• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.81-84
• /
• 1997

The hot deformation behavior of SiCp/AA2024 composites reinforced with different sizes of SiCp reinforcements (1, 8, 15, 36, and 44${\mu}{\textrm}{m}$) was investigated by hot torsion tests. The hot restoration of the composites depending on the SiCp reinforcements particle size was studied from the effective stress - strain curves. Dynamic recrystallization (DRX) was occurred in the SiCp/AA2024 composites during the hot deformation at 320 - 43$0^{\circ}C$ under a strain rate of 1.0/sec. Also, the critical strain for DRX decreased with decreasing the reinforcement size of SiCp from 44 to 8${\mu}{\textrm}{m}$. The composite reinforced with SiCp of 8${\mu}{\textrm}{m}$ showed the highest flow stress (265 MPa) and the work hardening rate at 32$0^{\circ}C$ under a strain rate of 1.0/sec.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.39-39
• /
• 2011

Surface hardening mechanism of AA 2024 was investigated when shot peeningprocess with shot ball of Zn alloy was applied. Zn alloy was transferred into surface region of AA 2024, forming lamellar structure of Al and Zn phase. Nanocrystallization of AA 2024 and alloyed Zn phase was achieved by the different mechanisms. Furthermore, precipitations in AA 2024 remained undissolved. Lamellar structure with different nano-sized grains of two different phase and randomly distributed precipitations contributed to the surface hardening.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1998년도 춘계학술발표회 초록집
• /
• pp.116-116
• /
• 1998

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1998년도 춘계학술발표회 초록집
• /
• pp.117-117
• /
• 1998

• Clinical and Experimental Vaccine Research
• /
• 제13권2호
• /
• pp.171-173
• /
• 2024

Alopecia areata (AA) is an autoimmune-related disorder characterized by non-scarring hair loss in children. We report the case of a child who had AA after the fifth dose of rabies vaccine and summarized various potential mechanisms of vaccination induced AA. This case indicates that rabies vaccine might be a predisposition of AA by causing immune dysregulation.

• 한국표면공학회지
• /
• 제53권2호
• /
• pp.80-86
• /
• 2020

This paper is concerned with type of imperfections present within the anodic oxide films on AA2024 and surface hardness of the anodic film measured after ink-impregnation. The anodic oxide films were formed for 25 min at 40 mA/㎠ and 15±0.5℃ and 300 rpm of magnet stirring rate in 20% sulfuric acid solution. The ink-impregnation allows clear observations of not only the imperfections within the anodic oxide films but also an indentation mark on the oxide film surface made by a pyramidal-diamond penetrator for the hardness measurement. There were observed four different regions in the anodic oxide films on AA2024 and the surface hardness of the anodic oxide films appeared to be crucially dependent on the type of defects, showing 60~100 H_v on the oxide surface region I with large size black defect, 100~140 H_v on the oxide surface region II with large size grey defect, 140~170 H_v on the oxide surface region III with mall size black and/or grey defects and 170~190 H_v on the oxide surface region IV without defects. The pyramidal indentation marks were observed to be distorted in the regions with a large size black and grey defects, while no distortion of the indentation mark was observed in the regions with small size defects and without visible defects.

• 한국분말재료학회지
• /
• 제26권4호
• /
• pp.275-281
• /
• 2019

An artificial neural network (ANN) model is developed for the analysis and simulation of correlation between flake powder metallurgy parameters and properties of AA2024-SiC nanocomposites. The input parameters of the model are AA 2024 matrix size, ball milling time, and weight percentage of SiC nanoparticles and the output parameters are density and hardness. The model can predict the density and hardness of the unseen test data with a correlation of 0.986 beyond the experimental data. A user interface is designed to predict properties at new instances. We have used the model to simulate the individual as well as the combined influence of parameters on the properties. Moreover, we have analyzed the calculated results from the powder metallurgical point of view. The developed model can be used as a guide for further composite development.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.216-219
• /
• 1997

Hot workability of SiCp/AA2024 composites reinforced with different vol. % of SiCp reinforcements (0, 5, 10, 15, 20, and 30 vol. %) was investigated by hot torsion tests. Hot restoration of the composites was studied from the flow curves and deformed microstructures. Dynamic recrystallization (DRX) was occurred in all the composites during the hot deformation at 370-43$0^{\circ}C$ under a strain rate of 1.0/sec. Also, the flow stress of the composites increased with increasing the SiCp reinforcement vol. % and the difference of flow stress between the composites decreased with increasing the deformation temperature.

• Corrosion Science and Technology
• /
• 제23권3호
• /
• pp.203-214
• /
• 2024

A heat exchanger is a device designed to transfer heat between two or more fluids. In a vehicle's thermal management system, Al heat exchangers play a critical role in controlling and managing heat for efficient and safe operation of the engine and other components. The fluid used to prevent heat exchangers from overheating the engine is mostly tap water. Heat exchange performance can be maintained at sub-zero temperatures using a solution mixed with antifreeze. Although the fluid flowing through the heat exchanger can reduce the temperature inside the engine, it also has various problems such as cavitation corrosion. Cavitation corrosion characteristics in tap water and corrosion characteristics were evaluated in this study when antifreeze was added for test specimens where AA4045 was cladded on the inner surface of AA3003 tubes of a fin-type heat exchanger. The cavitation corrosion resistance of AA3003 was found to be superior to that of AA4045 regardless of the test solution due to higher corrosion resistance and hardness of AA3003 than those of AA4045. The cavitation corrosion rate of Al alloys increased with the addition of antifreeze.

• 한국표면공학회지
• /
• 제53권6호
• /
• pp.351-359
• /
• 2020

Formation behavior and properties of PEO (Plasma Electrolytic Oxidation) film on AA2024 were investigated under application of pulsed current as a function of Na3PO4 concentration in 0.05 M Na2SiO3 solution by analyzing voltage-time behavior, in-situ observation of arc generation, observation of surface morphology and measurements of thickness and surface roughness. Arc generation voltage decreased with increasing Na3PO4 concentration. Color difference of PEO films between edge and inner part disappeared by addition of Na3PO4. It was also observed that size of nodules on PEO film decreased with increasing Na3PO4 concentration. Thickness of PEO films formed on AA2024 increased with increasing Na3PO4 concentration. Whereas, surface roughness of PEO films decreased with increasing Na3PO4 concentration up to 0.05 M of Na3PO4 which is attributed to the deceased size of nodules on the PEO films. However, the surface roughness increased with increasing Na3PO4 concentration more than 0.07 M of Na3PO4 which seems to be due to the formation of non-uniform PEO films with smooth surface and large size pores formed by orange-colored big arcs. The experimental results suggest that added sodium phosphate less than 0.2 M in an alkaline silicate solution can contribute to the formation of relatively thick and uniform thickness of PEO films under arc generation voltage lower than 300 V.