• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Variables influencing the free face movement due to rock blasting include the physical and mechanical properties, in particular the discontinuity characteristics, explosive type, charge weight, burden, blast-hole spacing, delay time between blast-holes or rows, stemming conditions. These variables also affects the blast vibration, air blast and size of fragmentation. For the design of surface blasting, the priority is given to the safety of nearby buildings. Therefore, blast vibration has to be controlled by analyzing the free face movement at the surface blasting sites and also blasting operation needs to be optimized to improve the fragmentation size. High-speed digital image analysis enables the analyses of the initial movement of free face of rock, stemming optimality, fragment trajectory, face movement direction and velocity as well as the optimal detonator initiation system. Even though The high-speed image analysis technique has been widely used in foreign countries, its applications can hardly be found in Korea. This thesis aims at carrying out a fundamental study for optimizing the blast design and evaluation using the high-speed digital image analysis. A series of experimentation were performed at two large surface blasting sites with the rock type of shale and granite, respectively. Emulsion and ANFO were the explosives used for the study. Based on the digital images analysis, displacement and velocity of the free face were scrutinized along with the analysis fragment size distribution. In addition, AUTODYN, 2-D FEM model, was applied to simulate detonation pressure, detonation velocity, response time for the initiation of the free face movement and face movement shape. The result show that regardless of the rock type, due to the displacement and the movement velocity have the maximum near the center of charged section the free face becomes curved like a bow. Compared with ANFO, the cases with Emulsion result in larger detonation pressure and velocity and faster reaction for the displacement initiation.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.11
• /
• pp.65-71
• /
• 2013

Despite of the various merits of soil pavement, it has not been widely adapted because portland cement was conventionally used as soil stabilizer to improve the mechanical properties such strength parameters. Recently, natural soil stabilizer(NSS) were developed and virtually adopted to several case of soil pavement construction under control of heavy metal pollution compared to cement-used cases. However, the application of natural soil stabilizer is not settled yet, and empirical design have been widely adopted. In this study, therefore, the strength parameter of soil-NSS mixture was estimated by some triaxial compression tests, CU-test. From the tests, the relationship between curing period and strength parameter such as internal friction and effective cohesion was examined. As a result, effective cohesion of dredged clay and granite soil increased as curing time is increased. However, internal friction is almost same result in all soil type used in this study.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.565-578
• /
• 2019

Basic friction angles of Hwangdeung granite, Berea sandstone, Jeongsun marble, Hongcheon gneiss, Pungam shale and Eumseong sandy shale were measured by direct shear test, tilt test and pull test. Characteristics of basic friction angle and the accuracy of test methods were compared and the optimal method in measuring basic friction angle was suggested. Although basic friction angles might be measured accurately by direct shear test, the test apparatus is expensive and procedures are complicated. Tilt tests which is the suggested method for measuring basic friction angle by International Association for Rock Mechanics also provided similar basic friction angles measured by direct shear test. However, the error measured for the same rock type is higher than 7° and values by repeated measurements in one sample show different trends, such as increasing or decreasing or almost constant as measurements continued. The difference measured in one gneiss sample is higher 12°, indicating that tilt test may be not a reliable method for measuring basic friction angle. Not only pull test provided accurate and consistent results under low normal stresses, but also test apparatus is simple and inexpensive and procedure is not complicated, indicating that pull test may be the optimal method for measuring basic friction angle.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.265-280
• /
• 2003

The Mugeuk mineralized area that associated with the pull-apart type Cretaceous Eumseong basin is composed of several gold-silver vein deposits that are emplaced in late Cretaceous biotite granite. The gold-silver deposits in the area show various hydrothermal alteration zones as well as Au/Ag ratios and ore mineralogy. The Geumbong mine showing relatively high gold fineness is composed of multiple veins and show alteration pattern; vein \longrightarrow phyllic \longrightarrow subphyllic \longrightarrow propylitic \longrightarrow subpropylitic zone. In contrast, The Taegeuk mines show the low fineness values, in far southern part are characterized by increasing tendency of simple and/or stockwork veins. The deposit displays alteration pattern; vein \longrightarrow propylitic \longrightarrow subpropylitic zone. Variations of alteration zone with depth show that phyllic zone are dominant in deeper level and propylitic zone sporadically overlapped by argillic zone are dominant in shallow level. The differences of alteration pattern between the gold-silver deposits are reflect the evolution of the hydrothermal fluids; the ore-forming fluids of the Geumbong mine are at relatively high temperature and salinity and highly-evolved meteoric water, developing phyllic zone, the Taegeuk mine containing greater amounts of less-evolved meteoric waters shows relatively low temperature and salinity in ore-forming fluids, developing propylitic zone. The various physicochemical environment for gold-silver mineralization in the Mugeuk mineralized area is due to proximity from heat source area (Mugeuk mine) to marginal area (Taegeuk mine) in a geothermal field. Therefore, it is suggested that the criteria for project exploration in the area are to focus on the area proximal to heat source and phyllic zone.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.31-43
• /
• 1999

