• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.98-102
• /
• 2010

This paper describes that single crystalline 3C-SiC (cubic silicon carbide) thin films have been deposited on carbonized Si(100) substrates using hexamethyldisilane (HMDS, $Si_2(CH_3){_6}$) as a safe organosilane single precursor and a nonflammable mixture of Ar and $H_2$ gas as the carrier gas by APCVD at $1280^{\circ}C$. The deposition was performed under various conditions to determine the optimized growth condition. The crystallinity of the 3C-SiC thin film was analyzed by XRD (X-ray diffraction). The surface morphology was also observed by AFM (atomic force microscopy) and voids between SiC and Si interfaces were measured by SEM (scanning electron microscopy). Finally, residual strain and hall mobility was investigated by surface profiler and hall measurement, respectively. From these results, the single crystalline 3C-SiC film had a good crystal quality without defects due to viods, a low residual stress, a very low roughness.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.517-526
• /
• 1990

The crystal structures of two alditol acetates, D-glucitol hexaacetate and xylitol pentaacetate, have been determined by diffraction methods with Mo-K$\alpha$radiation, using direct methods for phase determinations. The crystal data are: for D-glucitol hexaacetate, P2$_1$, with a = 10.275 (2), b = 8.363 (1), c = 12.560 (5) $\AA;\beta$ = 95.97 $(2)^{\circ}$, Z = 2; for xylitol pentaacetate, P2$_1$/C with a = 18.126 (1), b = 11.422 (2), c = 8.649 (1) $\AA$, $\beta = 95.03 (1)^{\circ}$, Z = 4. Both molecules have extended zigzag carbon chain conformations which differ from previous studies of the structures of D-glucitol and xylitol and also differ from NMR studies on alditol acetates. The bond lengths and angles are normal, with mean values over both structures of C($sp^3)-C(sp^3): 1.514 (10),\; C(sp^3)-O: 1.444 (6),\; C(sp^2)-O: 1.347 (9),\; C(sp^2)=O: 1.197 (6),\; C(sp^2)-C(sp^3): 1.479(9){\AA},\; C(sp^3)-C(sp^3)-C(sp^3): 114.6 (17),\; O-C(sp^3)-C(sp^3): 109.4 (23),\; C(sp^2)-O-C(sp^3): 117.4 (6),\; O=C(sp^2)-O: 122.6 (6),\; C(sp^3)-C(sp^2)-O: 111.8 (7),\; C(sp^3)-C(sp^2)=O: 125.5 (4)^{\circ}$. The atoms of acetate groups are in coplanar. There are no particularly short intermolecular contacts and the molecules are held together by van der Waals force only.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.18-23
• /
• 2003

Composite powder of$B_4C-A1_2O_3$was prepared from a mixed powder of$B_2O_3/A1/C$by SHS under argon pressure instead of using a chemical furnace. A mixture of$B_2O_3,$Al and C powder (equivalent amounts to the reaction,$2B_2O_3+4A1+C=B_4C+2A1_2O_3)$was ball milled for 2 h. The mixed powder was placed in a SHS reactor and filled with 10 atm of argon gas and ignited. The inner and outer products were the same by XRD analysis. It was consisted of a composite powder of$B_4C-A1_2O_3$without $AlB_{12}/C_2$which was always produced using a chemical furnace. The composite powder was about$60~100{mu}m$size which was composed of crystalline particles of about 0.3~l${mu}m$size. But when 15 atm of argon was employed, partial sintering took place to give rise hard composite powder of$15~25{mu}m$$B_4C$with $0.1~0.2{mu}m$$A1_2O_3.$

• Korean Journal of Crystallography
• /
• v.1 no.1
• /
• pp.14-18
• /
• 1990

Econazole nitrate, 1-{2-[(4-chlorophenyl)methoxy]-2-(2,4-dichlorophenyl) ethy1}-1H-imidazole mono-nitrate.C18 H16 CI13 N3 O4 Mw=444.7 Monoclinic P/2₁c,a=17.337(4)A, b=15.191(5), c=7.601(3)A, β=91.72(2)', V=2000.9A3, Z=4, Dc=1.49g/cm3, Dm=1.45g/cm3(mo-ka)= 0.7107A, μ=4.31cm-1, F(000)=912.0, T=298'K, final R=0.061 for 1330 unique observed reflection. Each of the three ring system for the stars with B,A and C ring in order whilst A and C ring of econazole lie close to the same plane which is nearly 60˚with B ring. The hydrogen binding nitrogen of C ring and oxygen of nitrate contributes to stailization of econazole nitrate. Intr and intermolecular distances and angles are within the values recorded for simiar compounds.

