• 제목/요약/키워드: AE parameters

검색결과 419건 처리시간 0.023초

폴리에스터 섬유의 저욕비염색공정에 있어서 직물특성과 균염성의 상관성 분석 (Correlation between Levelness and Fabric Characteristics for Low Liquor Ratio Dyeing Processes of Polyester Fibers)

  • 정종석;장경진;김태경;조성우;이용진;남창우
    • 한국염색가공학회지
    • /
    • 제21권1호
    • /
    • pp.59-66
    • /
    • 2009
  • The seven kinds of polyester fabrics having different fabric characteristics were investigated in terms of their dyeing levelness under various liquor ratios. The levelness was evaluated statistically from color strength obtained at different sections of each piece of dyed fabrics. The color strength data were analyzed using a exponential decay function of 3 parameters, $y=y_0+ae^{-bx}$. The b value of the function was used as a index of sensitiveness of dependence on liquor ratio of levelness. The index, b value, showed a linear proportional relationship to thickness of fabrics. Average unlevelness of dyeings exhibited a inverse proportional relationship to both weight and thickness of fabrics.

장파복사 모형의 매개변수 추정 (Parameters Estimation in Longwave Radiation Formula)

  • 조홍연;이길하;이정미
    • 환경영향평가
    • /
    • 제21권2호
    • /
    • pp.239-246
    • /
    • 2012
  • Daily net radiation is essential for heat budget analysis for environmental impact assessment in the coastal zone and longwave radiation is an important element of net radiation because there is a significant exchange of radiant energy between the earth's surface and the atmosphere in the form of radiation at longer wavelengths. However, radiation data is not commonly available, and there has been no direct measurement for most areas where coastal environmental impact assessment is usually most needed. Often an empirical equation, e.g., Penman and FAO-24 formulae is used to estimate longwave radiation using temperature, humidity, and sunshine hour data but local calibration may be needed. In this study, local recalibration was performed to have best fit from a widely used longwave equation using the measured longwave radiation data in Korea Global Atmospheric Watch Center (KGAWC). The results shows recalibration can provided better performance AE=0.23($W/m^2$) and RMSE=14.73($W/m^2$). This study will contribute to improve the accuracy of the heat budget analysis in the coastal area.

음성장애환자에게서의 우울감 연구 (A Study of depression symptom in patients with voice disorders)

  • 강영애;구본석
    • 말소리와 음성과학
    • /
    • 제7권2호
    • /
    • pp.47-54
    • /
    • 2015
  • The objectives of this study are to research the frequency of depression symptom in patients with voice disorders and to investigate parameters associated with depression from voice evaluation. A hundred ninety six patients(106 males and 90 females) who had been diagnosed with voice disorders first in their lifetime were selected. All the patients were examined by laryngeal stroboscopy. For depression and voice study, personal interview, acoustic and aerodynamic analysis, voice handicap index(VHI), reflux symptom index(RSI), and beck depression index(BDI) were done respectively. Mild to severe BDI were seen in 26.2%(52 patients) of the whole patients. A BDI mean score of female patients was $8.8{\pm}7.5$ which was higher than that of male patients($5.6{\pm}6.6$), the difference observed being statistically significant(p<0.001). In the acoustic analysis, the score of sent_duration parameter was increasing in the patients with depression, which was significantly higher than the score of the patients without depression(p<0.05). In the addition, the scores of VHI and RSI were higher in the patients with depression(p<0.001). Our findings suggest that the prevalence of depression in patients with voice disorders is related to female, speaking velocity, and self-questionnaire. This result can be used for psychologically based approach to therapy.

성대마비로 인한 기식 음성에 대한 Cepstral 분석 (A Cepstral Analysis of Breathy Voice with Vocal Fold Paralysis)

