• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.90-97
• /
• 2019

The charge redistribution digital-to-analog converter(CR-DAC) is often used for successive approximation register analog-to-digital converter(SAR ADC) that requiring low power consumption and small circuit area. However, CR-DAC is required 2 to the power of N unit capacitors to generate reference voltage for successive approximation of the N-bit SAR ADC, and many unit capacitors occupy large circuit area and consume more power. In order to improve this problem, this paper proposes SAR ADC using series capacitor DAC. The series capacitor DAC is required 2(1+N) unit capacitors to generate reference voltage for successive approximation and charges only two capacitors of the reference generation block. Because of these structural characteristics, the SAR ADC using series capacitor DAC can reduce the power consumption and circuit area. Proposed SAR ADC was designed in CMOS 180nm process, and at 1.8V supply voltage and 500kS/s sampling rate, proposed 6-bit SAR ADC have signal-to-noise and distortion ratio(SNDR) of 36.49dB, effective number of bits(ENOB) of 5.77-bit, power consumption of 294uW.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.77-86
• /
• 2010

In this paper, we present a noncoherent IR-UWB (Impulse Radio-Ultra Wide Band) ranging system with an AFE (Analog Front End) composed of a simple integrator and an 1-bit ADC (Analog-to-Digital Converter), and define AFE characteristics affecting the ranging performance. This system is realistic and easy to implement, since the integrator simply accumulates signal energies and the simple 1-bit ADC is applied instead of the multi-bit ADCs for coherent IR-UWB systems. On the other hand, its ranging accuracy is largely affected channel environments such as noise, multipath fading and so on, since the noncoherent receiver simply squares and integrates the received signals. However, despite these practical importances, there are few conventional researches on the performance analysis according to AFE characteristics in IR-UWB ranging systems. To this end, we analyze in this paper ranging performance according to AFE characteristics for the noncoherent IR-UWB ranging system in various wireless channel environments, and through these results we also present system parameters to be considered in UWB hardware designs.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.309-315
• /
• 1998

This paper describes an 8b 52 MHz CMOS subranging analog-to-digital converter (ADC) for Integrated Services Digital Network (ISDN) applications. The proposed ADC based on the improved time-interleaved architecture removes the holding time which is typically observed in the conventional double-channel subranging ADCs to increase throughput rate. Moreover, the ADC employs the interpolation technique in the back-end subranging ADCs far residue signal processing to minimize die area and power consumption. The fabricated and measured prototype ADC in a 0.8 um n-well double-poly double-metal CMOS process typically shows a 52 MHz sampling rate at a 5 V supply voltage with 230 mW, and a 40 MHz sampling rate at a 3 V power supply with 60 mW power consumption.

• Journal of Radiation Protection and Research
• /
• v.12 no.1
• /
• pp.12-25
• /
• 1987

A basic multichannel analyser (MCA) system have been designed and constructed with the successive approximation type ADC (Analog to Digital Converter). Linear Gate, window, and palse stretcher consist of mainly linear and logic IC's, and are properly combined together to achieve short dead time and good linearity of the system. ADC 1211 (analysing time: $120{\mu}sec$) and S-RAM (static random acess memory) 6264 are used in ADC module. Two 6264 memories are connected in parallel in order to-provide enough counting capacity ($2^{16}-1$). Interfaced microcomputer Apple II controls this system and analizes the counted data. The system is tested by input pulses between 0V to 10V from oscillator.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.4
• /
• pp.25-35
• /
• 2002

This work describes an 8b 200MHz time-interleaved subranging analog-to-digital converter (ADC) based on a single-poly digital CMOS process. Two fine ADCs for lower digital bits of the proposed ADC employ a time-sharing double-channel architecture to increase system speed and a new reference voltage switching scheme to reduce settling time of the reference voltages and chip area. The proposed intermeshed resistor string, which generates reference voltages for fine ADCs, improves linearity and settling time of the reference voltages simultaneously. The proposed sample- and-hold amplifier(SHA) is based on a highly linear common-drain amplifier and passive differential circuits to minimize power consumption and chip area with 8b accuracy and employs input dynamic common mode feedback circuits for high dynamic performance at a 200MHz sampling rate. A new encoding circuit in a coarse ADC simplifies the signal processing between the coarse ADC and two successive fine ADCs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.13-20
• /
• 2008

