• Composites Research
• /
• 제24권6호
• /
• pp.49-55
• /
• 2011

복합재는 금속보다 높은 비강성과 비강도를 갖는 장점 때문에 군용기와 민항기의 주요 구조물로 사용이 증대되고 있다. 하지만 복합재의 기계적인 특성은 충격에 의해 심각하게 저하된다. 특히, 우박, 고속 택싱에 의한 파편과의 고속 충격은 작은 질량임에도 불구하고 구조물과 서브시스템에 심각한 손상을 줄 수 있다. 그러나 한 가지 센서 또는 기존의 기법을 사용하여 복합재의 손상을 탐지하기는 쉽지 않다. 본 논문에서는 복합적층판의 고속충격에 의한 손상 개시와 전파를 모니터링하기 위해 PVDF 센서와 AE 센서를 사용하였다. 센서 신호를 분석하기 위해 웨이블릿 변환을 사용하였다. 충격에너지가 증가할수록 고주파 신호가 증가하였고 PVDF 센서와 AE 센서 신호에서 유사한 경향을 알 수 있었다. 결과적으로 복합적층판의 고속충격손상을 감지하고 특성화하는 다양한 센싱 기법을 제시하였다.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.511-525
• /
• 2024

Underground openings significantly affect the mechanical stability of underground spaces and create damaged zones. This study investigated the acoustic emission (AE) characteristics associated with the formation of damaged zones around circular openings. Uniaxial compression experiments were conducted on three types of rock specimens, namely, granite (GN-1 and GN-2), gabbro (GB), and slate (SL), containing a circular opening. AE and digital image correlation (DIC) techniques were used to monitor and evaluate the damaged zones near the circular openings. The AE characteristics were evaluated using AE parameters, including count, energy, amplitude, average frequency, and RA value. The DIC results revealed that the estimated diameters of the damaged zones of GN-1, GN-2, GB, and SL were 1.66D, 1.53D, 1.49D, and 1.9D, respectively. The average displacements at the surface of the damaged zones for these specimens were 0.814, 0.786, 0.661, and 0.673 mm, respectively, thus demonstrating a strong correlation with Young's modulus. The AE analysis with DIC revealed that tensile failure occurred in the direction parallel to the maximum compression axis as the load increased. Thus, this study provides fundamental data for a comprehensive analysis of damaged zones in underground openings and will facilitate the optimization of rock engineering projects and safety assessments thereof.

• 대한관절경학회지
• /
• 제13권2호
• /
• pp.170-173
• /
• 2009

슬개골 골절의 고정 방법에 있어 강선 고정술은 흔히 사용되는 수술 방법중 하나이다. 슬관절의 조기 재활을 위해서는 견고한 고정술이 필요하다. 일반적으로 슬개골 골절의 수술적 내고정술 후 장기간 제거하지 않을 경우, 강선의 파절이 흔히 발생하며, 파절된 강선 조각은 관절막 외부의 연부조직 내에서 이동한다. 그러나, 저자들은 슬개골 골절의 수술 후 조기 파절된 강선 조각이 관절강내의 슬와공을 통하여 슬와부로 이동한 64세 남자를 관절경적 및 관혈적 방법을 이용하여 성공적으로 치료하였으며, 이에 문헌고찰과 함께 보고하고자 한다.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.36-48
• /
• 1999

Fatigue life and crack retardation behavior after penetration were experimentally examined using surface pre-cracked specimens of aluminium alloy 5083. The Wheeler model retardation parameter was used successfully to predict crack growth behavior after penetration. By using a crack propagation rule, the change in crack shape after penetration can be evaluated quantitatively. Advanced, waveform-based acoustic emission (AE) techniques have been successfully used to evaluate signal characteristics obtained form fatigue crack propagation and penetratin behavior in 6061 aluminum plate with surface crack under fatigue stress. Surface defects in the structural members are apt to be origins of fatigue crack growth, which may cause serious failure of the whole structure. The nondestructive analysis on the crack growth and penetration from these defects may, therefore, be one of the most important subjects on the reliability of the leak before break (LBB) design. The goal of the present study is to determine if different sources of the AE could be identified by characteristics of the waveforms produced from the crack growth and penetration. AE signals detected in four stages were found to have different signal per stage. With analysis of waveform and power spectrum in 6061 aluminum alloys with a surface crack, it is found to be capabilities on real-time monitoring for the crack propagation and penetration behavior of various damages and defects in structural members.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.133-137
• /
• 2003