  • 강영애;성철재
    • 말소리와 음성과학
    • /
    • 제4권2호
    • /
    • pp.89-94
    • /
    • 2012
  • The aim of this study is to investigate the usefulness of the parameter CPP (cepstral peak prominence) and LTAS (long term average spectrum) band energy for an analysis of breathy voice with vocal fold paralysis. Thirty-four female subjects who have vocal paralysis after thyroidectomy participated in this study. According to the perceptual judgements by three speech pathologists and one phonetic scholar, subjects were divided into two groups: breathy voice group (n = 21) and non-breathy voice group (n = 13). Maximum sustained phonation task was measured for acoustic analysis. CPP-related (i.e. mean F0, mean CPP, and mean CPPs) and LTAS-related (i.e. minimum, maximum, and mean) parameters were used. Independent samples t-test was conducted. Regarding CPP, there are significant differences in mean CPP and mean CPPs between groups. The values of mean CPP and CPPs in the non-breathy voice group are higher than those in the breathy voice group. The CPP could be regarded as the useful parameter for breathy voice analysis in the clinic. When it comes to LTAS, energy from 0 to 2 kHz are significantly different between groups. The minimum value of non-breathy group is lower than that of breathy group, whereas the maximum value of non-breathy group is higher. The frequency band below 2 kHz seems to be related to breathy voice.

단호박 가루의 첨가량을 달리한 스폰지 케익의 품질 특성 (Quality Characteristics of Sponge Cake with Added Dried Sweet Pumpkin Powders)

  • 우인애;김용선;송태희;이순규;최희숙
    • 한국식품영양학회지
    • /
    • 제19권3호
    • /
    • pp.254-260
    • /
    • 2006
  • The mechanical and sensory characteristics of sponge cake made with different levels (0, 3, 6, 9, and 12%) of added sweet pumpkin powder were evaluated. The Hunter's L value of the crust and crumb of the sponge cake decreased significantly(p<0.05) as the content of pumpkin powder increased. Mechanical texture parameters such as hardness, gumminess and chewiness increased significantly (p<0.05) as the addition of pumpkin powder increased. Significant differences were observed in yellow color of crust and crumb, pumpkin flavor, sweetness and hardness in sensory evaluation of sponge cake added with 12% sweet pumpkin powder. The springiness of the sponge cake in sensory evaluation decreased significantly as the 12% addition of pumpkin powder (p<0.05). The highest overall acceptability was observed with 6% pumpkin powder added to the sponge cake.

오디 추출물이 중년 남성의 항고지혈증에 미친 효과 (Mulberry Fruit Extract Consumption is Inversely Associated with Hyperlipidemia in Middle-aged Men)

  • 김애정;박수진;노정옥
    • 한국식품영양학회지
    • /
    • 제21권2호
    • /
    • pp.121-126
    • /
    • 2008
  • In a previous study, a mulberry fruit extract(MFE) supplement exhibited anti-inflammatory activity and improved serum lipid profiles in arthritic rats. The objective of this study was to determine whether dietary MFE could ameliorate inflammatory parameters and serum lipid levels in humans. Twenty-six middle-aged subjects(mean body mass index=27 $kg/m^2$) consumed MFE(100 $m{\ell}/day)$ after lunch for 4 wks. Anthropometric measurements, serum oxidative stress markers and serum lipid profile analyses were performed at baseline and then at 4 wk following the study. There were no significant differences in anthropometric measurements, including BMI, WHR, and body fat composition. After the 4 wk-intervention, serum levels of C-reactive protein(CRP), ferric-reducing ability of plasma(FRAP), serum triglyceride(TG) and LDL-cholesterol had significantly decreased(p<0.05), whereas serum levels of HDL-cholesterol significantly(p<0.05) increased. These findings suggest the consumption of mulberry extract may be protective against inflammation and the atherosclerotic state in elderly obese men at high risk for cardiovascular disease(CVD).

퍼지 모델을 이용한 배전 계통에서의 순간전압강하 평가 방식 (An Assessment Method for Voltage Sag in Power Distribution System using a Fuzzy Model)

  • 윤상윤;오정환;김언석;김낙경;김재철
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제49권4호
    • /
    • pp.177-184
    • /
    • 2000
  • In this paper, we proposes a method for assessing the effect of voltage sag in power distribution systems using fuzzy model. The proposed method is based on the reliability data of distribution system and specified computer business equipment manufacturer association(SCBEMA) curve that express the representative power acceptability curve by voltage sag for each customer type. The SCBEMA curves are made by using the CBEMA curves obtained from the experiment for the customers sensitive equipment. In order to transform SCBEMA curves to the differential damage by voltage sag, a fuzzy model is used. The proposed fuzzy model is composed to reflect two parameters of customers damage by voltage sag. One is the duration and magnitude of voltage sag and the other is the different risk due to the customer types. The Monte Carlo simulation method and the historical reliability data in KEPCO ae used for case studies.

