• Journal of Plant Biotechnology
• /
• v.34 no.2
• /
• pp.139-144
• /
• 2007

Hypocotyl explants of Chinese cabbage (cvs. "Jeong Sang") produced transgenic calli on callus induction medium (MS salt, B5 vitamin, 5 mg/L acetosyringone, 1 mg/L 2,4-D, 3% sucrose, 400 mg/L cefotaxime, 100 mg/L paromomycin, pH 5.8) after cocultivation with strains of Agrobacterium tumefaciens (EHA101, LBA4404, GV3101) harboring the pPTN290 containing paromomycin-resistance gene as a selectable marker, and then they transferred to root induction medium (1/2MS salt, MS vitamins, 2% sucrose, 100 mg/L paromomycin, 100 mg/L cefotaxime, pH 5.8) and shoot induction medium (MS salt, B5 vitamin, 4 mg/L $AgNO_3$, 4 mg/L 6-benzyladenine, 3 mg/L alpha-naphthaleneacetic acid, 100 mg/L paromomycin, 100 mg/L cefotaxime, 3% sucrose, pH 5.8) in order. There was a significant difference in the frequency of transgenic calli depending on Agrobacterium strains. In particular, the highest frequency (6.1%) of transgenic calli was obtained from the hypocotyls cocultivated with EHA101 strains. Also, the frequency (%) of transgenic root and plants from each transgenic callus clone were obtained with 60.7% and 38.2% in EHA101, with 8.3% and 0% in LBA4404, with 20.5% and 85.7% in GV3101 strains, respectively. They were grown to maturity in a greenhouse and normally produced $T_2$ seeds. GUS histochemical assay for progeny ($T_2$) revealed that the transgenes was expressed in the plant genome, and progeny analysis from 7 independent transgenic events demonstrated that the transformants transmitted the transgene as a single or multiple functional locus.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.299-299
• /
• 2009

유기농업에서 유기자원을 이용하여 적정량의 양분을 공급하기 위해서는 먼저 유기자원의 무기화특성을 고려하여야 한다. 토성, 기온, 재배형태 등 다양한 요인을 고려하면서 무기화모델을 이용하여 유기농업에서 많이 사용되고 있는 유기질비료와 작물잔사 등을 대상으로 잠재 무기화가능 질소량(PMN, Potentially mineralizabe nitrogen)을 추정하였다. 실험은 실내에서 항온 배양하여 유기자원별 질소 무기화 양상을 분석함으로서 대상 유기자원의 PMN 및 무기화 속도를 도출하였다. 실험재료는 팜박, 피마자박, 팽화왕겨, 토마토, 수박, 감자, 마늘 등 7종을 대상으로 $20^{\circ}C,\;25^{\circ}C,\;30^{\circ}C$ 조건에서 하였으며, 최대수분보유량의 60% 수준으로 하여 사양토 및 식양토 조건에서 실험하였다. 유기자원은 토양 100g에 질소 30kg/10a 해당량을 시용하여 112일까지 항온하였다. 토성별 무기화량은 식양토 보다 사양토에서 다소 높은 경향을 보였다. 또한 항온온도가 높을수록 무기화량이 증가하였다. 유기자원별로는 피마자박에서 높았고, 팽화왕겨는 낮은 경향이었다. 유기자원이 처리된 것에서 토양 자체의 무기화량을 뺀 순무기화량은 피마자박, 토마토잔사, 감자잔사가 항온초기부터 무기화가 진행되었으며, 수박잔사, 마늘잔사는 항온 초기에 음의 값을 가지는 유기화 과정을 거친 후 항온 60일에서 80일 사이에서 무기화가 진행되었고 팽화왕겨의 경우 항온 11일까지 유기화가 계속되었다. PMN 및 무기화속도를 추정하기 위하여 반응속도식을 이용하였으며, 모델의 적합도를 높이기 위하여 이중지수모형을 이용하여 매개변수를 결정하고 무기화경향을 예측한 결과 PMN은 피마자박>마늘잔사=팜박>수박잔사=토마토잔사>감자잔사의 순이었다. 또한 유기자원의 무기화량과 C/N율과는 부의 상관관계($r^2$=0.8653)를 나타내었다. 요소의 PMN(135.6mg/kg)에 대한 유기자원별 PMN의 상대적 비율은 피마자박이 100%, 팜박과 마늘잔사가 81%, 토마토, 수박 및 감자잔사가 28~65% 수준이었다.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.25-31
• /
• 1969

