• 제목/요약/키워드: A-P shear force

검색결과 596건 처리시간 0.022초

무화과 발효물을 급여한 한우고기의 저장기간 중 pH, 육색, 가열감량, 전단력 및 관능평가의 변화 (Changes of pH, Meat Color, Cooking Loss, Shear Force and Sensory Evaluation on Hanwoo Meat Fed with Supplemental Fig Fermentation during Storage Period)

  • 국길;김광현
    • 한국축산식품학회지
    • /
    • 제22권4호
    • /
    • pp.289-293
    • /
    • 2002
  • 본 연구는 무화과 발효액을 비육후기 한우 숫소에 6개월 간 급여하여 생산된 등심육의 저장기간 궁의 pH, 육색, 가열 감량, 전단력 및 관능평가의 변화를 알아보고자 실시하였다. 실험동물은 평균체중 400$\pm$22kg인 한우 숫소 10두를 대조구(0%)와 무화과 급여구(10%)의 2개 처리구로 5두씩 배치하여 6개월간 사육하였다. 저장기간 중 pH 변화는 무화과 급여구가 대조구에 비해 저장 1, 3 및 9일에 높은 경향을 나타냈으며 저장 15 및 21일에는 낮은 경향을 나타냈는데 처리구간에 유의적인 차이는 없었다. 명도와 적색도는 무화과 급여구가 대조구에 비해 저장 1, 3 및 9일에 높은 반면에 저장 15와 21일에는 낮은 경향을 나타냈는데 처리구간에게 유의적인 차이는 없었다. 황색도는 무화과 급여구가 대조구에 비해 저장 1일에 높은 반면에 저장 3, 9, 15 및 21일에는 낮게 나타났으며 처리구간의 유의적인 차이는 없었다. 가열감량은 무화과 급여구가 대조구에 비해 저장 1, 3 및 9일에 낮은 반면에 저장 15와 21일에는 높게 나타났는데 처리구간의 유의적인 차이는 없었다. 전단력은 저장기간 동안 무화과 급여구가 대조구에 비해 낮게 나타났는데 특히 저장 1, 3 및 9일에 유의적인(P<0.05) 차이를 나타냈다. 냄새와 외관은 저장기간 동안 무화과 급여구에서 개선되는 경향이었는데 처리구간의 의적인 차이는 없었다. 맛은 저장기간 동안 무화과 급여구에서 높게 나타났는데 특히 저장 1, 3 및 9일에 유의적인 차이를 나타냈다. 이상의 시험 결과는 무화과 발효물을 급여한 한우 등심육의 저장기간 중 연도와 맛에 개선효과가 있는 것으로 사료된다. 20%를 차지하여 이에 대한 관심이 높아지고 있음을 알 수 있었다. 생명공학에 대한 연구가 20년 평균 6.6%에서 최근 5년 평균 15%로 급속히 증가하는 경향을 나타내었으며, 다음은 잡초에 관한 연구가 20년 평균 2.5%에서 최근 5년간 5.9%로 증가하였다. 수량성 및 사료가치에 관한 연구는 '82~'86 5년 평균 31.3%에서 최근 5년간 7.7%로 급격히 줄어드는 경향을 나타내었고, 방목연구 또한 비슷한 경향을 나타내었다.esveratrol 화합물도 작용하였으리라고 사료되어 이에 대한 확인이 필요하다. 작약씨에 함유된 물질들의 지질대사 개선효과는 이미 보고된 항산화기능과 함께 동맥경화 예방에 유효할 것으로 기대되며 기능성 식품에 활용에 대한 연구가 필요하다lopectin, which playa leading role in protein interaction, with the oxidation of starch.으며 엽산을 공급시킨 군에서는 에탄올 급여군과 pair-fed군 사이에 유의적인 차이가 없었다. 이상의 결과를 통해서 볼 때 에탄올 급여시 혈장 내 콜레스테롤 함량은 엽산 섭취에 의해 증가되었으나 지질과산화물과 항산화 효소 및 항산화 영양소의 변화에 대하여 엽산결핍이 에탄올 섭취에 의해 변화된 항산화계의 손상을 더욱 가중시키는 경향이 있는 것으로 나타났다.한 솔루션을 제공할 수 있다.순환이 뇌대사 및 수술 후 신경학적 결과에 보다 유익한 효과를 제공해 줄 수 있음을 시사하고 있다.3) to alleviate farmers' heat strain, clothing manufacturers must consider not only the improvement