• Radiation Oncology Journal
• /
• v.17 no.2
• /
• pp.158-165
• /
• 1999

Purpose : To investigate the percentage of colonies wi1h16or more cells distribution of human skin fibroblast according to in vitro aging, and to evaluate the relationship between percentage of colonies with 10 or more cells and in vivo donor age in human skin fibroblast culture. Material and Method : C1, C2, C3a, and C3b human skin fibroblast samples from three breast cancer patients were used as subjects. The C1, C2, and C3a donor were 44, 54, and 55 years old, respectively. C3a and C3b cells were isolated from the same person. Single cell suspension of skin fibroblasts was prepared with primary explant technique. One hundred cells are plated into 100m1 tissue culture flask and cultured for two weeks. The colony size was defined as colonies with 16 or more cells. The cultured cell was stained with crystal violet, and number of cells in each colony was determined with stereo microscope at $\times$10 magnification. Passage number of C1, C2, C3a and C3b skin fibroblast were 12th, 17th, and 14th, respectively. Results : Percentage of colonies with 16 or more cells of skin fibroblast samples decreased with increasing in vitro passage number. In contrast, cumulative population doublings of skin fibroblast sample increased with increasing in vitro passage number. Percentage of colonies with 16 or more cells also decreased with increasing population doublings in human skin fibroblast culture. There was strong correlation with percentage of colonies with 16 or more cells and population doublings En C3a skin fibroblast sampie. At the same point of population doublings, the percentage of colonies with 16 or more cells of the young C1 donor was higher level than the old C3a donor. Conclusion : The population doublings increased with increasing in vitro passage number but percentage of colonies with 16 or more cells decreased. The results of this study imply that percentage of colonies with 16 or more cell is useful as a indicator of in vitro human skin fibroblast aging and may estimate the in vivo donor age.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.14-19
• /
• 1999

Using a single precursor of hexamethyldisilane $(Si_{2}(CH_{3})_{6})$, $\beta$-SiC film was successfully deposited on a Si substrate at $1100^{\circ}C$ by a chemical vapor deposition method. Selectivity of SiC deposition on a Si substrate partially covered with a masking material was investigated by introducing HCl gas into hexamethyldisilane/$H_{2}$ gas system during the deposition. The schedule of the precursor and HCl gas flows was modified so that the selectivity of SiC deposition between a Si substrate and a mask material should be improved. It was confirmed that the selectivity of SiC deposition was improved by introducing HCl gas. Also, the pulse gas flow technique was effective to enhance the selectivity.

• Kidney Research and Clinical Practice
• /
• v.37 no.4
• /
• pp.338-346
• /
• 2018

Background: The most common cause of acute kidney injury (AKI) in pregnancy is preeclampsia. Serum cystatin C (CysC) is a potential biomarker of early kidney damage as its levels are not disturbed by volume status changes in pregnancy, and serum CysC levels could serve as a replacement for conventionally used creatinine. In this study, we investigated the serum levels of CysC in severe preeclampsia cases and the associations between CysC levels and poor obstetric outcomes. Methods: Our cohort included severe preeclampsia patients with a normal serum creatinine level. Creatinine was measured to calculate estimated glomerular filtration rate (eGFR) based on the Cockcroft and Gault, Modification of Diet in Renal Disease Study (MDRD), and Chronic Kidney Disease Epidemiology Collaboration (CKD-EPI) equations, while CysC was measured to calculated eGFR based on a CysC-based equation. We then evaluated the correlations between serum CysC level, eGFR, and obstetric outcomes. Results: Twenty-six patients were evaluated of which 38.5% delivered preterm and 30.8% had low-birth weight babies. Unlike creatinine-based eGFR and CysC-based eGFR, serum CysC demonstrate significant negative correlation with gestational age. Receiver operating characteristic curve analysis indicated that serum CysC is a potential biomarker of preterm delivery with a cut-off serum level of 1.48 mg/L with 80% sensitivity and 75% specificity. Conclusion: GFR estimation using CysC is likely to be inaccurate in pregnancy. However, we found a significant correlation between preterm delivery and serum CysC level. Our results suggest that serum CysC level has the potential to predict preterm delivery in severe preeclampsia patients.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.3
• /
• pp.473-483
• /
• 2012

