• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.6
• /
• pp.433-439
• /
• 2018

This study considers the design of a submodule test circuit for the modular multi-level converter (MMC)-based HVDC systems. A novel submodule test circuit is proposed to provide not only an AC but also a DC component to the submodule current. However, the current waveforms depend on the capacitor voltages. Therefore, determining the capacitance value of the test circuit is important. Finding a proper capacitance value is easy when the proposed analysis method is used. Simulation and experimental results show the usefulness of the proposed method.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.591-601
• /
• 2019

With the development of renewable energy, grid-connected inverter technology has become an important research area. When compared with traditional silicon IGBT power devices, the silicon carbide (SiC) MOSFET shows obvious advantages in terms of its high-power density, low power loss and high-efficiency power supply system. It is suggested that this technology is highly suitable for three-phase AC motors, renewable energy vehicles, aerospace and military power supplies, etc. This paper focuses on the SiC MOSFET behaviors that concern the parasitic component influence throughout the whole working process, which is based on a three-phase grid-connected inverter. A high-speed model of power switch devices is built and theoretically analyzed. Then the power loss is determined through experimental validation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.271-282
• /
• 2021

The internet of things (IoT) technology is a key component for the advent of 4^th industrial revolution, which is the network of home appliances, infrastructures, and vehicles to remotely investigate these systems. For the operation of compact IoT devices, batteries are widely used as electric power, and the limited lifetime of batteries inevitably leads to periodic replacement. Magneto-mechano-electric (MME) generators may be alternatives to batteries inside the IoT devices by converting stray magnetic field into electric energy, since we are always surrounded by ambient alternating current (AC) magnetic fields induced from electric power transmission lines everywhere. This article reviews the recent domestic research progress in high-performance MME generators and their application field for IoT and electronic devices.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.143-149
• /
• 2022

As ESS safety issues increase recently, there is a need to more precisely monitor the temperature of the ESS. In this paper, DTS technology for temperature monitoring of ESS batteries is introduced and the temperature measurement principle is explained. The temperature of the battery module is measured using the DTS system, and the thermal deviation between battery cells inside the battery module is analyzed. In order to analyze how thermal imbalance affects the charging and discharging performance of the battery, an accelerated degradation test was conducted. Cycle life characteristics analysis, battery surface temperature change, and AC impedance characteristics were conducted to analyze how the performance of battery cells differs according to temperature conditions.

• Korean Journal of Materials Research
• /
• v.32 no.8
• /
• pp.333-338
• /
• 2022

In this work, we developed silver nanowires and a silicon based Schottky junction and demonstrated ultrafast broadband photosensing behavior. The current device had a response speed that was ultrafast, with a rising time of 36 ㎲ and a falling time of 382 ㎲, and it had a high level of repeatability across a broad spectrum of wavelengths (λ = 365 to 940 nm). Furthermore, it exhibited excellent responsivity of 60 mA/W and a significant detectivity of 3.5 × 10¹² Jones at a λ = 940 nm with an intensity of 0.2 mW cm^-2 under zero bias operating voltage, which reflects a boost of 50 %, by using the AC PV effect. This excellent broadband performance was caused by the photon-induced alternative photocurrent effect, which changed the way the optoelectronics work. This innovative approach will open a second door to the potential design of a broadband ultrafast device for use in cutting-edge optoelectronics.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.100-105
• /
• 2012

In previous study, to investigate the impression of the compound lighting based on the AC-Model at the full-size room, the impressions of various compound lighting were completed as compared with that of the uniform lightings through the comparison method (a paired comparison) by Semantic Differential scaling. Also, we examined the effect of the supplementary lighting type increasing the lights at the side of the window and the blind-control lighting type, and they were compared with the existing compound lighting type. In results, pared comparison of the compound lighting and the uniform lighting, indicates that the impression of the compound lighting is generally similar to that of the uniform lighting when there are same ratios of the light from the window. Based on these results, we suggest that the AC-Model might be applied to various conditions. And we also introduce the method for daylighting that it is possible to reduce discomfort glare and to improve visual impressions as the supplementary type and blind-control type on the compound lighting. And it was found that electric power consumption of the compound lighting room was lower than that of the uniform lighting room when as same lighting ratio of the compound lighting and the uniform lighting from the window was provided or there was the lighting distribution simulated to same light ratio from the window. Since the method of the ACModel was described in the experimental condition, additional studies should be performed to determine if this model could be applied to different window configurations, lighting layout and types of a room.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3947-3951
• /
• 2011