Comparison of Physicochemical Properties between Standard and Sow Pork

  • Kim, Gye-Woong;Kim, Hack-Youn
    • 한국축산식품학회지
    • /
    • 제38권5호
    • /
    • pp.1120-1130
    • /
    • 2018
  • This study was conducted to investigate the dressing percentage and physicochemical characteristics, such as fatty acid composition, water holding capacity (WHC), shear force, meat color, cooking loss, and sensory evaluation, of experimental pork obtained from a total of 12 standard pigs and sows. The water content of tenderloin (73.38%) was the highest in standard pork (p<0.05). A statistically significant difference in crude protein content was shown between standard pork and sow pork (p<0.05). There were significant differences between standard pork and sow pork in shear forces of loin and tenderloin (p<0.01). There was a significant difference in WHC between standard pork and sow pork in loin, tenderloin, and hind legs (p<0.05). The CIE $L^*$ and CIE $b^*$ values of standard loin were significantly higher than those of sow loin (p<0.05). The CIE $a^*$ values of sow loin were significantly higher than those of standard loin (p<0.05). The contents of arachidonic acid for standard pork and sow pork were 0.33% and 0.84%, respectively (p<0.05). However, there was no difference in the total content of unsaturated fatty acid between the two groups. There were no significant differences between standard pork and sow pork after sensory evaluation, except for color and tenderness. The overall acceptability of standard pork was significantly higher than that of sow pork (p<0.05).

Meat Quality and Storage Characteristics Depending on PSE Status of Broiler Breast Meat

  • Chae, H.S.;Singh, N.K.;Yoo, Y.M.;Ahn, C.N.;Jeong, S.G.;Ham, J.S.;Kim, D.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권4호
    • /
    • pp.582-587
    • /
    • 2007
  • The pale, soft, exudative (PSE) syndrome lowers storage quality and consumers acceptability in the particular meat. With the increase in the consumption of parted chickens in Korean meat consumption trade, a parallel increase in the concern over the PSE status of chickens have been noticed. The present study focused on the PSE status of broiler's breast to investigate the effects of different degrees of PSE on its quality and storage characteristics. A total of 46 broiler chickens of 35 days old averaging 1,251-1,350 g were selected for the study. Breast separated and skin was removed. The breast meat was stored at $4^{\circ}C$ for 3 days and were analysed for pH, lightness, yellowness, redness, shear force, water-holding capacity (WHC), cooking loss, Thiobarbituric acid reactive substances (TBARS) and Volatile basic nitrogen (VBN) on day 1 and 3 during the storage. Increase in the degree of broilers breast PSE during storage caused fall in pH and shear force and increase in lightness, cooking loss, TBARS, VBN. Broilers breast PSE status confirms the actual pale soft and exudative nature of meat.

식이섬유 수준이 유색육용계의 육질에 미치는 영향 (Effect of Dietary Fiber Level on Meat Quality in Colored Broiler)

  • 김미숙;문윤희;임사비나;김대진
    • 생명과학회지
    • /
    • 제7권4호
    • /
    • pp.329-335
    • /
    • 1997
  • This study was conducted to investigate the effect of dietary fiber(DF) levels on the meat quality in colored broiler. Colored broiler were fed on containing corn-soy basal diet(DF 5%) and high level(DF 6,7 and 8%) of dietary fiber diets for 7 weeks. Dietary fiber level of diet was make up by adding some alffalfa meal. Colored broiler meats were stored at 3$\circ$ for 24hr after skaughter, and used to analyze physico-chemical properties. Proximate component, pH, shear force value, myofibril fragmentation index, water holding capacity, cooking loss, protein extractability, fatty acid composition, Hunter's L, a value and palatability of cooked meat were not significantly affected by dietary fiber levels, whereas the Hunter's value of meat was significantly affected bty dietary fiber levels for the final period of feeding. Crude protein content, myofibril fragmentation index, water holding capacity, protein extractability and Hunter's b value of breast meat's were higher than thigh meat's, but crude fat content, pH, shear force value, cooking loss, palmitoleic acid, linolenic acid, and Hunter's a value were lower, regardless of dietary fiber level.