The characteristics of crude enzyme produced from Trichoderma viride($O_2-1$) which isolated from half spoiled Locust acacia wood (Robinia Pseudacacia Linne) were examined in this paper. The results obtained were summarized as follows: 1) As a results of enzymatic action on several cellulose substrate it was found that there were some sorts of cellulase in crude enzyme. 2) The activity of C.M.C. ase and ${\beta}-glucosidase$ were decreased in accordance with increasing concentration of substrate, and filter paper saccharifying enzyme relatively increased in accordance with increasing concentration of substrate and enzyme in couse of time. 3) The optimal pH of each enzyme was 5.0 and the range of stability on pH generally from 3 to 6. 4) In disintegrating activity on filter paper, in decomposing activity on C.M.C. and $p-nitrophenyl-{\beta}-D-glucoside$, and in saccharifying activity on filter paper, the optimal temperatures were $50^{\circ}C.,\;60^{\circ}C,\;and\;65^{\circ}C$. 5) The order of stability on temperature was as follow; saccharifying activity on filter paper decomposing activity on C.M.C. disintegrating activity on filter paper>decomposing activity on $p-nitrophenyl-{\beta}-D-glucoside$. 6) The activity of the enzymes was inhibited with mercuric and silver ion, and activated with potassium.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.45-54
• /
• 2000

The effect of electropolishing far stamped leadframe on the removal of the edge burr and residual stress relief was examined. The present study showed that the electropolishing could be used for enhanced surface quality of stamped leadframes. The electropolishing was performed at the condition of 60% phosphoric acid electrolyte, 5 ampere of current and 3 cm electrode gap at $70^{\circ}C$ for 2 minutes for Alloy42 type leadframe, and $50^{\circ}C$ for 1.5 minutes for C-194 type leadframe. The FWHM values from X-ray diffraction showed that residual stress of electropolished leadframe recovered to the level of as-received raw materials and surface roughness measured by using AFM tuned out to be improved by 0.079 $\mu\textrm{m}$ and 0.014 $\mu\textrm{m}$ ($R_{rms}$) far alloy 42 and C-194 type leadframes, respectively. The plated thickness using XRF showed the improved uniformity in thickness variation by 0.4~0.5 $\mu\textrm{m}$ and grain growth, which is favorable for interface adhesion, was also observed from the bake test samples. We could certify dimensional stability of leadframe with inspection by means of 3D-topography and hardness measurements.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.115-124
• /
• 2007

Electrum-sulfide mineralization of the Youngbogari mine area occurred in two stages of massive quartz veins that fill the fractures along the fault/shear zones in the Precambrian gneiss. Ore mineralogy is simple, consisting of arsenopyrite $(31.4{\sim}33.4atom.%As)$, pyrite, sphalerite $(4.1{\sim}17.6mole%FeS)$, galena, chalcopyrite, argentite, and electrum. Electrum $(60.3{\sim}87.6atom.%Ag)$ is associated with galena, chalcopyrite and late sphalerite infilling the fractures in quartz and sulfides. Fluid inclusion data show that ore mineralization was formed from $H_2O-CO_2-CH_4-NaCl$ fluids $(X_{CO2+CH4}=0.0\;to\;0.2)$ with low salinities (0 to 10wt.% eq. NaCl) at temperatures between $200^{\circ}\;and\;370^{\circ}C$. Gold-silver mineralization occurred later than the base-metal sulfide deposition, at temperatures near $250^{\circ}C$ and was probably a result of cooling and decreasing sulfur fugacity caused by sulfide precipitation and/or $H_2S$ loss through fluid unmixing.