This study aims to quantify the distribution characteristics of the fracture system for the numerical modeling of groundwater flow in the north-eastern area of Yosu peninsula. The study area is composed mainly of volcanic rocks and granite. The regional and site scale lineament in the range of magnitude Order 1 to Order 3 were analyzed from the geologic map, air-photograph and shaded relief map. The geometric parameter of Order 4 fracture system was acquired from the scanline survey on the ground surface. There is a similar trend in the preferred orientation between the regional lineament and the Order 4 fracture system except the Set 4 of Order 4 fracture system which is not prominent in the type. That is classified to three fracture sat of high dip angle and one of ow dip angle. From the lineament trend. The orientation of Order 4 fracture system has similar characteristics in each rock termination mode analysis, it is considered that the fracture system was developed systematically and sequentially from Set 1 to Set 4 Filling materials are distinct relatively in low dip angle set. The fracture spacing follows to lognoral distribution and the fracture frequency corrected by the modified Terzaghi correction ranges from 0.38 to 1.01 per mater in each fracture set. The fracture trace lenght also follows to lognormal distribution and ranges from 2.9m to 3.7m in each fracture set.

• Journal of Conservation Science
• /
• v.23
• /
• pp.1-10
• /
• 2008

Consolidants based on tetraethoxysilane (TEOS) such as alkoxysilanes have been widely used for the consolidation of decaying stone heritages. Low-viscosity alkoxysilanes penetrate inside the decaying stone and polymerize within the porous structure of the decaying stone, significantly increasing the cohesion of the material. However, TEOS-based consolidants suffer from practical drawbacks, such as crack formation of the gel during the drying phase due to the developed capillary force, which is typical for TEOS-based consolidants. We prepared new consolidants TEOS-based consolidants containing flexible (3-glycidoxypropyl)trimethoxysilane (GPTMS) and silica nanoparticles (or polyhedral oligomeric silsesquioxanes (POSS)) in order to reduce capillary force development during gel drying. Since the consolidants should have a good interaction with the component of the stone in order to connect the isolate grains of decaying stone, the adhesion interaction of the developed consolidants on the surface of the granite was macroscopically investigated by the ISO 2409 cross cutting test. The adhesion interaction decreased with the addition of silica nanoparticle and POSS while it increased with the addition of GPTMS in TEOS solution.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.1-15
• /
• 2008

The Cretaceous Gajok gold-silver deposit within porphyry granite is located nearby the Cretaceous Pungam basin at the northeastern area in Republic of Korea. The Gajok gold-silver deposit is distinctively composed of a multiple-complex hydrothermal veins with comb, crustiform chalcedony quartz and vug textures, implying it was formed relatively shallower depth. The hypogene open-space filling veins could be divided into 5 paragenetic sequences, increasing tendency of Ag-rich electrum and Ag-phases with increasing paragenetic time. Electrum with high gold contents (${\sim}50$ atomic % Au) as well as sphalerite with high FeS contents (${\sim}6$ mole % FeS) are representative ore minerals in the middle stage. The late stage is characterized by silver-phase such like native silver and/or argentite, coexisting with Ag-rich electrum ($10{\sim}30$ atomic % Au) and Fe-poor sphalerite (< 1 mole % FeS). The ore-forming fluids evolution started at relatively high temperature and salinity (${\sim}360^{\circ}C$, ${\sim}7\;wt.%$ eq. NaCl) and were evolved by dilution and mixing mechanisms on the basis of fluid inclusion study. The gold-silver mineralization proceeded from ore-forming fluids containing greater amounts of less-evolved meteoric waters(${\delta}^{18}O$; $-0.6{\sim}-6.7\;%o$). These results imply that gold-silver mineralization of the Cretaceous Gaiok deposit formed at shallow-crustal level and could be categorized into low-sulfidation epithermal type, related to Cretaceous igneous activity.