  • PDF

Influence of Probiotics-Friendly Pig Production on Meat Quality and Physicochemical Characteristics

  • Chang, Sung Yong;Belal, Shah Ahmed;Kang, Da Rae;Choi, Yang Il;Kim, Young Hoon;Choe, Ho Sung;Heo, Jae Young;Shim, Kawn Seob
    • 한국축산식품학회지
    • /
    • 제38권2호
    • /
    • pp.403-416
    • /
    • 2018
  • In this study, the dietary effects of probiotics with a liquid application system on meat quality and physicochemical characteristics of pigs were evaluated. A total of 80 Landrace${\times}$Yorkshire${\times}$Duroc (LYD) 3-way crossbred pigs (average age $175{\pm}5d$) were assigned to a conventional farm and a probiotics farm equipped with a liquid probiotics application system (40 pigs in each farm). The two treatments were: CON (diet without probiotics) and PRO (diet with probiotics). Dietary probiotics decreased shear force in the longissimus muscle compared to the control group (p<0.05). The treatment diet did not affect backfat thickness, carcass weight, meat color, cooking loss, water holding capacity (WHC), and drip loss. Dietary probiotics significantly reduced ash, salinity, and pH (at 5 and 15 d) (p<0.05). There was no significant effect on thiobarbituric acid reactive substance (TBARS) values. Polyunsaturated fatty acid (PUFA) and omega fatty acids (${\omega}3$ and ${\omega}6$) were significantly (p<0.05) higher in the PRO group, whereas monounsaturated fatty acid (MUFA) was decreased. The free amino acid composition, serine, lysine, histidine, and arginine levels were significantly lower in the PRO than in the control group. The treatment group exhibited higher nucleotide compounds (hypoxanthine, inosine, GMP, IMP) than the controls. Also, levels of ascorbic acid and thiamin were significantly different (p<0.05), while minerals were not significantly different between the groups. In conclusion, feeding of probiotics had effects on shear force, ash, salinity, pH, PUFA, and some amino acids which related to taste and flavor without any negative effects on the pigs' carcass traits.

Application of Gel-based Proteome Analysis Techniques to Studying Post-mortem Proteolysis in Meat

  • Hwang, I.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권9호
    • /
    • pp.1296-1302
    • /
    • 2004
  • This study was conducted to evaluate the possible application of 2 D-SDS-PAGE (2 DE)-based proteome analysis techniques to the assessment of extreme proteolysis in postmortem skeletal muscle. Eight Hanwoo longissimus muscles were incubated immediately after slaughter for 24 h at 5$^{\circ}C$, 15$^{\circ}C$ or 36$^{\circ}C$. Warner Bratzler (WB)-shear force and ultrastructural configuration were determined at 24 h, and rate of proteolysis to 24 h was determined by 1 D-SDS-PAGE (1 DE) and 2 DE. In addition, tentative protein identification was performed from peptide mass fingerprints of MALDI-ToF analysis of major protein groups on 2 DE profiles. The result showed that although ultrastructural configuration was similar between the 5$^{\circ}C$ and 36$^{\circ}C$ treatments, meat at 5$^{\circ}C$ had higher WBshear force (approximately 5 kg greater). A higher rate of protein degradation at 36$^{\circ}C$ was observed based on Troponin-T degradation, 1 DE, and 2 DE analysis. This indicates that proteolysis during the early postmortem period was a significant determinant of shear force at 24 h. Little difference in proteolysis between 5$^{\circ}C$ and 15$^{\circ}C$ treatments was found based on classic 1 DE profile assessment. Meanwhile, considerable differences in the 2 DE profiles between the two treatments were revealed, with substantially higher rate of proteolysis at 15$^{\circ}C$ compared to 5$^{\circ}C$. Nuclease treatment improved 2 DE profile resolution. 400 ${\mu}$g and 600 ${\mu}$g of sample loading appeared to be appropriate for 24 cm pH 3-10 and pH 5-7 IPG strips, respectively. Protein detection and quantification of the 5$^{\circ}C$, 15$^{\circ}C$ and 36$^{\circ}C$ 2 DE profiles revealed 78, 163 and 232 protein spots respectively that were differentially modified in terms of their electrophoretic properties between approximately pI 5.3-7.7 with the molecular weight range of approximately 71-12 kDa. The current results demonstrated that 2 DE was a superior tool to 1 DE for characterising proteolysis in postmortem skeletal muscle.

