• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.78-82
• /
• 2014

Power Transformers with more than one secondary winding are not uncommon in industrial applications. But new classes of applications where very large number of independent secondaries are used are becoming popular in controlled converters for medium and high voltage applications. Cascade H-bridge medium voltage drives and Pulse Step Modulation (PSM) based high voltage power supplies are such applications. Regulated high voltage power supplies (Fig. 1) with 35-100 kV, 5-10 MW output range with very fast dynamics (${\mu}S$ order) uses such transformers. Such power supplies are widely used in fusion research. Here series connection of isolated voltage sources with conventional switching semiconductor devices is achieved by large number of separate transformers or by single unit of multi-secondary transformer. Naturally, a transformer having numbers of secondary windings (~40) on single core is the preferred solution due to space and cost considerations. For design and simulation analysis of such a power supply, the model of a multi-secondary transformer poses special problem to any circuit analysis software as many simulation softwares provide transformer models with limited number (3-6) of secondary windings. Multi-Secondary transformer models with 3 different schemes are available. A comparison of test results from a practical Multi-secondary transformer with a simulation model using magnetic component is found to describe the behavior closer to observed test results. Earlier models assumed magnetising inductance in a linear loss less core model although in actual it is saturable core made-up of CRGO steel laminations. This article discusses a more detailed representation of flux coupled magnetic model with saturable core properties to simulate actual transformers very close to its observed parameters in test and actual usage.

• 품질경영학회지
• /
• 제31권4호
• /
• pp.184-193
• /
• 2003

PL has been developed centering around England and America. Recently many countries are introducing PL system changing the world a single economic bloc based on the rapid development of Technology and Economy. This paper is studied with related literatures and theses, organizational consulting cases within the framework of the firm as the central operating bodies of PL system. In the past, Some papers about System Integration which was operated as a same Certificate System and enacted in a single organization, was studied and presented. But most of papers was a theoretical study related model and conception. In this situation Government supports PSMS of a single system at government expense to 100­200 companies for improving organizational confrontation ability of PL this year. This paper proposed a design and effect of Integration system model based on the analysis of ISO 9001：2000, KS, PSMS and ISO 14001. The integrated system has the following three distinctions. Firstly, KS is a national establishment, national leading certification and forcing standard. Secondly, ISO 9001：2000 and ISO 14001 are an international organization's establishment, non­official certification and optional standard. Finally, PSMS isn't a national law and forcing matter. And it isn't the concept of certification but the operational system by itself. Also if a lawsuit by defect is happened, it is very dangerous. This paper, which is integrated by four management systems and has many consulting cases, is the first in this department and is different from others. Also If people has the basic knowledge about management system, they can directly connect it to the organizational system according to this paper's guidance. It is very good result in this study because the law of PL is executed now.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.437-441
• /
• 2001

This paper describes the construction of a circular polariscope. Generally, a circular polariscope contains four optical elements and a light source. The first element following the light source is called the polarizer. It converts the ordinary light into plane-polarized light. The second element is a quarter wave plate which converts the plane-polarized light into circularly polarized light. Following the quarter wave plate, a specimen made of transparent photoelastic material is located in a loading device. The second quarter wave plate is set and the last element is the analyzer. These polarizing elements, two quarter wave plates and two polarizing filters, were purchased from the USA. Frames and other structures for holding polarizing filters were machined and assembled to be rotated. Light box, which include four incandescent lamps and two sodium-vapor lamps, was made. In order to proof the function of the newly built polariscope, Tardy compensation test was applied to a rectangular shaped specimen made of poly-carbonate material (PSM1). The error of the fringe constant, which was measured by the newly built polariscope, was within 4.4 percent compared to the standard value of this material. It is possible to make a good quality of polariscope if accurate polarizing filters will be used.