To achieve an entire end-to-end security, the classical authentication setting such that all participants have a same password is not practical since a password is not a common secret but a personal secret depending on an individual. Thus, an efficient client to client different password-based authenticated key agreement protocol (for short, EC2C-PAKA) has been suggested in the cross-realm setting. Very recently, however, a security weakness of the EC2C-PAKA protocol has been analyzed by Feng and Xu. They have claimed that the EC2C-PAKA protocol is insecure against a password impersonation attack. They also have presented an improved version of the EC2C-PAKA protocol. In this paper, we demonstrate that their claim on the insecurity of EC2C-PAKA protocol against a password impersonation attack is not valid. We show that the EC2C-PAKA protocol is still secure against the password impersonation attack. In addition, ironically, we show that the improved protocol by Feng and Xu is insecure against an impersonation attack such that a server holding password of Alice in realm A can impersonate Bob in realm B. We also discuss a countermeasure to prevent the attack.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.459-465
• /
• 2014

In this study, Si-SiC composites were fabricated using a Si melt infiltration method using ${\beta}$-SiC/C composite powders synthesized by the carbothermal reduction of $SiO_2-C$ precursors made from a TEOS and a phenol resin. The purity of the synthesized SiC-C composite powders was higher than 99.9993 wt% and the average particle size varied from 4 to $6{\mu}m$ with increasing carbon contents of the $SiO_2-C$ precursors. It was found that the Si-SiC composites fabricated in this study consist of ${\beta}$-SiC and residual Si, without any trace of ${\alpha}$-SiC. The 3-point bending strengths of the fabricated Si-SiC composites were measured and found to be higher than 550 MPa, although the density of the fabricated Si-SiC composite was less than $2.9g/cm^3$. The bending strengths and the densities of the fabricated Si-SiC composites were found to decrease with increasing C/Si mole ratios in the SiC-C composite powders. The specific resistivities of the Si-SiC composites fabricated using the SiC-C composite powders were less than $0.018{\Omega}cm$. With increasing C content in the SiC-C composite powders used for the fabrication of Si-SiC composites, the specific resistivity of the Si-SiC composites was found to slightly increase from 0.0157 to $0.018{\Omega}cm$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.212-216
• /
• 1999

SiC(3C) photodiodes (PDs) were fabricated on p-type Si(111) substrates using chemical vapor deposition (CVD) technique by pyrolyzing tetramethylsilane (TMS) with $H_{2}$ carrier gas. Electrical properties of SiC(3C) were investigated by Hall measurement and current-voltage (I-V) characteristics. SiC(3C) layers exhibited n-type conductivity. Ohmic contact was formed by thermal evaporation Al metal through a shadow-mask. The optical gain $(G_{op})$ of the SiC(3C)/Si PD was measured as a function of the incident wavelength. For the analysis of the photovoltaic detection of the Sic(3C) n/p PD, the spectral response (SR) has calculated by using the electrical parameters of the SiC(3C) layer and the geometric structure of the PD. The peak response calculated for properly chosen parameters was about 0.75 near 550 nm. We expect a good photoresponse in the SiC(3C) heterostructure for the wavelength range of 400~600 nm. The SiC(3C) photodiode can detect blue and near ultraviolet (UV) radiation.