• Journal of Environmental Science International
• /
• v.17 no.5
• /
• pp.493-500
• /
• 2008

This paper describes the adsorption/desorpton efficiency of a modified activated carbon by irradiated microwave to treat toluene. By employing microwave energy, the regeneration time was considerably shortened compared with conventional thermal heating regeneration. New adsorbent called ACB (Activated Carbon-Bentonite) was prepared from powder activated carbon with mixing bentonite as a binder. Specific surface area, average pore size and total pore volume of ACB were calculated from the nitrogen adsorption/desorption isotherm. The surface of ACB was characterized with scanning electron microscope(SEM). The results showed that the specific surface area, total pore volume, average pore size of ABC was not influenced by regenerating cycle with microwave irradiation. Toluene was adsorbed onto ACB which desorbed by MW irradiation. Absorption capacity of ACB was 0.117 $g_{toluene}/g_{ACB}$. Desorption efficiency of toluene increased as higher microwave output was applied.

• The Korean Journal of Pain
• /
• v.32 no.1
• /
• pp.30-38
• /
• 2019

Background: The adductor canal block (ACB) is an effective intervention for postoperative analgesia following total knee arthroplasty (TKA). However, the ideal ACB regimen has not yet been established. We compared the analgesic effects between a continuous ACB group and fentanyl-based intravenous patient-controlled analgesia (IV-PCA) with a single-shot ACB group. Methods: Patients who underwent TKA were randomly allocated to either a continuous ACB group (Group CACB) or IV-PCA with a single-shot ACB group (Group IVACB). Before the surgery, ultrasound guided ACB with 0.5% ropivacaine 20 cc was provided to all patients. Before skin incision, the infusion system (0.2% ropivacaine through an adductor canal catheter in group CACB vs. intravenous fentanyl in group IVACB) was connected. The postoperative pain severity; the side effects of local anesthetics and opioids; administration of rescue analgesics and anti-emetics; and sensorimotor deficits were measured. Results: Postoperative pain severity was significantly higher in the IVACB group at 30 min, 4 h, 24 h, and 48 h after surgery. The averages and standard deviations (SD) of the NRS score of postoperative pain were $0.14{\pm}0.37$, $4.57{\pm}2.37$, $6.00{\pm}1.63$, and $4.28{\pm}1.49$, respectively in the IVACB group. Rescue analgesic requirements and quadriceps muscle strength were not statistically different between the groups throughout the postoperative period. Moreover, rescue antiemetic requirements were higher in group IVACB than group CACB. Conclusions: In this study, the continuous ACB provided superior analgesia and fewer side effects without any significant motor deficit than the IV-PCA with a single-shot ACB.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.633-641
• /
• 1997

Spatial change of craniofacial structures from growth or orthopedic force is usually evaluated by cephalometric superimpositions at different points in time.As the evaluation cu be changed according to cephalometric superimposition method,selettion for correct superimposition method is very important.Double registration of nineteen pairs of female lateral head films,their growth period is average 3.7 years and age is overage 10.7 years,were performed by two observers.Comparisions was made between two methods and the results revealed the following, 1. NS line and ACB superimpositions ate not markedly different in reliability due to almost same registration error of them. 2. The investigation was undertaken to examine interobserver difference.In NS line method, there is no significance in all measurements. In ACB method,significant difference was revealed in 4 measurements of 7 measurements was 3. In the investigation of intermethod difference, there is no significance between NS line and ACB superimpositions

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.735-739
• /
• 2002

PTB(Power Transfer Breaker) is a device which incorporate the functions of ACB(Air Circuit Breaker) and ATS(Automatic Transfer Switch). ACB is a circuit breaker against overload and ATS is a switching device to transfer the load between two electric power sources. An existing PTB design based upon the 5 bar & cam mechanism has been regarded to be too complex and thus a simpler 4 bar mechanism with trigger lock is proposed. Experimentation and optimization of the trigger lock is presented.

• Journal of East-West Nursing Research
• /
• v.21 no.1
• /
• pp.36-42
• /
• 2015

Purpose: This study was conducted to identify the level of job stress and to determine factors influencing job stress among nurses currently under Academic Credit Bank (ACB) system. Methods: The participants were 153 nurses who has taken courses of ACB system. Data were collected through self-report questionnaires and then analyzed with t-test, ANOVA, Pearson correlation coefficients, and multiple linear regression with SPSS/WIN 18.0. Results: The score of job stress showed significant differences according to age, marital status, total period of clinical career, and nursing unit. Job stress had significant negative correlation to professional self-concept and organizational commitment. The factors influencing job stress were marital status, professional self-concept, and organizational commitment. Conclusion: The results suggest that various factors should be considered in development and implementation of programs to reduce the job stress of nurses currently under ACB system.

• Journal of Ginseng Research
• /
• v.44 no.1
• /
• pp.123-134
• /
• 2020

Background: The lepidopteran Asiatic corn borer (ACB), Ostrinia furnacalis (Guenee), has caused huge economic losses throughout the Asian-Western Pacific region. Usually, chemical pesticides are used for the control, but excessive use of pesticides has caused great harm. Therefore, the inartificial ecotypic pesticides to ACB are extremely essential. In our previous study, we found that panaxadiol saponins (PDS) can effectively reduce the harm of ACB by causing antifeedant activity. Therefore, it is necessary to reveal the biological molecular changes in ACB and the functionary mechanism of PDS. Methods: We analyzed the global transcription of ACB with different PDS concentration treatment (5 mg/mL, 10 mg/mL, and 25 mg/mL) by high-throughput sequencing and de novo transcriptome assembly method. Results: PDS treatment could cause the changes of many gene expressions which regulate its signal pathways. The genes in peroxisome proliferator-activated receptor (PPAR) signaling pathway were significantly downregulated, and then, the downstream fatty acid degradation pathway had also been greatly affected. Conclusion: Through this experiment, we hypothesized that the occurrence of antifeedant action of ACB is because the PDS brought about the downregulation of FATP and FABP, the key regulators in the PPAR, and the downregulation of FATP and FABP exerts further effects on the expression of SCD-1, ACBP, LPL, SCP-X, and ACO, which leads to the disorder of PPAR signaling pathway and the fatty acid degradation pathway. Not only that, PDS treatment leads to enzyme activity decrease by inhibiting the expression of genes associated with catalytic activity, such as cytochrome P450 and other similar genes.

