• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.411-418
• /
• 2004

Using a level set method we develop a shape optimization method applied to energy flow problems in steady state. The boundaries are implicitly represented by the level set function obtainable from the 'Hamilton-Jacobi type' equation with the 'Up-wind scheme.' The developed method defines a Lagrangian function for the constrained optimization. It minimizes a generalized compliance, satisfying the constraint of allowable volume through the variations of implicit boundary. During the optimization, the boundary velocity to integrate the Hamilton-Jacobi equation is obtained from the optimality condition for the Lagrangian function. Compared with the established topology optimization method, the developed one has no numerical instability such as checkerboard problems and easy representation of topological shape variations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.653-654
• /
• 2008

This paper presents a topological shape optimization for electromagnetic system using a level set method. The optimization is progressed by updating the implicit level set function from the Hamilton-Jacobi equation. The up-wind scheme is used for numerical implementation of the Hamilton-Jacobi equation. In order to validate the proposed optimization, the core part of a C-core actuator is optimized by three cases using different materials; (single steel), (two steels), and (steel and magnet).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.23-25
• /
• 2008

This paper presents a topological shape optimization for electromagnetic system using a Level Set method. The optimization is progressed by updating the implicit Level Set function from the Hamilton-Jacobi equation. The up-wind scheme is used for numerical implementation of the Hamilton-Jacobi equation. In order to validate the proposed optimization, the core part of a C-core actuator is optimized by three cases using different materials; (single steel), (two steels), and (steel and magnet).

• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1389-1410
• /
• 2016

This paper proposes a hybrid of topological derivative-based level set method (LSM) and isogeometric analysis (IGA) for structural topology optimization. In topology optimization a significant drawback of the conventional LSM is that it cannot create new holes in the design domain. In this study, the topological derivative approach is used to create new holes in appropriate places of the design domain, and alleviate the strong dependency of the optimal topology on the initial design. Furthermore, the values of the gradient vector in Hamilton-Jacobi equation in the conventional LSM are replaced with a Delta function. In the topology optimization procedure IGA based on Non-Uniform Rational B-Spline (NURBS) functions is utilized to overcome the drawbacks in the conventional finite element method (FEM) based topology optimization approaches. Several numerical examples are provided to confirm the computational efficiency and robustness of the proposed method in comparison with derivative-based LSM and FEM.

• 대한기계학회논문집B
• /
• 제41권11호
• /
• pp.759-765
• /
• 2017

본 연구에서는 유한요소 최소자승법에 기반한 level-set 방정식의 이류방정식과 재초기화 방정식의 이산화기법을 3차원 슬로싱 문제에 적용한 코드를 개발하고, 그 성능을 평가한다. 사용된 수치기법은 정렬 격자계를 이용하여 다양한 표준 예제들에 대하여 검증이 수행되었다. 제안된 방법은 상대적으로 성긴 격자계에서 다른 기법들에 비하여 개선된 해를 줌을 확인하였다. 두 가지의 격자계에 대하여 수행한 3차원 슬로싱 해석은 상당히 성긴 격자계에서도 압력의 시간 이력이 실험결과와 잘 일치함을 보여주며, 조밀한 격자계에서는 최대압력의 크기가 크게 예측이 됨을 확인하였다. 한편, 본 연구에서 개발한 기법은 유한요소법의 특성에 의해서 비정렬 격자계를 이용하여 복잡한 형상을 가지는 용기 내의 슬로싱 문제의 해석으로 바로 확장할 수 있다.

• 한국전산유체공학회지
• /
• 제7권4호
• /
• pp.28-34
• /
• 2002

A general purpose program for computing 3-D flows has been extended for two-phase flows with topologically complex interfaces. The 3-D interfaces are tracked by employing a coupled level set and volume-of-fluid (CLSVOF) method which not only can calculate an interfacial curvature accurately but also can achieve mass conservation well. The program has been tested through the computations of bubbles rising in a liquid. The numerical results are found to compare well with the results reported in the literature.

• 한국전산구조공학회논문집
• /
• 제25권6호
• /
• pp.549-558
• /
• 2012

본 논문에서는 레벨셋 방법을 이용하여, 소음을 차단하기 위한 음향 구조물의 형상 최적설계를 수행하였다. 형상 최적설계의 목적은 특정한 각도와 각속도로 입사되는 입사파에 대해서 음향 투과율(acoustic transmittance)이 최소가 되도록 음향 결정의 형상(inclusion shape)을 결정하는 것이다. 음향 결정 구조에서는 음향이 흩어져 있는 결정 구조에 의해서 굴절되기 때문에 결정 모양을 조정함으로써, 음향 거동을 제어할 수 있다. 본 연구에서는 음향 구조물로 결정이 수평방향으로는 주기적으로 무한히 분포하고 수직방향으로는 유한한 층간 구조를 가지고 있는 소음 방어벽(Noise barrier)을 고려한다. 주기적 구조물을 고려하기 때문에 결정의 좌와 우에 Bloch 이론을 적용해 주기적 경계조건을 부과하였고, 소음 방어벽 위와 아래에는 임피던스 행렬(impedance matrix)를 이용하여, 무한 균질 영역과 소음 방어벽 사이의 음파 투과를 모사하였다. 결정의 위상과 형상변화를 묘사하기 위해서 레벨셋 방법(level set method)을 사용하였다. 레벨셋 방법에서는 초기 영역을 고정시킨 상태에서, 레벨셋으로 표현되는 임시적 경계(implicit moving boundary)를 변화시킴으로써 복잡한 형상을 다룰 수 있다. 몇몇 수치적 예제를 통해, 제시된 방법의 적용성을 검증하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.391-396
• /
• 2008

A level set based topological shape optimization using extended B-spline basis functions is developed for steady state heat conduction problems. The only inside of complicated domain is identified by the level set functions and taken into account in computation. The solution of Hamilton-Jacobi equation leads to an optimal shape according to the normal velocity field determined from the sensitivity analysis, minimizing a thermal compliance while satisfying a volume constraint. To obtain exact shape sensitivity, the precise normal and curvature of geometry need to be determined using the level set and B-spline basis functions. The nucleation of holes is possible whenever and wherever necessary during the optimization using a topological derivative concept.

• Structural Engineering and Mechanics
• /
• 제87권3호
• /
• pp.243-254
• /
• 2023

Engineering structures usually suffer from cracks. The crack geometry has an influence on the structural mechanical properties and subsequent crack propagations. However, as an extensively utilized method in fracture analysis, the extended finite element method provided by Abaqus fails to output the specific location and dimensions of fractures. In this study, a technique to capture the crack geometry is proposed. The technique is based on the invariant level set method (I-LSM), which can avoid updating the level set function during crack development. The solution is achieved by an open-source plug-in programmed by Python. Three examples were performed to verify the effectiveness and robustness of the program. The result shows that the developed program can accurately output the crack geometry in both the 2D and 3D models. The open-source plug-in codes are included as supplementary material.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.67.2-67.2
• /
• 2005