• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.696-703
• /
• 2003

A photovoltaic power generation system is an infinite and clean energy system. Recently. because of the realization of high efficiency and low cost PV modules, the studies on the PV system have extensively increased. In this paper. we present an online scheme for parameter estimation of solar cell, based on the model adjustment technique and a real-coded genetic algorithm(RCGA). The ideal diode model and the diode model with series and shunt resistors are used to estimate their parameters, Simulation works using field data in the form of a V-I characteristic curve are carried out to demonstrate the effectiveness of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.956-957
• /
• 2015

This paper analyzes a operating characteristic for maximum power point tracking (MPPT) of photovoltaic generation system. MPPT methods are used to maximize PV array output power by tracking maximum power point(MPP) continuously. To increase the output efficiency of PV system, it is important to have more efficient MPPT. MPPT algorithm is widely used the control method such as the perturbation and observation(PO) method, incremental conductance(IC) method and constant voltage(CV) method. In case of the radiation is changed, this paper proposes a response characteristic with MPPT control algorithms. Also, it proposes the direct for a novel MPPT control algorithm development through the analyzed data, hereby proves the effectiveness of this paper.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.727-729
• /
• 2005

Solar cell converts sunlight into the electricity that one of the most versatile forms of energy. It has been developed and applied on residental electric power system by urbanized countries as a alternative energy source to overcome energy problem after oil shock. This paper summarizes the results of these efforts by offering a snapshot of the configuration of photovoltaic in residential applications. The status of PV system components and inter -connection and safety equipment will be summarized. Hence this paper discusses only points that might be useful for application.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.77-83
• /
• 2005

The verified thermal efficiency, thermal capacity confirmed the effects of the cooling system. Therefore, it is useful for preventing the PV cell temperature rising when solar radiation accumulates in summer. When adopting a hybrid panel for the BIPV system, the affected areas include the vertical outside walls facing the south, southeast, and southwest on the curtain walls excluding windows. The standards on replace aluminum panel which were the popular exterior material were investigated, Designing practice made sure that it could be manufactured in various sizes, and confirmed the most proper method to install a hybrid panel in the BIPV system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1051_1052
• /
• 2009

This paper deals with operational characteristic analysis of a single-phase PCS (Power Conditioning System) for PV (Photovoltaic) power generation system with AF (Active Filter) function. The theory of dq transformation has been applied to the control strategy of a single-phase PV power generation system to implement the AF function. Application of the virtual two-phase using phase-shift makes it possible to use the dq theory for the single-phase PV power generation system. The authors are sure that the proposed system is a very useful to compensate harmonics caused by nonlinear loads in a single-phase utility system. In this paper, not only a theoretical aspect of the single-phase PV-AF system is discussed, but also the DSP (Digital Signal Processor) based experiment results are presented to demonstrate the effectiveness of the single-phase PV-AF system.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.201-208
• /
• 2017

최근, 전 세계적으로 신 재생에너지에 대한 관심이 증가됨에 따라 친환경적이고 무한한 태양에너지를 이용하는 태양광 발전의 설치가 매년 급증하고 있다. 그러나, 태양광발전시스템은 일반적으로 태양광 전지에서 발생한 에너지로부터 전력변환장치(DC/AC)를 거쳐 계통연계 지점까지 약 25[%]의 전력손실을 발생시키고 있다. 이 전력손실 가운데, 일부 태양광 모듈에 음영이나 환경변화(일사량, 온도, 습도 등)로 인해 스트링의 출력 전압이 인버터의 동작전압보다 낮아지면 해당 스트링이 동작하지 않아 전체의 발전효율이 감소하거나, 최악의 경우 인버터가 탈락되어 계통의 출력 전력이 저하되는 등의 손실이 큰 부분을 차지하고 있다. 따라서, 본 논문에서는 상기의 문제점을 개선하기 위하여, 각각의 스트링별로 DC/DC 전압 레귤레이터를 도입하여 환경변화에 따른 전압 저하로 발생하는 스트링의 탈락을 방지하는 제어방식을 제시하였고, 기존 인버터의 MPPT(P&O) 제어와 정전압 제어기능을 전압 레귤레이터에서 수행하는 방식을 채택하였다. 또한, 제안한 알고리즘을 바탕으로 2kW급의 전압 레귤레이터를 구현하여 기존의 운용방식과 비교, 분석한 결과, 환경변화에 따른 다양한 시나리오에서 제안한 운용방식의 운용효율이 크게 향상됨을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.409-413
• /
• 2006

This paper deals with the design and testing of a simulator system for microgrids with distributed generations. This system is composed of a Real Time Digital Simulator (RTDS) and a power amplifier. The RTDS parts are operated for real time simulation for the microgrid model and the distributed generation source model. The power amplifiers are operated fur amplification of the RTDS's simulated output signal, which is a node voltage of the microgrid and distributed generation source. In this paper, we represent an RTDS system design, specification and test results of a power amplifier and simulation results of a PV (Photovoltaic) system and wind turbine system. The proposed system is applicable for development and performance testing of a PCS (Power Conversion System) for renewable energy sources.

• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.1-10
• /
• 2012

A photovoltaic/thermal (PVT)solar system is the solar technology that allows for simultaneous conversion of solar energy into both electricity and heat. This paper compared the performance of PVT system with a conventional PV module and solar collector and analyzed electrical and thermal efficiency of PVT system in terms of solar irradiance and inlet temperature of the working fluid. Based on the experimental data, thermal and electrical efficiencies of he glazed PVT system were57.9% and14.27% under zero reduced temperature condition which were lower by 13.6% than the solar thermal absorber plate and by 0.08% than the PV module respectively. For the unglazed PVT system it had lower thermal efficiency than the solar thermal absorber plate but higher electrical performance than the PV module due to the cooling effect by the working fluid. However, total efficiency of the glazed PVT system was72.2% which was higher than combined efficiencies of the solar collector and PV module. Besides, total efficiency of the PVT system would be much higher if calculated based on unit area.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.60-67
• /
• 2011

A photovoltaic/thermal(PVT)solar system is the solar technology that allows for simultaneous conversion of solar energy into both electricity and heat. This paper compared the performance of PVT system with a conventional PV module and solar collector and analyzed electrical and thermal efficiency of PVT system in terms of solar irradiance and inlet temperature of the working fluid. Based on the experimental data, thermal and electrical efficiencies of the glazed PVT system were 57.9% and 14.27% under zero reduced temperature condition which were lower by 13.6% than the solar thermal absorber plate and by 0.08% than the PV module respectively. For the unglazed PVT system, it had lower thermal efficiency than the solar thermal absorber plate but higher electrical performance than the PV module due to the cooling effect by the working fluid. However, total efficiency of the glazed PVT system was 72.2% which was higher than combined efficiencies of the solar collector and PV module. Besides, total efficiency of the PVT system would be much higher if calculated based on unit area.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.504-506
• /
• 2022

기존의 루프탑 태양광 발전 시스템들은 안전성 문제와 더불어 시스템상의 오류 때문에 주로 고정형 시스템 개발 초점이 맞추어져 있었다. 이에 기존 고정식 루프탑 태양광 발전 기술에 태양광 추적 시스템과 모니터링 시스템을 추가하여 루프탑 설치형 스마트 태양광 발전 시스템을 개발하고자 한다. 이는 태양광 추적시스템 접목, 안전진단 및 대처시스템 접목, 이상진단 및 알람 시스템 접목, 외부기기 제어 및 모니터링 시스템 접목으로 "루프탑 설치형 스마트 태양광 발전시스템" 개발 및 사업화에 활용 계획이다.