Shear bond strength of a new self-adhering flowable composite resin for lithium disilicate-reinforced CAD/CAM ceramic material

  • Erdemir, Ugur;Sancakli, Hande Sar;Sancakli, Erkan;Eren, Meltem Mert;Ozel, Sevda;Yucel, Taner;Yildiz, Esra
    • The Journal of Advanced Prosthodontics
    • /
    • 제6권6호
    • /
    • pp.434-443
    • /
    • 2014
  • PURPOSE. The purpose of this study was to evaluate and compare the effects of different surface pretreatment techniques on the surface roughness and shear bond strength of a new self-adhering flowable composite resin for use with lithium disilicate-reinforced CAD/CAM ceramic material. MATERIALS AND METHODS. A total of one hundred thirty lithium disilicate CAD/CAM ceramic plates with dimensions of $6mm{\times}4mm$ and 3 mm thick were prepared. Specimens were then assigned into five groups (n=26) as follows: untreated control, coating with $30{\mu}m$ silica oxide particles ($Cojet^{TM}$ Sand), 9.6% hydrofluoric acid etching, Er:YAG laser irradiation, and grinding with a high-speed fine diamond bur. A self-adhering flowable composite resin (Vertise Flow) was applied onto the pre-treated ceramic plates using the Ultradent shear bond Teflon mold system. Surface roughness was measured by atomic force microscopy. Shear bond strength test were performed using a universal testing machine at a crosshead speed of 1 mm/min. Surface roughness data were analyzed by one-way ANOVA and the Tukey HSD tests. Shear bond strength test values were analyzed by Kruskal-Wallis and Mann-Whitney U tests at ${\alpha}=.05$. RESULTS. Hydrofluoric acid etching and grinding with high-speed fine diamond bur produced significantly higher surface roughness than the other pretreatment groups (P<.05). Hydrofluoric acid etching and silica coating yielded the highest shear bond strength values (P<.001). CONCLUSION. Self-adhering flowable composite resin used as repair composite resin exhibited very low bond strength irrespective of the surface pretreatments used.

New twelve node serendipity quadrilateral plate bending element based on Mindlin-Reissner theory using Integrated Force Method

  • Dhananjaya, H.R.;Nagabhushanam, J.;Pandey, P.C.;Jumaat, Mohd. Zamin
    • Structural Engineering and Mechanics
    • /
    • 제36권5호
    • /
    • pp.625-642
    • /
    • 2010
  • The Integrated Force Method (IFM) is a novel matrix formulation developed for analyzing the civil, mechanical and aerospace engineering structures. In this method all independent/internal forces are treated as unknown variables which are calculated by simultaneously imposing equations of equilibrium and compatibility conditions. This paper presents a new 12-node serendipity quadrilateral plate bending element MQP12 for the analysis of thin and thick plate problems using IFM. The Mindlin-Reissner plate theory has been employed in the formulation which accounts the effect of shear deformation. The performance of this new element with respect to accuracy and convergence is studied by analyzing many standard benchmark plate bending problems. The results of the new element MQP12 are compared with those of displacement-based 12-node plate bending elements available in the literature. The results are also compared with exact solutions. The new element MQP12 is free from shear locking and performs excellent for both thin and moderately thick plate bending situations.

