• Progress in Superconductivity and Cryogenics
• /
• v.16 no.4
• /
• pp.71-77
• /
• 2014

For a long-term space mission, filling process of cryogenic liquid propellant is operated on a space vehicle in space. A vent process during transfer and filling of cryogenic propellant is needed to maintain the fuel tank pressure at a safe level due to its volatile characteristic. It is possible that both liquid and vapor phases of the cryogenic propellant are released simultaneously to outer space when the vent process occurs under low gravity environment. As a result, the existing filling process with venting not only accompanies wasting liquid propellant, but also consumes extra fuel to compensate for the unexpected momentum originated from the vent process. No-Vent Fill (NVF) method, a filling procedure without a venting process of cryogenic liquid propellant, is an attractive technology to perform a long-term space mission. In this paper, the preliminary experimental results of the NVF process are described. The experimental set-up consists of a 9-liter cryogenic liquid receiver tank and a supply tank. Liquid nitrogen ($LN_2$) is used to simulate the behavior of cryogenic propellant. The whole situation in the receiver tank during NVF is monitored. The major experimental parameter in the experiment is the mass flow rate of the liquid nitrogen. The experimental results demonstrate that as the mass flow rate is increased, NVF process is conducted successfully. The quality and the inlet temperature of the injected $LN_2$ are affected by the mass flow rate. These parameters determine success of NVF.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.2
• /
• pp.73-83
• /
• 2022

Purpose : Low back pain (LBP) is reported as a risk of experiencing musculoskeletal disorders due to muscle stiffness and hypokinetics. The lumbar spine in an unstable state causes imbalance and lumbar instability. Therefore, This study examined the effects of lumbar stabilization exercise and self-complex exercise program on pain, function, psychosocial level, static balance ability, and transverse abdominal muscle (TrA) thickness and contraction ratio in patients with lumbar instability. Methods : The design of this is a randomized controlled trial (RCT). Twenty-six LBP patients participated in this study. Screening tests were performed and assigned to the experimental group (n=13) and control group (n=13) using a random allocation program. Both groups underwent a lumbar stabilization exercise program. In addition, the experimental group implemented the self-complex exercise program. All interventions were applied three times per week for four weeks. The quadruple visual analog (QVAS), the Korean version of the Oswestry disability index (K-ODI), Korean version of fear-avoidance belief questionnaire (FABQ), static balance ability, TrA thickness, and contraction ratio were compared to evaluate the effect on intervention. Statistical significance was set at 𝛼=.05. Results : Both groups showed significant differences before and after the intervention in QVAS, K-ODI, FABQ, static balance ability, and TrA thickness in contraction (p<.05). In addition, significant differences in K-ODI and FABQ were observed between the experimental group and control group (p<.05). Conclusion : A lumbar stabilization exercise and self-complex exercise program resulted in reduced dysfunctions, psychosocial stability in patients with lumbar instability. Therefore, Lumbar stabilization exercise and self-complex exercise program for patients with lumbar instability are effective method with clinical significance in improving the function and psychosocial stability.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.151-171
• /
• 2014

Firms today have sought management effectiveness and efficiency utilizing information technologies (IT). Numerous firms are outsourcing specific information systems functions to cope with their short of information resources or IT experts, or to reduce their capital cost. Recently, Software-as-a-Service (SaaS) as a new type of information system has become one of the powerful outsourcing alternatives. SaaS is software deployed as a hosted and accessed over the internet. It is regarded as the idea of on-demand, pay-per-use, and utility computing and is now being applied to support the core competencies of clients in areas ranging from the individual productivity area to the vertical industry and e-commerce area. In this study, therefore, we seek to quantify the value that SaaS has on business performance by examining the relationships among firm strategies, SaaS technology maturity, and business performance of SaaS providers. We begin by drawing from prior literature on SaaS, technology maturity and firm strategy. SaaS technology maturity is classified into three different phases such as application service providing (ASP), Web-native application, and Web-service application. Firm strategies are manipulated by the low-cost strategy and differentiation strategy. Finally, we considered customer acquisition as a business performance. In this sense, specific objectives of this study are as follows. First, we examine the relationships between customer acquisition performance and both low-cost strategy and differentiation strategy of SaaS providers. Secondly, we investigate the mediating and moderating effects of SaaS technology maturity on those relationships. For this purpose, study collects data from the SaaS providers, and their line of applications registered in the database in CNK (Commerce net Korea) in Korea using a questionnaire method by the professional research institution. The unit of analysis in this study is the SBUs (strategic business unit) in the software provider. A total of 199 SBUs is used for analyzing and testing our hypotheses. With regards to the measurement of firm strategy, we take three measurement items for differentiation strategy such as the application uniqueness (referring an application aims to differentiate within just one or a small number of target industry), supply channel diversification (regarding whether SaaS vendor had diversified supply chain) as well as the number of specialized expertise and take two items for low cost strategy like subscription fee and initial set-up fee. We employ a hierarchical regression analysis technique for testing moderation effects of SaaS technology maturity and follow the Baron and Kenny's procedure for determining if firm strategies affect customer acquisition through technology maturity. Empirical results revealed that, firstly, when differentiation strategy is applied to attain business performance like customer acquisition, the effects of the strategy is moderated by the technology maturity level of SaaS providers. In other words, securing higher level of SaaS technology maturity is essential for higher business performance. For instance, given that firms implement application uniqueness or a distribution channel diversification as a differentiation strategy, they can acquire more customers when their level of SaaS technology maturity is higher rather than lower. Secondly, results indicate that pursuing differentiation strategy or low cost strategy effectively works for SaaS providers' obtaining customer, which means that continuously differentiating their service from others or making their service fee (subscription fee or initial set-up fee) lower are helpful for their business success in terms of acquiring their customers. Lastly, results show that the level of SaaS technology maturity mediates the relationships between low cost strategy and customer acquisition. That is, based on our research design, customers usually perceive the real value of the low subscription fee or initial set-up fee only through the SaaS service provide by vender and, in turn, this will affect their decision making whether subscribe or not.

• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.705-709
• /
• 2017

The electronic and optical characteristics of molybdenum disulphide ($MoS_2$) film significantly vary with its thickness, and thus a rapid and accurate estimation of the number of $MoS_2$ layers is critical in practical applications as well as in basic researches. Various existing methods are currently available for the thickness measurement, but each has drawbacks. Transmission electron microscopy allows actual counting of the $MoS_2$ layers, but is very complicated and requires destructive processing of the sample to the point where it will no longer be useable after characterization. Atomic force microscopy, particularly when operated in the tapping mode, is likewise time-consuming and suffers from certain anomalies caused by an improperly chosen set point, that is, free amplitude in air for the cantilever. Raman spectroscopy is a quick characterization method for identifying one to a few layers, but the laser irradiation causes structural degradation of the $MoS_2$. Optical microscopy works only when $MoS_2$ is on a silicon substrate covered with $SiO_2$ of 100~300 nm thickness. The last two optical methods are commonly limited in resolution to the micrometer range due to the diffraction limits of light. We report here a method of measuring the distribution of the number of $MoS_2$ layers using a low voltage field emission electron microscope with acceleration voltages no greater than 1 kV. We found a linear relationship between the FESEM contrast and the number of $MoS_2$ layers. This method can be used to characterize $MoS_2$ samples at nanometer-level spatial resolution, which is below the limits of other methods.

• Journal of the Korean Society of Costume
• /
• v.63 no.8
• /
• pp.14-26
• /
• 2013

The purpose of this study is to compare and analyze Jacqueline Kennedy and Michelle Obama's fashion style from a perspective of modernism and postmodernism. The method utilized in this study was first, to examine the properties of modernism and postmodernism. Next, we explored the types of role performance of the first ladies and the application of their fashion as an aid to their roles through the precedents of the research concerning modernism and postmodernism. The results of the study are as follows. First, there was a trend of formalism and anti-formalism. Jacqueline Kennedy made her public appearances wearing a formal dress in order to express the first lady's authoritarian figure of restrained elegance. The fashion of the first lady aspired to formalism. Meanwhile, Michelle Obama followed more of a free style by eschewing the typical formality of the first lady. She created diverse styles utilizing a variety of items, which were not interrupted by form or by using heterogeneous items. Second, there is a trend of elitism and populism. While Jacqueline Kennedy preferred only haute couture designers' costume in order to show the prestige and dignity of the upper class, Michelle Obama patronized unknown designers' clothing or mid-level casual brand goods that the public favors in order to interact with the public through her fashion. Third, while modernism regards totality or unity to be important, postmodernism puts an emphasis on the eclecticism by pursuing complexity and diversity through the deconstruction of an indigenous genre. In case of Jacqueline Kennedy, this tendency featured monotone clothing color, which presented a unified full set dress that excluded decoration. Michelle Obama, in contrast, mixed and matched formal dresses and a casual cardigan or felicitously mixed luxury brand or low to middle priced brand goods.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.49-59
• /
• 2004

The concectration and distribution of contaminants obtained from a contaminated land investigation or an environmental geochemistry survey constitutes the basis of a decision-making process on environmental policies or of scientific researches. As the quality of data determines the reliability of the result, the investigation plan should be adjusted according to the purpose of the investigation. In general, the effort to improve the data quality had been focused mainly on the QA/QC procedures in laboratories. The rapid progress of analytical instrument has also contributed toward improving the analytical precision to a sacrificable degree. Nevertheless, in many cases, it is not the analytical precision that needs improvement for the better precision of overall measurement process: it is rather during the sampling process in the field that is responsible for the poor precision. To assess the data quality on a measured value, ISO recommends to provide information on "measurement uncertainty" along with the measured value. The measurement uncertainty in an environmental measurement context can be explained as the statistical number that expresses the degree of the uncertainty stemming from the sampling and analytical procedures. There is a cost involved in order to improve the precision of sampling and analytical methods so as to decrease the degree of measurement uncertainty. The economical point of compromise in an investigation planning can be achieved when the allowable degree of uncertainty has been set before-hand. The investigation can then be planned accordingly not to exceed the uncertainty limit. Furthermore, if the measurement uncertainty estimated from the preliminary investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the investigation should be allotted cost-effectively to reinforce the weakest link of the whole investigation process. This paper aims to present a method of estimating the level of measurement uncertainty of a measured contamination concentration at a site used as an example and to show how the estimated uncertainty can be applied to serve the particular purpose of an investigation.

