect of Allyl isothiocyanate (AIT) which the principle ingredient of Horseradish (Armoracia rusticana) root extracts. The purposes of this study are to evaluate the antimicrobial effectiveness of Horseradish root extracts against Enterococcus faecalis in root canals of extracted human teeth and compare to sodium hypochlorite (NaOCl). Extracted human mandibular premolar root canals were infected with E. faecalis for 21 days, and then irrigated with Horseradish root extracts, NaOCl solution and saline. After canal irrigation, first samples (S1) were taken. After first sampling, the canals were additionally incubated 7 days, and then second samples (S2) were taken. The samples were inoculated on EHI agar plate to determine the colony forming units (CFU). 1. Mean values of CFU in S1 were $5.815{\times}10^3$ CFU/ml at Horseradish groups, and $3.465{\times}10^3$ CFU/ml at NaOCI groups. There was no statistically significant differences (p=0.086). 2. Mean values of CFU in S2 were $3.100{\times}10^3$ CFU/ml at Horseradish groups, and $5.252{\times}10^5$ CFU/ml at NaOCI groups. There was statistically significant difference (p<.05). 3. There was no statistically significant differences (p=0.076) between S1 and S2 at Horseradish groups in the mean values of CFU. However, there was statistically significant differences (p<.05) between S1 and S2 at NaOCI groups in the mean values of CFU.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.168-178
• /
• 2010

Objective : The aim of this study was to determine the antimicrobical effect of horseradish root extracts against Enterococcus faecalis and Fusobacterium nucleatum isolated from oral cavity compared with reference strain, and compared with that of chlorhexidine. Method : Horseradish root extracts and chlorhexidine were sequentially diluted and tested against anaerobes(E. faecalis, F. nucleatum) isolated from children's oral cavity. The microbes were anaerobically incubated and the minimum inhibitory concentration(MIC) and minimum bactericidal concentration(MBC) were detected. Results :1. Horseradish root extracts showed antimicrobial effect against E. faecalis isolated strain at same or slightly higher concentration compared with MIC of reference strain. 2. $625.0\sim1,250.0{\mu}g/ml$ horseradish root extracts showed similar antimicrobial effect with chlorhexidine($7.8\sim15.6{\mu}g/ml$). 3. Horseradish root extracts showed antimicrobial effect against F. nucleatum isolated strain at same or slightly higher concentration compared with MIC of reference strain. 4. $78.1\sim312.5{\mu}g/ml$ horseradish root extracts showed similar antimicrobial effect with chlorhexidine($7.8\sim15.6{\mu}g/ml$). Conclusions : The results of this study confirm that horseradish root extracts has antimicrobial effect against anaerobes isolated from oral cavity as well as reference strain. And we found the potential of horseradish root extracts as a canal irrigant or disinfectant.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1342-1346
• /
• 2009

This study was conducted to investigate the effect of Pepino extract on alcohol metabolism in male Sprague-Dawley rats. When the rats were given Pepino extract 30 min before 60% alcohol (4 g/kg B.W) administration, alcohol concentration in blood was significantly reduced, but acetaldehyde concentration was not significantly different, compared with the control group after 3 hrs of alcohol administration. When the rats were given Pepino extract ($1^{\circ},\;5^{\circ},\;10^{\circ},\;&\;15^{\circ}$ Brix) 30 min before 60% alcohol administration, alcohol concentration in blood with $1^{\circ}$ Brix Pepino extract was 44% after 3 hrs of alcohol administration, compared with the control group. When the rats were given with $1^{\circ}$ Brix Pepino extract at 30 min before 60% alcohol administration, alcohol concentration in blood was significantly reduced after one hour and acetaldehyde concentration was reduced by 19% after 5 hrs of alcohol administration, compared with the control group. Glutamate-oxaloacetate transaminase and glutamate-pyruvate transaminase activities were not significantly different in all experimental groups, compared with the control group. These results suggest that Pepino extract can be effective in alcohol metabolism in the alcohol-treated rats.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.213-217
• /
• 2013

The GaN layer was typical III-V nitride semiconductor and was grown on the sapphire substrate which cheap and convenient. However, sapphire substrate is non-conductivity, low thermal conductivity and has large lattice mismatch with the GaN layer. In this paper, the poly GaN epilayer was grown by HVPE on the metallic compound graphite substrate with good heat dissipation, high thermal and electrical conductivity. We tried to observe the growth mechanism of the GaN epilayer grown on the amorphous metallic compound graphite substrate. The HCl and $NH_3$ gas were flowed to grow the GaN epilayer. The temperature of source zone and growth zone in the HVPE system was set at $850^{\circ}C$ and $1090^{\circ}C$, respectively. The GaN epilayer grown on the metallic compound graphite substrate was observed by SEM, EDS, XRD measurement.

• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.49-58
• /
• 1994

To investigate the relationship between leaf growth of several woody plants and ait tempera ture in early growing season (from April to June) in deciduous forests, I surveyed the changes of leaf area (LA), leaf weight (LW) and specific leaf area (SLA) of 19 specles, in two areas Namhansansung (NA) and Taegwallyong (TA) area in which that the latitudes are similer ($37^{\circ}28'N$ at NA and $37^{\circ}27'N$ an TA), but annual mean-temperatures were different ($11.8^{\circ}C\;in\;NA, \;6.3^{\circ}C$ in TA) for two years, 1991 and 1992. In the same species, the plants of NA began to grow 10-25 days earlier than those of TA, but the latter grew faster than the former. On 10 June the values of LA and LW per leaf were similar in the two areas but the maximum values of SLA were higher in NA. In the same plant, the values of LA and LW were constant year by year, except for PYIOLUS leveilleana, Quercus mongolica, Symplocos chznensis for. pilosa and S t y a r ubussiu. In N A , the leaves be gan to grow during the first ten days of April, and eariler in 1992 than in 1991, and daily mean temperature (DMT) of the former from 27 March to 6 April were higher than those of thc latter. But the LA increased faster in 1991 than in 1992. and DMT from 10 April to 16 April were higher in 1991 than in 1992.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.198-206
• /
• 1995

The objective of this study was to determine the rate of nitrogen mineralization at clearcut and uncut in oak(Quercus rubra L.) and pine(Pinus resinosa Ait.) stands. The study sites were located in northern Lower Michigan, U.S.A. Nitrogen mineralization rates in the top 15cm of mineral soil were examined during the 1991 and 1992 growing seasons(May-October) using an in situ buried tag technique. diet nitrogen mineralization in oak stands over the course of both growing seasons was 67kg/ha in the clearcut and 30kg/ha in the uncut stands. In contrast, net nitrogen mineralization in pine stands was 27kg/ha and 13kg/ha for the same treatments. Total net nitrogen mineralization rates were always higher in oak stands than in pine stands. Extractable $NO_3^-$ before and after one month soil incubation in both oak and pine stands was generally not detectable in the uncut stands, but in the pine clearcut treatment(nitrification over the course of both growing seasons : 3.3kg/ha). The results indicated that : 1) substantial increases in the amount of available soil nitrogen occurred following clearcuts in both stands : and 2) the loin rates of nitrification may be an important mechanism for retention of nitrogen in both oak and pine stands.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.62-67
• /
• 2015

The carbon microspheres of a core-shell type were grown by the method of mixed-source hydride vapor phase epitaxy (HVPE). The surface and the cross section of the carbon microsphere grown by a new method were observed by scanning electron microscope (SEM). The characteristics of the carbon microsphere were investigated by X-ray photoelectron spectroscopy (XPS) and a high resolution-transmission electron microscope (HR-TEM). From these measurements, the diameters of carbon sphere were about few hundred micrometers. Furthermore, we show that the carbon microsphere of the core-shell type by mixed-source HVPE method can be grown successfully with the larger size than those of the existing one. This mixed-source HVPE method is proposed a new method for making of carbon microsphere.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.45-50
• /
• 2015

Compositionally graded AlGaN epilayer was grown by HVPE (hydride vapor phase epitaxy) on (0001) c-plane sapphire substrate. During the growth of graded AlGaN epilayer, the temperatures of source and the growth zone were set at $950^{\circ}C$ and $1145^{\circ}C$, respectively. The growth rate of graded AlGaN epilayer was about 100 nm/hour. The changing of Al contentes was investigated by field emission scanning electron microscope (FE-SEM) and energy dispersive spectroscopy (EDS). From the result of atomic force microscope (AFM), the average of roughness in 2 inch substrate of graded AlGaN epilayer was a few nanometers scale. X-ray diffraction (XRD) with the result that the AlGaN (002) peak ($Al_{0.74}Ga_{0.26}N$) and AlN (002) peak were appeared. It seems that the graded AlGaN epilayer was successfully grown by the HVPE method. From these results, we expect to use of the graded AlGaN epilayer grown by HVPE for the application of electron and optical devices.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.56-64
• /
• 2008

Although the EGSE (Electrical Ground Support Equipment) and MCS (Mission Control System) have many similar or even identical functions, the EGSE used for assembly, integration and validation phase and the MCS for the mission operations phase are normally developed separately and used by different groups of engineers. However, the common ground system for EGSE and MCS has developed and many space missions such as PROBA (PRoject for On-Board Autonomy), ROSETTA, MARS EXPRESS, CRYOSAT (Cryosphere Satellite), GOCE (Gravity field and steady state Ocean Circulation Explorer), and GALILEO have used or will use it to minimize risk, reduce cost and improve overall product quality. It is based on ECSS (European Cooperation for Space Standards) E70 which is the international standard for ground systems and operations published by ECSS E70 Working Group. The ECSS E70 contains the basic rules, principles and requirements applied to the engineering of the ground systems and the execution of mission operations. This paper introduces standardization policy, organization and standard documentation in ECSS. The overview of ECSS E70 such as status, purpose and contents is also described in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.553-558
• /
• 2011

This paper describes the development and test result of S-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels, S-band for Telemetry & Command and X-band for mission data. S-band Transmitter(STX) functionally made of modulator, frequency synthesizer, power amp and DC/DC converter. The transmission data is modulated by FSK(Frequency Shift Keying) and the interface between spacecraft sub-module and STX is RS-422 standard method. The FM STX is based on modular design. The RF output power of STX is 1.5W(31.7dBm) and BER of STX is under $1{\times}10^{-5}$ which meets the specification respectively. The FM STX is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.