• Applied Biological Chemistry
• /
• v.47 no.2
• /
• pp.202-207
• /
• 2004

This study was performed to investigate the inhibitory effect of the water-extract from fermented compositions containing Inonotus obliquus with added Houttuynia cordata on the growth of either human AGS gastric and HCT-15 colon cancer cells or NIH3T3 normal mouse fibroblast cells. Cytotoxic activity on cancer cells was investigated by viable cell count, MTT assay and morphological observation. Mixtures of Inonotus obliquus with added Houttuynia cordata were fermented at $30{\sim}37^{\circ}C$, $50{\sim}60%$ humidity for 30 days, extracted with water, freeze dried, powered, and then dissolved in water for the experiment. In MTT assay, the fermented compositions exhibited inhibitory effects of 13, 25, 40, 67 and 78% for AGS and 22, 40, 50, 69 and 76% for HCT-15 at 0.16, 0.4, 0.8, 1.6 and 4.0 mg/ml, respectively. However, normal NIH3T3 cells were exhibited 86% survival under the same experimental condition. Fermented compositions showed highly inhibitory effect against human cancer cell line HCT-15 and AGS, but not on normal cell line NIH3T3.

• Journal of Institute of Convergence Technology
• /
• v.8 no.1
• /
• pp.33-39
• /
• 2018

The screen printing method for forming the electrode by applying the existing pressure is difficult to apply to thin wafers, and since expensive Ag paste is used, it is difficult to solve the problem of cost reduction. This can solve both of the problems by forming the front electrode using a plating method applicable to a thin wafer. In this paper, the process conditions of electrode formation are optimized by using LIEP (Light-Induced Electrode Plating). Experiments were conducted by varying the Ni plating bath temperature $40{\sim}70^{\circ}C$, the applied current 5 ~ 15 mA, and the plating process time 5 ~ 20 min. As a result of the experiment, it was confirmed that the optimal condition of the structural characteristics was obtained at the plating bath temperature of $60^{\circ}C$, 15 mA, and the process time of 20 min. The Cu LIEP process conditions, experiments were conducted with Cu plating bath temperature $40{\sim}70^{\circ}C$, applied voltage 5 ~ 15 V, plating process time 2 ~ 15 min. As a result of the experiment, it was confirmed that the optimum conditions were obtained as a result of electrical and structural characteristics at the plating bath temperature of $60^{\circ}C$ and applied current of 15 V and process time of 15 min. In order to form Ni silicide, the firing process time was fixed to 2 min and the temperature was changed to $310^{\circ}C$, $330^{\circ}C$, $350^{\circ}C$, and post contact annealing was performed. As a result, the lowest contact resistance value of $2.76{\Omega}$ was obtained at the firing temperature of $310^{\circ}C$. The contact resistivity of $1.07m{\Omega}cm^2$ can be calculated from the conditionally optimized sample. With the plating method using Ni / Cu, the efficiency of the solar cell can be expected to increase due to the increase of the electric conductivity and the decrease of the resistance component in the production of the solar cell, and the application to the thin wafer can be expected.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.8 no.1
• /
• pp.41-48
• /
• 2005