In this paper, an 1.8V 12-bit 10MSPS CMOS A/D converter (ADC) is described. The architecture of the proposed ADC is based on a folding and interpolation using an even folding technique. For the purpose of improving SNR, cascaded-folding cascaded-interpolation technique, distributed track and hold are adapted. Further, a digital encoder algorithm is proposed for efficient digital process. The chip has been fabricated with $0.18{\mu}m$ 1-poly 4-metal n-well CMOS technology. The effective chip area is $2000{\mu}m{\times}1100{\mu}m$ and it consumes about 250mW at 1.8V power supply. The measured SNDR is about 46dB at 10MHz sampling frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.7
• /
• pp.623-629
• /
• 2013

This paper presents the implementation result of the EEG(electroencephalogram) signal transmission protocol and its test platform. EEG measured by a dry-type electrode is directly converted into digital signal by ADC(analog-to-digital converter). Thereafter it is transferred DSP(digital signal processor) platform by $I^2C$(inter-integrated circuit) protocol. DSP conducts the pre-processing of EEG and extracts feature vectors of EEG. In this work, we implement the $I^2C$ protocol with 16 channels by using 10 or 12-bit ADC. In the implementation results, the overhead ratio for the 4 bytes data burst transmission measures 2.16 and the total data rates are 345.6 kbps and 414.72 kbps with 10-bit and 12-bit 1 ksps ADC, respectively. Therefore, in order to support a high speed mode of $I^2C$ for 400 kbps, it is required to use 16:1 and $(8:1){\times}2$ ratios for slave:master in 10-bit ADC and 12-bit ADC, respectively.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.408-410
• /
• 2007

A 9-bit 80-MS/s CMOS pipelined folding analog-to-digital converter employing offset-canceled preamplifiers and a subranging scheme is proposed to extend the resolution of a folding architecture. A fully differential dc-decoupled structure achieves high linearity in circuit design. The measured differential nonlinearity and integral nonlinearity of the prototype are ${\pm}0.6$ LSB and ${\pm}1.6$ LSB, respectively.

• Journal of Sensor Science and Technology
• /
• v.27 no.1
• /
• pp.31-35
• /
• 2018

This paper describes a low-power, SNDR (signal-to-noise and distortion ration) enhanced SAR (successive approximation register) type 12b ADC (analog-to-digital converter) with noise shaping technique. For low power consumption and small chip size of the DAC (digital-to-analog converter), the top plate sampling technique and the dummy capacitor switching technique are used to implement 12b operation with a 10b capacitor array in DAC. Noise shaping technique is applied to improve the SNDR by reducing the errors from the mismatching of DAC capacitor arrays, the errors caused by attenuation capacitor and the errors from the comparator noise. The proposed SAR ADC is designed with a $0.18{\mu}m$ CMOS process. The simulation results show that the SNDR of the SAR ADC without the noise shaping technique is 71 dB and that of the SAR ADC with the noise shaping technique is 84 dB. We can achieve the 13 dB improvement in SNDR with this noise shaping technique. The power consumption is $73.8{\mu}W$ and the FoM (figure-of-merit) is 5.2fJ/conversion-step.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.8-16
• /
• 2020

In this paper, a single-bit 2nd-order delta-sigma modulator with the architecture of cascaded-of-integrator feedforward (CIFF) is proposed for column-parallel analog-to-digital converter (ADC) array used in a low noise CMOS image sensor. The proposed modulator implements two switched capacitor integrators and a single-bit comparator within only 10-㎛ column-pitch for column-parallel ADC array. Also, peripheral circuits for driving all column modulators include a non-overlapping clock generator and a bias circuit. The proposed delta-sigma modulator has been implemented in a 110-nm CMOS process. It achieves 88.1-dB signal-to-noise-and-distortion ratio (SNDR), 88.6-dB spurious-free dynamic range (SFDR), and 14.3-bit effective-number-of-bits (ENOB) with an oversampling ratio (OSR) of 418 for 12-kHz bandwidth. The area and power consumption of the delta-sigma modulator are 970×10 ㎛2 and 248 ㎼, respectively.