노계 분쇄 가슴육의 첨가가 크래미의 저장 중 품질변화에 미치는 영향 (Effects of Spent Layer Crushed Breast Addition on the Quality of the Cremi during Storage)

  • 진상근;박재홍;신대근
    • 한국축산식품학회지
    • /
    • 제33권2호
    • /
    • pp.251-257
    • /
    • 2013
  • 수리미에 대한 노계 분쇄 가슴육으로의 대체가 저장 중 크래미의 품질에 미치는 영향을 조사하기 위하여 소시지 제조에 이용되는 커터를 활용하여 노계 가슴육을 분쇄하였으며, 이후 수리미를 노계 분쇄육으로 5(05CM)와 10%(10CM) 대체하며 크래미를 제조하였다. 크래미의 제조 후 모든 크래미는 $10{\pm}1^{\circ}C$에서 3주간 저장하며 실험하였다. 크래미의 수분함량은 두 처리구 모두에서 저장기간이 지남에 따라 유의적으로 감소하였으나, 대조구보다는 높은 수분함량을 나타내었다(p<0.05). 더욱이, 지방의 산화를 나타내는 TBARS는 분쇄육으로 수리미를 5%까지 대체한 05CM보다는 10%까지 대체한 10CM에서 더욱 감소하였다. 크래미 시료의 육색을 나타내는 CIE $b^*$$a^*$는 수리미를 5와 10%까지 분쇄육으로 대체한다면 황색도는 증가하나 적색도는 유의적으로 감소하였다(p<0.05). 크래미의 전 단가와 겔 특성 중 파괴강도와 젤리강도는 저장기간 보다는 분쇄육으로의 대체에 따라 유의적으로 감소하였으나 이러한 결과가 훈련된 관능검사 요원의 관능적 평가에는 영향을 미치지 않았다. 본 실험을 통하여 크래미 제조를 위한 수리미를 노계 분쇄 가슴육으로 10%까지 대체한다 하여도 수치적으로는 조직적인 특성에 영향을 미칠 수 있다 할 수 있겠으나 그 영향은 관능적 평가에 의해 유의적인 차이를 나타낼만한 것은 아니었다. 따라서 크래미 제조를 위한 수리미 10%의 노계 분쇄 가슴육 대체는 경제적인 측면에서도 고려 가능한 대체방법인 것으로 판단된다.

Pumpkin Seed Oil as a Partial Animal Fat Replacer in Bologna-type Sausages

  • Uzlasir, Turkan;Aktas, Nesimi;Gercekaslan, Kamil Emre
    • 한국축산식품학회지
    • /
    • 제40권4호
    • /
    • pp.551-562
    • /
    • 2020
  • Beef fat was replaced with cold press pumpkin seed oil (PSO; 0%, 5%, 15%, and 20%) in the production of bologna-type sausages. A value of pH, water-holding capacity (WHC), jelly-fat separation, emulsion stability and viscosity values were determined in meat batters. Thiobarbituric acid reactive substances (TBARS), color, and textural characteristics (TPA, shear test, penetration test) were determined in end-product at 1, 7, 14, 21, and 28 days of storage at 4℃. The pH values were varied between 6.06 and 6.08. With the increase in the level of PSO in meat batters, there was a significant increase in WHC, jelly-fat separation and viscosity values (p<0.05) while a significant decrease in emulsion stability (p<0.05). TBARS values of sausages were found to be significantly higher than in the control group (p<0.05), and this trend continued during storage. Increasing of PSO level were caused a significant increase in L* and b* values while a decrease in a* value (p<0.05). Hardness, adhesiveness and chewiness values were significantly reduced whereas cohesiveness and resilience values increased (p<0.05). Maximum shear force and work of shear was significantly decreased as the level of PSO increased (p<0.05). Hardness, work of penetration and the resistance during the withdrawal of the probe values (penetration tests) increased significantly with the increase in the level of PSO (p<0.05). These results indicate that PSO has potential to be use as a replacement of animal-based fats in the production of bologna-type sausages.