• 아태비즈니스연구
• /
• 제14권4호
• /
• pp.191-204
• /
• 2023

Purpose - The purpose of this study was to analyse the relationship between R&D tax support policy and firm innovation activity using data on firms engaged in 12 national strategic technology sectors. Design/methodology/approach - This study collected survey data from 664 companies engaged in national strategic technologies. The data were then analysed using the Propensity Score Matching (PSM) analysis. Findings - First, corporate R&D tax support had a statistically significant positive (+) relationship with firm innovation performance. Second, there was a statistically significant positive (+) relationship with incremental innovation, but there was no statistical significance with radical innovation. Third, there was a statistically significant positive (+) relationship with the firm's first innovation, but there was no statistical significance with the world's first innovation. Fourth, there was a statistically significant positive (+) relationship with the number of R&D projects of a firm. Finally, there was a statistically significant positive (+) relationship with a firm's open innovation. Research implications or Originality - First, in terms of policy effectiveness, the government needs to consider promoting R&D tax support policies in areas where R&D competition is fierce. For private companies engaged in the 12 national strategic technology fields, the R&D tax support policy is working in the direction of promoting corporate innovation activities, and this positive policy effect is likely to be effective in areas where R&D competition is fierce. Second, if the government wants to improve the quality of corporate innovation activities through R&D tax support policies, it needs to provide incentives higher than the current level.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권3호
• /
• pp.15-26
• /
• 2010

The contaminated soils near abandoned mine area can threaten human's health and natural ecosystems through multiple pathways. Remediation of contaminated soil using physicochemical technologies are expensive and destructive of soil environments. On the other hand, environmentally friendly approach that maximize biological remediation, that is, phytoremediation, attracts attention as a low carbon green growth technology. This research is a field demonstration study, focused on the enhanced phytoremediation by bioaugmenting PGPR(Plant Growth Promoting Rhizobacteria)that is helpful on the growth of and heavy metal removal by Echinochloa frumentacea, at a Zn contaminated paddy soil near SamBo mine at Hwasung, Kyunggi. The results showed that the zinc removal by the plant with PSM(Phosphate Solubilizing Bacteria), a kind of PGPR, was three times higher than that by the control. The results are valuable as it is a result from the field-scale technology demonstration. The results also implies that application of PGPR can enhance heavy metal removal from contaminated soil in full scale phytoremediation using Echinochloa frumentacea.

• 대한기계학회논문집A
• /
• 제38권1호
• /
• pp.65-70
• /
• 2014

본 연구는 외경부에 단이 존재하는 제품의 링롤링작업을 위한 예비성형체의 설계에 관한 연구이다. 형상링롤링 공정에서 가장 일반적으로 나타나는 결함 중 하나는 미충진이며, 변형량이 적을 경우나 외경부 단의 깊이가 클 경우 발생한다. 이러한 미충진을 방지하기 위해서는 변형량을 증가시키거나 예비성형체를 최종형상에 근접하도록 설계하여야 한다. 결함이 없는 제품을 생산하기 위하여 형상비와 성형비를 이용한 충진한계식을 제안하였다. 충진한계식은 네가지 경우에 대하여 유한요소해석과 시험생산한 결과를 토대로 작성되었다. 실물 크기의 형상링롤링 작업을 수행하고 충진한계식을 이용한 예측과 비교함으로써 제안된 방법의 타당성을 검증하였다.

• 대한전자공학회논문지SD
• /
• 제47권2호
• /
• pp.68-76
• /
• 2010

최근 터치스크린 기술은 인간이 컴퓨터와 대화할 수 있는 주요 도구로서 급진적인 발전을 이루고 있다. 이 사용자 친화적인 인터페이스는 휴대폰에 이어 데스크탑, TV와 같은 대형스크린 시장까지 확산되어가고 있지만 기존의 저항막방식, 정전용량방식, 초음파방식 등은 기술 및 비용문제로 인하여 중 대형스크린에 적용하기 힘들다. 따라서 본 논문에서는 적외선과 라인스캔 이미지센서를 이용하여 간단하고 저렴한 비용으로 중 대형스크린에 적용할 수 있는 광학 영상 터치스크린 솔루션을 소개하고 이 기술이 갖는 문제점과 해결방안을 제시한다. 멀티 포인트를 추출하기 위한 주요 알고리즘은 범용프로세서를 이용하여 구현 시 약 34ms(29fps)가 소요되었으며 이는 휴먼인터페이스 디바이스로 사용되기에는 불충분하였다. 이를 해결하기 위하여 본 논문에서는 신호처리 및 좌표추출연산을 위한 하드웨어를 설계하여 성능을 향상시키고 광학 영상 터치스크린이 갖는 문제점을 소프트웨어에서 효율적으로 처리할 수 있도록 하였다. 설계한 터치스크린 컨트롤러의 PSM(Power Saving Mode)은 1.8Wh의 적외선 소비에너지를 0.0072Wh 까지 개선하였으며 60인치 대형스크린에서 2개의 실제 좌표를 200fps 속도로 연산해낸다.