• Journal of the Mineralogical Society of Korea
• /
• v.1 no.2
• /
• pp.83-93
• /
• 1988

Amethysts in Eonyang Granite of Woolju-Kun, Kyungnam Province are frequently parallelly grown on top of preexisting smoky quartz crystallized on milky and colorless quartz crystals, which, as a whole, resemble "mushroom" in outer appearance. Fluid inclusions in the amethysts may be grouped into (1) gaseous inclusions (G>L), (2) liquid inclusions (L>G), (3) $L_{CO_2}$-bearing inclusions (L+G+$L_{CO_2}$), (4) halite-bearing inclusions (L+G+halite), (5) multiphase inclusions (L+G+halite+sylvite${\pm}$opaque mineral). In addition, euhedral K-feldspars and acicular hematite crystals are included in colorless-milky quartz and deep purple-red quartz, respectively. Filling temperatures of each type of fluid inclusions were measured as follows: $320{\sim}560^{\circ}C$ for gaseous inclusions; $100{\sim}290^{\circ}C$ for liquid inclusions; $200{\sim}310^{\circ}C$ for $L_{CO_2}$-bearing inclusions; $300{\sim}430^{\circ}C$ for halite-bearing inclusions; and $370{\sim}430^{\circ}C$ for polyphase inclusions. The finished-gem amethysts from Eonyang may be distinguished from Brazilian amethysts by the difference in filling degree of gaseous inclusions by the presence of hematite aciculae, and of $L_{CO_2}$-bearing inclusions, and also by the absence of Zebra-striation structure. They may also be differentiated from synthetic amethysts by presence of straight color banding, solid inclusions, and $L_{CO_2}$-bearing inclusions which are not found in synthetic materials.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.193-201
• /
• 2011

The Geopung Cu deposit consists of two subparallel quartz veins that till the NE-trending fissures in Triassic Cheongsan granite. The quartz veins occur mainly massive with partially cavity and breccia. They can be followed along strike for about 500 m and varies in thickness from 0.2 to 2.2 m. Based on the mineralogy and paragenesis of veins, mineralization of quartz veins can be divided into hypogene and supergene stages. Hypogene stage is associated with hydrothermal alteration minerals such as sericite, pyrite, quartz, chlorite, clay minerals and sulfides such as pyrite, arsenopyrite, pyrrhotite, marcasite, sphalerite, stannite, chalcopyrite and galena. Supergene stage is composed of geothite. Fluid inclusion data from quartz indicate that homogenization temperatures and salinity of hypogene stage range from 163 to $356^{\circ}C$ and from 0.2 to 7.2 wt.% eq. NaCl, respectively. They suggest that ore forming fluids were progressively cooled and diluted from mixing with meteoric water. Sulfur (${\delta}^{34}S$: 4.3~9.2‰) isotope composition indicates that ore sulfur was derived from mainly magmatic source although there is a partial derivation from the host rocks. The calculated oxygen (${\delta}^{18}O$: 0.9~4.0‰) and hydrogen (${\delta}D$: -86~-69‰) isotope compositions suggest that magmatic and meteoric ore fluids were equally important for the formation of the Geopung Cu deposit and then overlapped to some degree with another type of meteoric water during mineralization.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.73-80
• /
• 2011

This study was conducted to elucidate the best cutting condition in propagation of Juniperus chinensis var. sargentii in respect of survival rate, rooting rate, and early growth after cutting via process of cutting time, cutting media, cutting type and growth regulators. As for cutting time, rooting rate was 68.3% on April, which was higher than 39.5% on May and 32.5% on June. The best cutting media was stream sand of rooting rate 72.7%. Those of mixed soil and decomposition were 40.1% and 27.5% each. The effect of growth regulators was different according to the kind of cutting media. There was no effect on stream sand media which showed the highest rooting rate, while it was very effective on the media of decomposition of granite, which rooting rate showed the lowest. Hardwood as cutting materials showed somewhat higher survival and rooting rate compared to semi-hardwood. The cutting with hardwood condition to stream sand on April, it is regarded to be the most effective condition for Juniperus chinensis var. sargentii to increase survival and rooting rate. Therefore in this experiment it is considered that the best season cutting is April, and the most useful media and plant materials stream sand, and hardwood respectively.