• The Korean Journal of Pain
• /
• v.35 no.2
• /
• pp.191-201
• /
• 2022

Background: This study aimed to assess the efficacy of the adductor canal block (ACB) in comparison to intra-articular steroid-lidocaine injection (IASLI) to control chronic knee osteoarthritis (KOA) pain. Methods: A randomized, single-blinded trial in an outpatient rehabilitation clinic recruiting chronic KOA with pain ≥ 6 months over one year. Following randomization, subjects received either a single ACB or IASLI under ultrasound guidance. Numerical rating scale (NRS) scores for pain, and Knee Injury and Osteoarthritis Outcome Scores (KOOS) were recorded at baseline, 1 hour, 1 month, and 3 months postinjection. Results: Sixty-six knees were recruited; 2 were lost to follow-up. Age was normally distributed (P = 0.463), with more female subjects in both arms (P = 0.564). NRS scores improved significantly for both arms at 1 hour, with better pain scores for the IASLI arm (P = 0.416) at 1st month and ACB arm at 3rd month (P = 0.077) with larger effect size (Cohen's d = 1.085). Lower limb function improved significantly in the IASLI arm at 1 month; the ACB subjects showed greater functional improvement at 3 months (Cohen's d = 0.3, P = 0.346). Quality of life (QoL) improvement mirrored the functional scores whereby the IASLI group fared better at the 1st month (P = 0.071) but at the 3rd month the ACB group scored better (Cohen's d = 0.08, P = 0.710). Conclusions: ACB provides longer lasting analgesia which improves function and QoL in chronic KOA patients up to 3 months without any significant side effects.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.78-84
• /
• 2022

An air circuit breaker (ACB) is an electrical protection device that interrupts abnormal fault currents that result from overloads or short circuits in a low-voltage power distribution line. The ACB consists of a main circuit part for current flow, mechanism part for the opening and closing operation of movable conductors, and arc-extinguishing part for arc extinction during the breaking operation. The driving mechanism of the ACB is a spring energy charging type. The faster the contact opening speed of the movable conductors during the opening process, the better the breaking performance. However, there is a disadvantage that the durability of mechanism decreases in inverse proportion to the use of a spring capable of accumulating high energy to configure the breaking speed faster. Therefore, to simultaneously satisfy the breaking performance and mechanical endurance of the ACB, its driving mechanism must be optimized. In this study, a dynamic model of the ACB was developed using the MDO(Mechanism Dynamics Option) module of CREO, which is widely used in multibody dynamics analysis. To improve the opening velocity, the Taguchi design method was applied to optimize the design parameters of an ACB with many linkages. In addition, to evaluate the improvement in the operating characteristics, the simulation and experimental results were compared with the MDO model and improved prototype sample, respectively.

• The Korean Journal of Pain
• /
• v.33 no.2
• /
• pp.166-175
• /
• 2020

Background: The effect of dexmedetomidine as an adjuvant in the adductor canal block (ACB) and sciatic popliteal block (SPB) on the postoperative tramadol-sparing effect following spinal anesthesia has not been evaluated. Methods: In this randomized, placebo-controlled study, ninety patients undergoing below knee trauma surgery were randomized to either the control group, using ropivacaine in the ACB + SPB; the block Dex group, using dexmedetomidine + ropivacaine in the ACB + SPB; or the systemic Dex group, using ropivacaine in the ACB + SPB + intravenous dexmedetomidine. The primary outcome was a comparison of postoperative cumulative tramadol patient-controlled analgesia (PCA) consumption at 48 hours. Secondary outcomes included time to first PCA bolus, pain score, neurological assessment, sedation score, and adverse effects at 0, 5, 10, 15, and 60 minutes, as well as 4, 6, 12, 18, 24, 30, 36, 42, and 48 hours after the block. Results: The mean ± standard deviation of cumulative tramadol consumption at 48 hours was 64.83 ± 51.17 mg in the control group and 41.33 ± 38.57 mg in the block Dex group (P = 0.008), using Mann-Whitney U-test. Time to first tramadol PCA bolus was earlier in the control group versus the block Dex group (P = 0.04). Other secondary outcomes were comparable. Conclusions: Postoperative tramadol consumption was reduced at 48 hours in patients receiving perineural or systemic dexmedetomidine with ACB and SPB in below knee trauma surgery.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.777-781
• /
• 1997

One of the spring-link mechanisms, the air circuit breaker(ACB), was studied to improve the shock-proof characteristics of it. The low-cycle fatigue fracture phenomenon was occurred on the critical link, called h-link, of ACB for the repeated rapid closing and opening operations. To analyze the cause of failure, dynamic FE-analysis on the h-link part of ACB was accomplished with considered the velocity and acceleration of the links per time as boundary conditions, which were obtained by using ADAMS. Then, to reduce the maximum tensile stress on the h-link, three types of h-link were suggested and one of them was selected. Fmm this study, we suggested the process of analysis on the high-speed motion behavior part related low-cycle fatigue fractures.