• 한국통신학회논문지
• /
• 제29권10C호
• /
• pp.1484-1489
• /
• 2004

비디오 프레임의 크기를 축소하거나 확대할 때, 응용에 따라서는 입력 및 출력이 8${\times}$8 블록 DCT 계수들로 구성되도록 할 필요가 있다. 선형 변환이고 유니터리(unitary) 변환의 일종인 DCT에는 행렬 곱셈에 대한 분배 법칙이 성립한다. 이러한 사실을 이용하여 두가드, 묵허지, 박 등은DCT 영역에서 비디오 프레임들의 크기를 축소하는 방법들을 제안하였다. 이러한 방식으로 영상을 축소 후 확대하면 원 영상의 저 주파수 DCT 계수들이 잘 보존된다. 즉, 원 상(축소되기 전의 영상)과 예측된 영상(축소 후 확대된 영상)의 차이를 부호화 해야 되는 경우 부호화 효율이 매우 높아진다. 이러한 것은 스케일러빌러터를 이용한 비디오 부호화에 바람직한 사실이다. 본 논문에서는 이전의 방식들의 연장선 상에서 가로 세로 각각 2:1로 축소하고 다시 2:1로 확대할 때 DCT 블록의 크기를 다양이 하였다. 실험에 의하면 DCT 블록 크기를 크게 할수록 PSNR 값이 커짐을 알 수 있었다. 그러나, 계산상의 복잡도 역시 커질 것으로 예상된다. 본 논문의 실험 결과는 압축 영역 영상 축소 및 확대를 위한 고속 알고리즘 개발에 중요한 데이터가 될 것으로 생각한다.

• 지식경영연구
• /
• 제20권3호
• /
• pp.173-193
• /
• 2019

Reward-based crowdfunding is a funding platform that allows funds to be raised to early operators who have lack of funds, and is seen as an outstanding infrastructure that is going to lead the fourth industrial revolution in that it is a field of realization of new technologies and creative ideas by start-ups. Reward-based crowdfunding has grown in line with the trend of the fourth industrial revolution, and funding success cases are taking place in various industries that culture/art to technology/IT, including as a new means of knowledge management in a rapidly changing industrial environment. The study focused on the fact that consumer's donation purposes may also vary depending on the category of projects classified as reward-based crowdfunding. Because consumer payment decisions and motivation of consumer purchasing behavior are classified according to the purpose of purchase, the previous papers that the goal gradient effect that the main motivation of consumer donation for reward-based crowdfunding introduced vary depending on project category of utilitarian and hedonic. In this study, consumer's daily donation data is collected by Indiegogo which is a leading reward-based crowdfunding company using web-crawling and the model was defined as propensity score matching (PSM) and random effect model. The results showed that the goal gradient effect occurred in utilitarian project category, but no goal gradient effect for the hedonic project category. Furthermore, this paper developed the study of motivation of consumer donation and contributes theoretical foundation by the results consumer donation may vary depending on the project category; also, this paper has implications for an effective marketing strategy depending on the project category leaves real meaning to the projector.

• 중환자간호학회지
• /
• 제16권3호
• /
• pp.24-33
• /
• 2023

Purpose : This study aims to establish an optimal cut-off score on the Braden scale for the assessment of pressure injury to detect pressure injury risks among inpatients in a South Korean tertiary hospital. Methods : This retrospective study used electronic medical records, from January to December 2022. A total of 654 patients were included in the study. Of these, 218 inpatients with pressure injuries and 436 without pressure injuries were classified and analyzed using 1:2 Propensity Score Matching (PSM), and the generalized estimating equation was performed using SPSS Version 26 and the R Machlt package program. Results : The cut-off value on the Braden scale for distinguishing pressure injury was 17 points, and the AUC (area under the ROC curve) was 0.531 (0.484-0.579). The sensitivity was 56.6% (45.5-67.7%) and the specificity was 69.7% (66.0-73.4%). With 17 points, the Braden scale cut-off distinguished those who had pressure injuries from those who did not at the time of admission (p < .03). In the pressure injury group, the Braden score on the day of the pressure injury was 14, with significant results in all subcategories except the moisture category. Conclusion : Our findings revealed that a cut-off value of 17 was optimal for predicting the risk of pressure injuries among tertiary hospital inpatients. Future studies should evaluate the optimal cut-off values in different clinical environments. Additionally, it is necessary to conduct multicenter large sample studies to verify the effectiveness of a 17 value in PI risk assessments.