• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.142-146
• /
• 2005

Standards are increasing of importance for photovoltaics. The rapid growth of production is one reason for this but standards are equally important in ensuring the quality and reliability of installed PV systems. which have a propound impact on acceptance of the technology in the expanding marketplace. Korea government (Korean Agency for Technology and Standards. KATS)make and implement a five year plans for promotion of international standardization of this field from 2004. Through these works and harmonization of PV Korea standards with international standards(international electrotechnical commission. IEC). KATS leads the technology innovations and eventually increases the international Competitiveness. Strategic collaboration with other countries is also strengthened through Korea's participation in IECEE(IEC system for conformity and certification of electrical equipment) on standards and conformity assessment. One of the major goals of the Plan is to facilitate trade between Korea and its trading partners by emphasizing harmonization of its national conformity assessment system with international norms

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.8
• /
• pp.56-64
• /
• 2012

This paper proposes a novel maximum power point tracking (MPPT) control algorithm considering radiation to improve efficiency of PV system. The proposed algorithm is composed perturb and observe (PO) method and constant voltage (CV) method. PO method is simple to realize and CV method is possible to tracking MPP with low radiation. Response characteristics of proposed algorithm are compared to conventional MPPT algorithm such as PO method, IC method and CV method with radiation variation. This paper proves the validity of proposed algorithm through the analysis results.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.3
• /
• pp.47-52
• /
• 2005

Normally if sunlight is directed on a solar cell without any increasing in temperature, the amount of absorption energy per unit area of each cell is increasing. In a silicon solar cell. however, cell conversion efficiency decreases with the increase of temperature. Therefore, to maintain cell conversion efficiency under normal condition, it is necessary to keep the cell at operating temperature. We tried to design and make new hybrid panel with cooling system to prevent increasing of temperature on cell, collect and use thermal energy more effectively. We compared performance of this new hybrid panel with current thermal panel. We also evaluated conversion efficiency, thermal capacity and confirmed cooling effects from thermal absorption efficiency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.12
• /
• pp.1209-1215
• /
• 2009

This paper discusses a common message protocol for green power systems such as tidal, wind, photovoltaic, and solar systems. For this investigations and analysis, existing protocols such as ELCOM-90, TASE.1, ICCP/TASE.2 and SCADA were analyzed for the application of green power systems in view of real-time property and reliability. For the analysis, the practical example of green power system using SACADA and ICCP are investigated and discussed. As a future direction of this investigations, the feasibility analysis of manufacturing message specification(ISO-9560) for green power system is discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2385-2390
• /
• 2009

Based on the detailed analysis of output characteristics of PV array and residential load usage pattern, a design method to calculate optimal battery capacity for stand-alone PV generation systems is proposed. And also, according to power flow Actual irradiation and temperature data are analyzed to compose a PV array simulator and also six representative home appliances are electrically modeled for load simulator, along with 24hours usage pattern. The surplus and insufficient power can be calculated from the proposed simulation platform, so that selection of an optimal battery capacity can be possible. The theoretical analysis and design process will be explained, along with informative simulation results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.127-128
• /
• 2012

Exhaustion of fossil fuels and continued high oil prices, global warming, climate change and to respond to the development and use of alternative energy technologies is expanding rapidly throughout the world. Recently, character of domestic building is appearing by along with economic growth, high-rise, large size, congestion. For this reason, the amount of electrical energy used in a building is increasing. In this study, the applicability of PV modules that are used as roofing and efficiency analysis, and more from the building of BIPV modules built using the activation of alternative energy sources in Korea are aimed want done.

• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.4
• /
• pp.57-64
• /
• 2008

This paper presents the real condition and problems of rural communities, shift of social paradigm, and also discussed the results and efforts of existing energy supporting policy by literature review. The aim of this study is to suggest the new supporting policy of energy saving facilities for rural communities, and to show its necessity, framework, promotion method, and connection plan with existing policy. Based on this study, mainly three results can be drawn as follows; first, this new policy is required that not only suggestive reason such as energy crisis and social atmosphere, but also, financial support and welfare service for resident of rural area. Second, the various rural facilities including residence must be planed sustainable energy saving system by this new policy. And the third, this policy should be simultaneously adopted with rural development policy, and must drive forward that is closely connected with a related policy.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.228-230
• /
• 2009

Nowadays, the LCL-filter type becomes an attractive grid interfacing for grid-connected Voltage Source Inverter (VSI). LCL-filter can render the current harmonics attenuation around the switching frequency by using smaller inductance than L-filter. This paper presents a study about the LCL-filter design for single-phase grid-connected inverter in Photovoltaic (PV) system. According to the expected current ripple, the inductances of the filter can be determined. Based on the absorbed reactive power on capacitor, the capacitance can be calculated. Due to the theoretical analysis, a LCL-filter based single phase grid connected inverter control system are simulated. The studied simulation results are given to validate the theoretical analysis.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.69-73
• /
• 2002

A study on photovoltaic system has a lot of problems. Such as repetition experiment in the same condition, development of MPPT(Maximum Power Point Tracking) algorithm, development of islanding detection algorithm and so forth. The reason Is that solar cell output characteristics are varied by insolarion and surface temperature of solar cell. Therefore, the assistance equipment is required which emulates the solar cell characteristics. In this paper, propose the new modeling of solar cell and verify this modeling using MATLAB simulation. And experiment virtual implement of solar cell system using this modeling.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.340-342
• /
• 2005

태양광 발전 시스템은 신재생에너지의 한 분야로서 이동형 전원부터 대용량 발전 시스템까지 다양한 분야에 적용되고 있다. 본 논문에서는 응용분야의 하나인 정원 보안등에 관한 것이다. 기존 정원 보안등은 전원으로 소형 전지를 내장하여 구동하는 방식과 일반 상용전원을 연결하여 구동하는 방식이 대표적이었다. 본 논문에서는 태양전지를 정원 보안등에 적용하여 내부 충전지를 충전 구동하는 방식을 택하였다. 반사갓의 구형과 신형, 외부요건 변화에 따른 출력의 특성을 비친 분석 모니터링 하였다.