Purpose: Non-A, B, C viral hepatitis is the name given to the disease with clinical viral hepatitis, but in which serologic evidence of A, B, C hepatitis has not been found. Little is known about the etiology and clinical features of non-A, B, C viral hepatitis in children. Methods: A clinical analysis of 45 cases with non-A, B, C viral hepatitis who were admitted to the Department of Pediatrics, Pusan National University Hospital, from January 2001 to June 2004 was carried out retrospectively. Patients who were positive for HBsAg, anti-HAV and anti-HCV and had toxic, metabolic, autoimmune, or neonatal hepatitis were excluded in this study. Results: Among 45 cases of non-A, B, C viral hepatitis, the etiology was unknown in 26 (57.8%), CMV (cytomegalovirus) in 14 (31.1%), EBV (Epstein Barr virus) in 2 (4.4%), HSV (herpes simplex virus) in 2 (4.4%) and RV (rubella virus) in 1 (2.2%). Twenty seven out of 45 (60.0%) patients were under 1 year of age. Sixteen (33.3%) patients had no specific clinical symptoms and were diagnosed incidentally. On physical examination, twenty seven out of 45 patients (60.0%) had no abnormal findings. Forty three out of 45 patients (95.6%) showed classic clinical course of acute viral hepatitis, whereas fulminant hepatitis developed in two patients. Mean serum ALT (alanine aminotransferase) level was $448.7{\pm}771.9IU/L$. Serum ALT level was normalized in 31 out of 45 patients (81.6%) within 6 months and all patients within 18 months. Aplastic anemia was complicated in a case. Conclusion: Although most patients with non-A, B, C viral hepatitis showed a good prognosis, a careful follow-up would be necessary because some of them had a clinical course of chronic hepatitis, fulminant hepatitis and severe complication such as aplastic anemia.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.1
• /
• pp.51-57
• /
• 2002

The biological activities of immune modulating activities of the extracts from Echinacea purpurea, Chrysanthmum indicum L. and Circium japonicum var. ussuriense KITAMURA were compared. About 70% of the growth of human hepatocarcinoma and 80% of human gastric cancer cell was inhibited in adding 0.5mg/ml of the ethanol extracts of Echinacea purpurea, Chrysanthmum indicum L. and Circium japonicum var. ussuriense KITAMURA, respectively. The growth of human breast cancer cells was also inhibited in adding 0.5mg/ml of the extracts as well as 60% of the human cancer cells. It was proved that the growth of human normal lung cell, scored as 15% for the extracts. Overall selectivity of the extracts on several human cancer cell line was over 3, which is higher than those from the conventional herbs. The growth of both human immune B and T cells was enhanced up to 1.4 to 2.0 times by adding the extracts, compared to the controls. The secretion of tumor necrosis $factor-alpha(TNF-{\alpha})$ from T cell was also increased up to 94 pg/ml in adding the Echinacea purpurea ethanol extract (0.5mg/ml). Circium japonicum var. ethanol extract also increased up to about 96 pg/ml of interleukin-6(IL-6) from B cell.

• Journal of the Korean Geographical Society
• /
• v.41 no.5 s.116
• /
• pp.527-544
• /
• 2006

This study provides a definition of heat waves, which indicate the conditions of strong sultriness in summer, appropriate to Korea and intends to clarify long term(1973-2006) averaged spatial and temporal patterns of annual frequency of heat waves with respect to their intensity. Based on examination of the Korean mortality rate changes due to increase of apparent temperature under hot and humid summer conditions, three consecutive days with at least $32.5^{\circ}C,\;35.5^{\circ}C,\;38.5^{\circ}C,\;and\;41.5^{\circ}C$ of daily maximum Heat Index are defined as the Hot Spell(HS), the Heat Wave(HW), the Strong Heat Wave(SHW), and the Extreme Heat Wave(EHW), respectively. The annual frequency of all categories of heat waves is relatively low in high-elevated regions or on islands adjacent to seas. In contrast, the maximum annual frequency of heat waves during the study period as well as annual average frequency are highest in interior, low-elevated regions along major rivers in South Korea, particularly during the Changma Break period(between late July and mid-August). There is no obvious increasing or decreasing trend in the annual total frequency of all categories of heat waves for the study period However, the maximum annual frequencies of HS days at each weather station were recorded mainly in the 1970s, while most of maximum frequency records of both the HW and the SHW at individual weather stations were observed in the 1990s. It is also revealed that when heat waves occur in South Korea high humidity as well as high temperature contributes to increasing the heat wave intensity by $4.3-9.5^{\circ}C$. These results provide a useful basis to help develop a heat wave warning system appropriate to Korea.