The shock absorber for vehicles is the important component to absorb the shock in driving. These essential components, piton and piston rod, must be made of S25C, S45C and SCM440 generally depending on kind of vehicles, precisely machined and assembled by the bolt. And it has been difficult to weld this sort of dissimilar materials. They could be unstable in the quality by the conventional arc welding. And also they have a lot of technical problems in manufacturing. But by the friction welding technique, it will be able to be made without such problems. These factors above necessitate nowadays the domestic development of the shock absorber by friction welding and a new approach of study on real-time quality evaluation by AE techniques.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1468-1473
• /
• 2013

This paper dealt with the propagation characteristics of acoustic signals produced by partial discharges and the positioning of PD origin in insulation oil to develop insulation diagnostic techniques of oil-immerged transformers. Electrode systems such as needle to plane, plane to plane, and particle electrodes were fabricated to simulate some defects of power transformers. In addition, the frequency spectrum and propagation characteristics of acoustic signals with partial discharge (PD) in insulation oil were analyzed. Although there were differences based on the type of defect, the frequency spectra of the acoustic signals measured by wide and narrow band acoustic emission (AE) sensors were distributed in the range of 50 kHz-400 kHz. Therefore, a narrowband AE sensor is suitable for the diagnosis of oil-immersed power transformers. We could find the position of the PD source with an error margin of 10% in the experiments by calculating the position of the PD occurrence using the time difference of arrival measured by five AE sensors.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제4권1호
• /
• pp.44-50
• /
• 2001

Existing surface defects in structural members often act as sites of fatigue crack initiation, and if undetected, these cracks may grow through the thickness of the member, leading to catastrophic failure of the structure. Thus, in-service monitoring of fatigue cracks through reliable and effective nondestructive techniques is an important ingredient in the leak-before-break (LBB) design and safe operation of defects critical structures. An advanced, waveform-based, acoustic emission (AE) technique has been used in this paper to study the characteristics of the signals emanating from the initiation, growth and through-the -thickness penetration of surface fatigue crack in a 6061 aluminum plate. The goal of this experimental study is to determine whether the evolution of the fatigue crocks could be identified from the properties of the waveforms produced during the tests. The AE waveform signals detected at different stages of crack growth was found to have different temporal and spectral characteristics. The data analysis technique presented here can be applied to real-time monitoring of the initiation and propagation of fatigue cracks in structural components.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.24-35
• /
• 1997

The hydraulic or pneumatic valve spools become essential as the important components on the production of automatic hydraulic or pneumatic as mechanical industry has been rapidly developed. The machining precision is in necessity for manufacturing the valve spools. They could be unstable in the quality by the conventional are welding. And also they have a lot of technical problems in manufacturing because their shapes are generally small. By the precision casting process such as lost wax process, the production cost may be increased. But by the friction welding technique, they will be able to be manufactured without such problems. This paper deals with the development of dissimilar friction welding optimization for the hydraulic or pneumatic valve spool by friction welding and a new approach of on real-time qualify evaluation by AE techniques.

• 분석과학
• /
• 제24권3호
• /
• pp.219-224
• /
• 2011

카본나노튜브 전극과 금 전극을 사용한 Cl(I) 이온의 전압전류 분석법을 비교 연구하였다. 금 전극이 카본나노튜브 전극보다 Cl(I) 이온에 민감하게 반응함을 보였다. 위 조건에서 금 전극의 순환 전압 전류법과 벗김 전압 전류법의 최적 조건을 실험한 결과 $6.5\;{\mu}g/L$ Cl(I) 이온의 검출한계에 도달 하였다. 최적의 조건에서 기존에 상용되는 Cl이온 미터와 먹는 물 속의Cl(I) 이온 농도를 비교한 결과 보다 민감하게 반응하였다.

• 한국해양공학회지
• /
• 제19권1호
• /
• pp.44-48
• /
• 2005

The shock absorbers for marine vehicles are very important components to absorbing the shock resulting from driving. Depending on the kinds of vehicles, these essential components, piston and piston rod, must be made of S25C, S45C, and SCM440, must be precisely machined, and assembled by the bolts. Other materials used have been difficult to weld, and could be unstable in quality, by the conventional arc welding. Also, they have been associated with a lot of technical problems in manufacturing. However, using the friction welding technique, such problems will be avoided. These factors have necessitated the domestic development of the marine shock absorber using a friction welding, as well as stimulating a new approach to the study of real-time weld quality evaluation by AE techniques.