• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1089-1095
• /
• 2011

열전달 향상을 위한 방법으로 많이 사용되고 있는 마이크로 핀을 포함한 표면 위에서의 핵비등을 액상과 기상에서 질량 및 운동량, 에너지에 대한 지배 방정식을 풀어 수치해석을 수행하였다. 핵비등에서의 기포거동을 계산하기 위해 sharp-interface 레벨셋(level-set) 방법을 상변화 효과와 핀과 캐비티와 같은 잠긴 고체에서의 점착 조건 및 접촉각, 마이크로 액체층에서의 증발 열유속을 포함하도록 수정하였다. 핀과 캐비티를 포함한 표면에서의 기포 생성, 성장, 이탈에 대한 해석을 통하여 핀-캐비티 배열, 핀-핀 간격이 핵비등에서의 기포거동에 중요한 역할을 하는 것을 확인하였다.

• 품질경영학회지
• /
• 제23권3호
• /
• pp.156-166
• /
• 1995

Job shop scheduling problem is a complex system and an NP-hard problem. Thus it is natural to look for heuristic method. We consider the multi-part production scheduling problem for quality level in a job shop scheduling under the existence of alternative routings. The problem is more complex if the processing time is imprecision. It requires suitable method to deal with imprecision. Fuzzy set theory can be useful in modeling and solving scheduling problems with uncertain processing times. Li-Lee fuzzy number comparison method will be used to compare processing times that evaluated under fuzziness. This study presents heuristic method for quality level in bottleneck-based job shop scheduling under fuzzy environment. On the basis of the proposed method, an example is presented.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권12호
• /
• pp.865-872
• /
• 2013

Two-level 형태소 분석 방법은 규칙 기반 방법 중 하나로 형태소의 변화 현상을 규칙으로 처리하고, 기본 어휘 사전을 기반으로 형태소 결합관계를 분석한다. 이는 언어에 독립적인 방법으로 한국어에 대해서도 일부 구축되어 적용됨이 증명되었다. 그러나 기존 한국어에 대한 Two-level 형태소 분석기는 사전을 수동으로 구축하여 규모가 매우 작고 실제 사용에 제한적이었으며, 과분석이 많아 효율성이 매우 떨어졌다. 본 논문은 세종 품사부착 말뭉치에서 대규모의 Two-level 어휘 사전을 자동으로 구축하여 형태소 분석기의 적용 범위를 넓히고, 형태소간의 결합관계를 어휘 정보와 어휘 형태에 따른 하위품사 정보를 이용하여 분석함으로써 형태소 분석기의 성능을 향상시킬 수 있는 방법을 제시한다. 실험 결과, 기존의 방법보다 형태소 분석기의 과분석을 68% 이상 줄여 f-measure를 25.5% point 이상 향상시킬 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.808-813
• /
• 2011

There are hundreds of thousands call center workers wearing acoustic device. However, researches and noise exposure measurements on the noise transmitted from acoustic devices have seldom been performed due to the difficulty of measurement and to the absence of the measuring method in Korea. The aim of this study is to set up management measures to protect hearing loss on the call operator by acquiring measurement data of noise transmitted from the headset Noise exposure measurements of 17 operators were performed in 7 call centers and Head and Torso Simulator method in compliance with the ISO Standard 11904-2 was used for the measurement of noise transmitted from the headset Sound pressure levels(SPL) transmitted from the headset were 73.2~86 dB(A). The operator exposed to the highest SPL set up his volume control at 9 which was the highest volume level. The volume control level, adjustable from 1 to 9, could be identified 12 out of 17 operators and the range of volume levels was 4.5~9. As a result of Pearson Correlation Analysis, the correlation between volume level and SPL transmitted from the headset showed high relation as significance at the 0.672 level(p<0.05). To protect hearing loss of call center operators, it is more practical and effective measure to limit the volume level below the noise exposure level, i.e. 85 dB(A), rather than to carry out noise monitoring considering cost-effective aspect.

• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.615-621
• /
• 2011

There are hundreds of thousands call center workers wearing acoustic device. However, researches and noise exposure measurements on the noise transmitted from acoustic devices have seldom been performed due to the difficulty of measurement and to the absence of the measuring method in Korea. The aim of this study is to set up management measures to protect hearing loss on the call operator by acquiring measurement data of noise transmitted from the headset. Noise exposure measurements of 17 operators were performed in 7 call centers and head and Torso simulator method in compliance with the ISO standard 11904-2 was used for the measurement of noise transmitted from the headset. Sound pressure levels(SPL) transmitted from the headset were 73.2~86 dB(A). The operator exposed to the highest SPL set up his volume control at 9 which was the highest volume level. The volume control level, adjustable from 1 to 9, could be identified 12 out of 17 operators and the range of volume levels was 4.5~9. As a result of pearson correlation analysis, the correlation between volume level and SPL transmitted from the headset showed high relation as significance at the 0.672 level(p<0.05). To protect hearing loss of call center operators, it is more practical and effective measure to limit the volume level below the noise exposure level, i.e. 85 dB(A), rather than to carry out noise monitoring considering cost-effective aspect.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권1호
• /
• pp.52-57
• /
• 2003

