• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.892-894
• /
• 1993

In this paper, a new control for the robust position control of a brushless direct drive(BLDD) motor using fuzzy logic controller(FLC) is presented. The integral-proportional(IP) position with speed FLC is employed to obtain the robust BLDD motor system, which is approximately linearized using the field-orientation method for an AC servo. The speed FLC for a BLDD motor has the two rule tables. One is the coarse rule table for the transient state and another is the fine rule table for the steady state. The overall system is controlled by using the microprossor in IBMPC 486 and the the robustness is also obtained.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.962-966
• /
• 1996

A conventional PI controller does not provide a proper response in face of various kinds of load variation. In this paper, three types of fuzzy-PI hybrid control scheme are proposed in order to improve the performance of the PI controller. The proposed control schemes are applied to the speed controller of AC servo motor systems. The effectiveness of the proposed methods is shown by computer simulation and the advantage of each control scheme is discussed.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.8
• /
• pp.352-359
• /
• 2002

A neuro-fuzzy controller has some problems that he difficulty of tuning up the membership function and fuzzy rules, long time of inferencing and defuzzifying compare to PID. Also, the fuzzy controller's own defect as a PD controller has. In this study, it is proposed two methods to solve these problems. The first method is that inner fuzzy rules are tuned up automatically by the back propagation learning according to error patterns. And the second method is a new type defuzzification method that shorten the calculation time of an inferencing and a defuzzifying. In this study, it is designed the new type neuro-fuzzy controller that improves the fast response and the stability of a system by using the proposed methods. And, the designed controller is named EPLNFC(Error pattern Learning Neuro-Fuzzy Controller). To evaluate the fast response and the stability of EPLNFC designed in this study, EPLNFC is applied to a speed control of a DC motor and AC motor.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.1-4
• /
• 1987

A cotroller is designed and implemented for a 4-axis SCARA type assembly robot. The controller is developed for velocity control and precise position control of the AC servo motor and a robot language SNUL-87 is designed using c-language , which is oriented towards an intelligent robot system.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.697-702
• /
• 1997

Control system of electric machine systems is often required to provide the good control performance even in the presence of various variable loads. In this study, time delay control technique is adopted to overcome such variable loads. Also, in this research a new approach of avoiding saturation by varying the reference model for the time delay control based systems subject to the step changes in reference inputs. These schemes are verified by applications to the position controls of the AC servo motor system and the engine throttle actuator.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.357-360
• /
• 1998

본 논문에서는 TI(Texas Instruments)사의 DSP칩 TMS320F240을 이용한 벡터드라이브 설계를 한다. TMS320F240은 서보모터드 라이브에 적합하게 상품화 된 칩으로 산업용 로봇제어에 필요한 대부분의 주변회로를 포함하고 있다. 이를 이용해서 제어기를 구성하면 적은 비용으로 신뢰성 높은 제어기를 구성할 수 있다. 드라이브는 크게 제어회로부와 파워회로부로 나누어서 설계했으며, AC서보모터에 벡터제어로 실제적용을 했다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.286-294
• /
• 1998

This paper presents an experimental study on the performance of the active damper device by feedback variables. The damper is a mass-typed active device, which exerts the inertia control force on the building by AC servo motor. The control performance is experimentally analyzed considering the building response and the control force. It is found that the building response is greatly reduced by mass-typed device under the resonant and earthquake loading. Also, the experimental results show that the velocity feedback reduces the building responses with the smallest amount of control force than any other feedback variables.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.281-284
• /
• 1996

Samsung Electronics has developed high performance velocity and position controllers for induction motors, and succeeded in mass production for the first time in Korea. Dynamic performance and final control accuracy of the controller are equivalent to those of AC servo motor controller. At present, we adopted the controller as spindle motor drive for Samsung CNC systems, and expect its wide use in industry as general purpose velocity and position controller for induction motor.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.3
• /
• pp.25-30
• /
• 2003

In this study, the controller using TMS320LF2407 low voltage DSP for motor control is designed and realized. It has 40 MIPS calculating ability and its driving voltage is 3.3 V for low power. The peripheral elements, however usually use 5 V and they need voltage transfer interface. In this study, voltage transformation and reducing noise are studied and space vector PWM is adopted as a motor control scheme. According to these methods, the efforts for software programming and calculation processes are reduced. In addition, the hardware is also simplified by substituting the current control part with software programming. Through this study, the DSP based servo controller increases its ability for high performance multi-function on semiconductor transportation equipments..

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.967-969
• /
• 2003

It is difficult to realize the complicate SUM which is applied vector control system, but widely used in AC motor vector motor control system or servo control system because of its high performance in current control. In this paper, we use the dynamic characteristic analyzing methode that can calculate efficiently the end effect by using equivalent circuit methode in the operating SLIM system modeling and doing simulation of output characteristics of vector controller.