• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2901-2907
• /
• 1996

Flatness of cold rolled strip is vital to the quality of the product and productivity of the mill. Therefore, in recent year requirement for flatness control in strip rolling have become increasingly severe. The necessity for more accurate automatic gauge control and automatic flatness control(AFC) has increased by customer's requirement for cold rolled steel sheets with thinner gauge and better flatness quality. In this paper, the performance and functions of AFC system installed on the 4 hi-reversing mill has been investigated under actual conditions. The test results are as follows : The more strip thickness is thick, the smaller the I-value. The I-value is a strain measured by stressometer. Complex distributions of strip tension are controlled to remove not only a quarter buckle but also a simple center wave and edge wave. The defects caused by poor flatness have been drastically decreased. And a proper coolant temperature for work roll cooling system on the AFC system is about $50~55^{\circ}C$.

• 한국컴퓨터정보학회논문지
• /
• 제10권4호
• /
• pp.345-354
• /
• 2005

본 논문에서는 웹 기반 분산 기업 시스템 사이의 협력을 분석하여 적기 협력의 필요성을 파악하였고 이를 기업 사이의 계약 관점에서 기술하였다. 그리고 이러한 기업 시스템 사이의 적기 협력을 지원할 수 있는 ECA(event condition action) 규칙 기반 방안과 이 방안을 지원하는 능동 기능 컴포넌트(AFC)를 제안한다. 제안된 방안은 고수준의 ECA 규칙 프로그래밍과 사건 기반의 즉시 처리 방식을 지원하므로 시스템 관리자나 프로그래머가 응용 로직과는 별도로 적기 협력을 쉽게 구축하고 유지 보수할 수 있다. 제안하는 능동 기능 컴포넌트는 기업의 방화벽을 통해서도 적용될 수 있도록 HTTP 프로토콜을 사용하였고, 실용성을 위하여 상업용 DBMS의 기본 트리거를 이용하여 구현하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제43권2호
• /
• pp.112-118
• /
• 2016

Objective: Ovarian reserve tests are commonly used to predict ovarian response in infertile patients undergoing ovarian stimulation. Although serum markers such as basal follicle-stimulating hormone (FSH) or random $anti-M{\ddot{u}}llerian$ hormone (AMH) level and ultrasonographic markers (antral follicle count, AFC) are good predictors, no single test has proven to be the best predictor. In this study, we developed appropriate equations and novel nomograms to predict the number of oocytes that will be retrieved using patients' age, serum levels of basal FSH and AMH, and AFC. Methods: We analyzed a database containing clinical and laboratory information of 141 stimulated in vitro fertilization (IVF) cycles performed at a university-based hospital between September 2009 and December 2013. We used generalized linear models for prediction of the number of oocytes. Results: Age, basal serum FSH level, serum AMH level, and AFC were significantly related to the number of oocytes retrieved according to the univariate and multivariate analyses. The equations that predicted the number of oocytes retrieved (log scale) were as follows: model (1) $3.21-0.036{\times}(age)+0.089{\times}(AMH)$, model (2) $3.422-0.03{\times}(age)-0.049{\times}(FSH)+0.08{\times}(AMH)$, model (3) $2.32-0.017{\times}(age)+0.039{\times}(AMH)+0.03{\times}(AFC)$, model (4) $2.584-0.015{\times}(age)-0.035{\times}(FSH)+0.038{\times}(AMH)+0.026{\times}(AFC)$. model 4 showed the best performance. On the basis of these variables, we developed nomograms to predict the number of oocytes that can be retrieved. Conclusion: Our nomograms helped predict the number of oocytes retrieved in stimulated IVF cycles.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.234-238
• /
• 2016

본 연구에서는 용매추출 공정 중 최종 건조 과정에서 회수방식을 달리하여 무회분석탄을 제조한 후 물리적 특성과 화학적 구조를 비교하였다. 무회분석탄 제조에는 아역청탄 등급의 Kideco coal과 극성용매인 N-methyl-2-pyrrolidone(NMP)를 사용하였으며, 회수방식으로는 감압건조, 희석침전, 분무건조 방식을 사용하였다. 제조된 무회분석탄의 물성변화를 확인하기 위해 공업분석, 원소분석, 발열량분석을 실시하였고, 화학적 구조를 알아보고자 FT-IR, NMR 분석을 하였다. 공업분석을 통해 무회분석탄의 회분함량이 원탄에 비해 줄어든 것을 확인하였다. FT-IR 분석 결과 감압건조로 회수한 샘플은 추출용매의 피크가 나타나는 반면 희석침전방식으로 제조한 무회분석탄에는 추출용매 피크가 사라지는 것을 확인하였다. 희석침전방식을 사용할 경우 다른 회수방식에 비해 저온공정이 가능하였고, 추출용매로부터 무회분석탄을 보다 확실하게 분리할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.559-569
• /
• 2018

Catalytic supports made of carbon have many advantages, such as high coking resistance, tailorable pore and surface structures, and ease of recycling of waste catalysts. Moreover, they do not require pre-reduction. In this study, ash-free coal (AFC) was obtained by the thermal extraction of carbonaceous components from raw coal and its performance as a carbon catalytic support was compared with that of well-known activated carbon (AC). Nickel was dispersed on the carbon supports and the resulting catalysts were applied to the steam reforming of toluene (SRT), a model compound of biomass tar. Interestingly, nickel catalysts dispersed on AFC, which has a very small surface area (${\sim}0.13m^2/g$), showed higher activity than those dispersed on AC, which has a large surface area ($1,173A/cm^2$). X-ray diffraction (XRD) analysis showed that the particle size of nickel deposited on AFC was smaller than that deposited on AC, with the average values on AFC ${\approx}11nm$ and on AC ${\approx}23nm$. This proved that heteroatomic functional groups in AFC, such as carboxyls, can provide ion-exchange or adsorption sites for the nano-scale dispersion of nickel. In addition, the pore structure, surface morphology, chemical composition, and chemical state of the prepared catalysts were analyzed using Brunauer-Emmett-Taylor (BET) analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, and temperature-programmed reduction (TPR).

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1998년도 하계종합학술발표회 논문집(하)
• /
• pp.1164-1167
• /
• 1998

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2001년도 추계연구발표회 논문개요집
• /
• pp.124-125
• /
• 2001

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1999년도 제2회 총회 및 춘계학술발표회
• /
• pp.79-79
• /
• 1999

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1500-1505
• /
• 2004

This paper presents the design and control of a small Brushless DC (BLDC) Motor for entertainment robots. In order to control the developed BLDC motor, Adaptive Fuzzy Control (AFC) scheme via Parallel distributed Compensation(PDC) is developed for the multi- input/multi-output plant model represented by the Takagi-Sugeno(TS) model. The alternative AFC scheme is proposed to provide asymptotic tracking of a reference signal for the systems with uncertain or slowly time-varying parameters. The developed control law and adaptive law guarantee the boundedness of all signals in the closed-loop system. In addition, the plant state tracks the state of the reference model asymptotically with time for any bounded reference input signal. The suggested design technique is applied to the velocity control of a developed small BLDC motor for entertainment robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.63-67
• /
• 2004

The problem is improving the positioning precision of a permanent magnet linear synchronous motor (PMLSM). Thus, this paper presents the design and realization of an adaptive dither to reduce the force ripple in PMLSM. A composite control structure is used, consisting of three components: a simple feed-forward component, a PID feedback component and an adaptive feed-forward compensator (AFC). Especially adaptive feed-forward component cancel out detent force using wavelet transformation. Computer simulation results verify the effectiveness of the proposed scheme for high precision motion trajectory tracking using the PMLSM