In this paper, we propose a Fuzzy Classifier System(FCS) to find a set of fuzzy rules which can carry out the edge detection. The classifier system of Holland can evaluate the usefulness of rules represented by classifiers with repeated learning. FCS makes the classifier system be able to carry out the mapping from continuous inputs to outputs. It is the FCS that applies the method of machine learning to the concept of fuzzy logic. It is that the antecedent and consequent of classifier is same as a fuzzy rule. In this paper, the FCS is the Michigan style. A single fuzzy if-then rule is coded as an individual. The average gray levels which each group of neighbor pixels has are represented into fuzzy set. Then a pixel is decided whether it is edge pixel or not using fuzzy if-then rules. Depending on the average of gray levels, a number of fuzzy rules can be activated, and each rules makes the output. These outputs are aggregated and defuzzified to take new gray value of the pixel. To evaluate this edge detection, we will compare the new gray level of a pixel with gray level obtained by the other edge detection method such as Sobel edge detection. This comparison provides a reinforcement signal for FCS which is reinforcement learning. Also the FCS employs the Genetic Algorithms to make new rules and modify rules when performance of the system needs to be improved.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.37-47
• /
• 1999

본 논문에서는 접수(water entry) 및 이수(water exit) 문제를 유동장의 지배방정식인 2차원 비압축성 Navier-Stokes방정식을 일반좌표계(generalized coordinate system)에서 유한체적법(Finite Volume Method)으로 이산화 하여 해석하였다. 강체의 접수 또는 이수 상황에서 발생하는 자유수면 변형에 대한 처리는 Level-Set[11]기법을 사용하였다. 수치계산결과에서 접수에 대한 유체충격력에 대한 계산결과는 쐐기(wedge)형과 flared-ship 단면의 실험결과[5]와 비교하였으며, 원형실린더의 이수문제에서는 시간에 따른 자유수면의 변형 및 유동장의 특징을 살펴보았다.

• 한국해양공학회지
• /
• 제33권3호
• /
• pp.280-288
• /
• 2019

A submerged breakwater is one of the coastal structures used to reduce wave energy and coastal erosion. However, a submerged breakwater has a negative aspect in that a strong rip current occurring around an open inlet due to a difference in mean water levels at the front and rear sides of the structure leads to scouring. Such scouring has a bad effect on its stability. In order to eliminate this kind of demerit, this study investigated an artificial reef of the overflow type with openings. We also developed a program where the flows around the artificial reef of the overflow type could be analyzed numerically. An unstructured grid system was used to cover the various geometries, and the level set method was applied to treat the movement of the free surface. To verify these numerical schemes, hydraulic physical tests were performed on the submerged breakwater and double breaking type artificial reef. Then, the wave height and velocity distribution around the reef were examined using the experimental results. Comparisons between the results of hydraulic and numerical tests showed reasonable agreement.

• 대한전자공학회논문지SD
• /
• 제47권5호
• /
• pp.80-86
• /
• 2010

전형적인 버스 시스템 구조는 공용버스 내에 여러 개의 마스터와 슬레이브, 아비터 그리고 디코더 등으로 구성되어 있다. 복수의 마스터가 동시간대에 버스를 이용할 수 없으므로, 아비터는 이를 중재하는 역할을 수행한다. 아비터가 어떠한 중재방식 을 선택하는가에 따라 버스 사용의 효율성이 결정된다. 기존의 중재 방식에는 Fixed Priority 방식, Round-Robin 방식, TDMA 방식, Lottery 방식 등이 연구되고 있는데, 버스 우선권이 주로 고려되어 있다. 본 논문에서는 마스터별 버스 점유율을 연산하는 블록을 이용하는 버스중재 방식을 제안하고, TLM(Transaction Level Model)을 통해 다른 중재 방식과 비교하여 성능을 검증하였다. 성능분석 결과, 기존의 Fixed Priority 방식과 Round-Robin 방식은 버스점유율을 설정할 수 없었으며 기존의 TDMA, Lottery 중재방식의 경우에는 100,000 사이클 이상에서 사용자가 설정한 버스점유율과 비교하여 각각 최대 50%, 70%의 오차가 발생하였다. 반면에 점유율 고려 중재방식의 경우에는 약 1000 사이클 이후부터 사용자가 설정한 버스점유율과 비교하여 1% 이하의 오차를 유지하였다.

• 한국인쇄학회지
• /
• 제15권1호
• /
• pp.41-55
• /
• 1997

We examine various digital halftoning technique and their application to printings. Three such technique are the error diffusion, cluster dither and disperse dither method. This paper describes a new tone correction halftone method to compensate dot gain. Input digital level are transformed by tone correction characteristics. The function of tone correction are solved from the printer response characteristic. The experimental results show that the proposed method is useful and valid.