  • PDF

Transport Properties of Polypyrrole Films Doped with Sulphonic Acids

  • Basavaraja, C.;Kim, Na-Ri;Jo, Eun-Ae;Pierson, R.;Huh, Do-Sung;Venkataraman, A.
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권11호
    • /
    • pp.2701-2706
    • /
    • 2009
  • The polymer blends containing polypyrrole (PPy) and the sulphonic acids such as β-naphthalene sulfonic acid (NSA), camphor sulfonic acid (CSA), and dodecylbenzenesulfonic acid (DBSA) were synthesized by in situ deposition technique in an aqueous media using ammonium per sulfate (APS) as an initiator. The obtained films were characterized by scanning electron microscopy (SEM), and the thermal behavior of these polymer blends was analyzed by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The temperature-dependent (DC) conductivity of the obtained films shows a semiconducting behavior with a negative temperature coefficient of resistivity (TCR). The conductivity data were also analyzed through Mott’s equation, which provides the variable range hopping model in three dimensions. The parameters such as density of states at the Fermi energy, hopping energy, and hopping distance were calculated for PPy, PPy-NSA, PPy-CSA, and PPy-DBSA films, and the data were compared.

Decreased entropy of unfolding increases the temperature of maximum stability: Thermodynamic stability of a thioredoxin from the hyperthermophilic archaeon Methanococcus jannaschii

  • Lee, Duck-Yeon;Kim, Kyeong-Ae;Kim, Key-Sun
    • 한국자기공명학회논문지
    • /
    • 제8권1호
    • /
    • pp.1-18
    • /
    • 2004
  • A thioredoxin from hyperthermophile, Methanococcus jannashii (MjTRX) was characterized by use of the differential scanning calorimetry to understand the mechanisms of thermodynamic stability. MjTRX has an unfolding transition temperature of 116.5$^{\circ}C$, although the maximum free energy of the unfolding (9.9 Kcal/mol) is similar to that of E. coli thioredoxin (ETRX, 9.0 Kcal/mol). However, the temperature of maximum stability is higher than ETRX by 20$^{\circ}C$, indicating that the unfolding transition temperature increased by shifting the temperature of maximum stability. MjTRX has lower enthalpy and entropy of the unfolding compared to ETRX maintaining a similar free energy of the unfolding. From the structure and the thermodynamic parameters of MjTRX, we showed that the unfolding transition temperature of MjTRX is increased due to the decreased entropy of the unfolding. Decreasing the unfolded state entropy and increasing the folded state entropy can decrease the entropy of the unfolding. In the case of MjTRX, the increased number of proline residues decreased the unfolded state entropy and the increased enthalpy in the folded state increased the folded state entropy.

  • PDF

A Study on Fabrication of Magnetic Thin Film Inductors for DC-DC Converter

  • Lee, Young-Ae;Kim, Sang-Gi;Do, Seung-Woo;Lee, Yong-Hyun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.225-225
    • /
    • 2010
  • In this study, the optimum structure of a magnetic thin film inductor was designed for application of DC-DC converters. The $Ni_{81}Fe_{19}$ (at%) alloy was selected as a high-frequency($\geq$ MHz) magnetic thin film core material and deposited on various substrates (bare Si, $SiO_2$ coated Si) using a high vacuum RF magnetron sputtering system. As-deposited NiFe thin films show similar magnetic properties compared to bulk NiFe alloys, indicating that they have a good film quality. The optimum design of solenoid-type magnetic thin film inductors was performed utilizing a Maxwell computer simulator (Ansoft HFSS V7.0 for PC) and parameters obtained from the magnetic properties of magnetic core materials selected. The high-frequency characteristics of the inductance(L) and quality factor(Q) obtained for the designed inductors through simulation agreed well with those obtained by theoretical calculations, confirming that the simulated result is realistic. The optimum structure of high-performance ($Q{\geq}60$, $L\;=\;1{\mu}H$, efficiency${\geq}90%$), high-frequency (${\geq}5MHz$), and solenoid-type magnetic thin film inductors was designed successfully.

  • PDF