The nucleophilic substitution reactions of Y-aryl ethyl chlorothiophosphates with X-pyridines are studied kinetically in acetonitrile at $55.0^{\circ}C$. The Hammett and Bronsted plots for substituent X variations in the nucleophiles exhibit biphasic concave upwards with a break point at X = 3-Me. The substituents of X = 4-CN and 4-Ac show great positive deviations from both the Hammett and Bronsted plots. The Hammett plots for substituent Y variations in the substrates exhibit biphasic concave upwards with a minimum point at Y = H. The obtained values of the cross-interaction constants (${\rho}_{XY}$) are all in spite of the biphasic free energy correlations for both substituent X and Y variations, since the ${\rho}_X$values with both the strongly and weakly basic pyridines are almost constant. A stepwise mechanism with a rate-limiting leaving group departure from the intermediate is proposed where the distance between X and Y does not vary from the intermediate to the second transition state. A frontside attack is proposed with the strongly basic pyridines based on the considerably great magnitudes of ${\rho}_X$ and ${\beta}_X$ values and a backside attack is proposed with the weakly basic pyridines based on the relatively small magnitudes of ${\rho}_X$ and ${\beta}_X$. The positive deviations of the two strong ${\pi}$-acceptor parasubstituents, X = 4-Ac and 4-CN, from both the Hammett and Bronsted plots are rationalized by the great extents of bond formation and breaking.

• Textile Coloration and Finishing
• /
• v.4 no.3
• /
• pp.65-73
• /
• 1992

To control the hydrolysis rate of PET fabric with NaOH, HCl and $CH_3$COOH(HAc), as regulating reagent, were added to the 0.5 M NaOH solution. The concentrations of acids in 0.5 M NaOH were varied. PET fabrics were treated with aqueous solutions of acids in 0.5 M NaOH under different conditions. The weight loss of PET fabric, the rate of hydrolysis, the apparent activation energy (E$_{\alpha}$), the handle value, the etched surface of treated PET fabric, and the effect of salts such as NaCl, $CH_3$COONa(NaAc), and NH$_4$Cl on the weight loss were discussed. Acids in the aqueous 0.5 M NaOH solution decreased the weight loss of PET fabric bacause of neutralization of OH- and the weight loss of PET fabrics treated with corresponding concentration of aqueous NaOH solution to the concentrations of the aqueous solutions of acids in 0.5 M NaOH was lower than that of PET fabrics treated with aqueous solutions of acids in 0.5 M NaOH. The addition of NaCl to aqueous NaOH solution accelerated the reaction of OH- with PET greatly, the addition of NaAc increased the weight loss slightly, but the addition of NH$_4$Cl decreased the weight loss. It was thought that the very remarkable result that NaCl in aqueous NaOH solution promoted the hydrolysis of PET with NaOH would contribute to the conservation of energy and NaOH in the weight loss finishing process of PET fabric. The etched surface and the handle value of treated PET fabric were independent of the difference in the kinds of acids and salts added.nd salts added.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.842-848
• /
• 2018

The Smart plug is a device that connects between the outlet and the product at home, and it is an IoT type device that can drive energy saving and transmit information to the outside by power on / off control function and power measurement function. In this case, a smart plug that incorporates deep learning of intelligence technology that allows people to learn how to think about a computer, automatically classifies a product as it operates, and automatically tests the operating status of the washing machine by using input AC current pattern. Through this study, even if the product does not function as IoT, it can classify product type and operation state by smart plug connection alone, so we can draw a new paradigm of life pattern and energy saving in one family.

• Preventive Nutrition and Food Science
• /
• v.9 no.1
• /
• pp.39-44
• /
• 2004

This study investigated the effect of allium vegetable intake on the storage and utilization of energy substrates before, during, and after exercise in tissues of rats. Ninety rats were fed either a control diet or a diet with added Allium sativum (AS, garlic), Allium cepa (AC, onion), Allium fistulosum (AF, spring onion), or Allium tuberosum (AT, Chinese chives) for 4 weeks and were then subdivided into 3 groups: before-exercise (BE); during-exercise (DE); after-exercise (AE). The DE group was exercised on treadmill for 1 hour just before being sacrificed at the end of 4th week of the dietary treatment rats in the AE group were allowed to recuperate for 2 hours after being exercised like the DE group. The levels of glycogen (GLY), triglyceride (TG) and protein (PRO) were compared in liver and skeletal muscle. In the AS diet animals, the level of liver GLY was significantly higher than those of control animals in the BE, DE and AE groups. The level of muscle TG also tended to be higher in BE, but lower in AE than in control animals. In AC animals, the level of muscle GLY was significantly lower than those of control animals in BE, DE and AE. The level of muscle TG also tended to be higher than those of control animals in BE and DE but tended to be lower in AE. In AF animals, the level of muscle GLY was significantly lower than those of control animals in BE, DE and AE. The level of muscle TG was also significantly lower than those of control animals in BE, DE and AE groups. In AT animals, the level of muscle GLY was significantly lower than those of control animals in BE, DE and AE. These results suggest that Allium sativum diets enhance the capacity to store fuel before as well as during exercise and increases the potential to utilize the stored fuel during exercise.