• Journal of the Korean housing association
• /
• v.20 no.4
• /
• pp.79-88
• /
• 2009

A planned access method on constantly-changing-community unit plan changes and develops based on the periodical situation and also plan theory. In this research, it is to present the link between the theory of complex city change and the plan factor of it, and to show how Korean residential complex plan has changed as time passed and how new concept of city plan came up and by applying new methods how can this affect our real world and the past plan. In the phase of analysis, it analyzed the flow of 'community unit plan' and its theory and investigated the factor of compositional space and built a analysis frame. The factors of community unit plan are space structure, size and shape of block, population, distribution of facilities and movement system. It chose the place that can represent the flow of community unit plan trand and that indicates the obvious development leading to Jamsil (1975), Gwa Chun (1980), Mok Dong (1983), Sang Ge (1985), Ilsan (1989), Dong tan (2001) and Eun Jung (2003) total of 7 places. And to compare a similar size of the city, it selected a small community unit. Based on the result of theoretical study and prior research, it can be said that the space composition style has change from a whole complete complex area to a linked-cross over community unit and the access of urban level was on set. Also, a pedestrian walking area was secured and the dense of building structure and pleasant environment wanting need was in balance. For facility plans, the usage of facility and functional change brought change of type, size and disposition. The walking area for pedestrian became a huge matter. Therefore, market, education, public facilities and green system collaborated to co-build a whole community unit and activated the walking environment. Also, public transportation, environment friendly city organization was built.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.3
• /
• pp.125-133
• /
• 2016

Objective: The aim of this study is to figure out the level of Functional Movement Screen (FMS) of 122 automobile manufacturing workers and to set the FMS score for predicting risk of musculoskeletal disorders. Background: Although today's industrial sites have been becoming automated rapidly, the risks of work-related musculoskeletal disorders (WMSDs) have been on the rise. In the case of WMSDs, it is important to control WMSDs at the early stage. Early detection of WMSDs is very important for the successful treatment. However, the medical examination puts a great financial burden on most workers. To reduce their burden, there is one test to check the musculoskeletal functional condition and to predict the risk of injury, which is called FMS. Method: This research tested the FMS score of 122 workers at a motor company, and also conducted a questionnaire survey of individual characteristics and job characteristics. Results: For the 122 subjects, the average score of FMS is $14.63{\pm}2.27$. There is a negative correlation between FMS and their ages and BMI (p <0.05). FMS is higher when exercising regularly (p <0.05). The FMS scores of musculoskeletal disorder patients are lower than those of normal workers (p <0.05). While it is more likely to become a musculoskeletal disorder patient when FMS score is less than 14, it is more likely to become a normal worker when FMS score is more than or equal to 14. Conclusion: According to the result of FMS test, there is a score difference between individuals with musculoskeletal disorders and normal ones. FMS scores can also predict and identify workers with risk of the musculoskeletal disorders. Application: According to this study, FMS can be expected to have a positive effect on the prevention of WMSDs in worksites.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.201-205
• /
• 1997

With the recent advance of Web and its associated technologies, information sharing on distribute computing environments has gained a great amount of attention from many researchers in many application areas, such as medicine, engineering, and business. One basic requirement of distributed medical consultation systems is that geographically dispersed, disparate participants are allowed to exchange information readily with each other. Such software also needs to be supported on a broad range of computer platforms to increase the software's accessibility. In this paper, the development of world-wide-web based medical consultation system or radiology imaging is addressed to provide the platform independence and great accessibility. The system supports sharing of 3-dimensional objects. We use VRML (Virtual Reality Modeling Language), which is the de-facto standard in 3-D modeling on the Web. 3-D objects are reconstructed from CT or MRI volume data using a VRML format, which can be viewed and manipulated easily in Web-browsers with a VRML plug-in. A Marching cubes method is used in the transformation of scanned volume data set to polygonal surfaces of VRML. A decimation algorithm is adopted to reduce the number of meshes in the resulting VRML file. 3-D volume data are often very large-sized, and hence loading the data on PC level computers requires a significant reduction of the size of the data, while minimizing the loss of the original shape information. This is also important to decrease network delays. A prototype system has been implemented (http://netopia.snu.ac.kr/-cyber/). and several sessions of experiments are carried out.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.132-141
• /
• 2013

Robotic Drilling Systems(RDSs) set the standard for the factory automation systems in aerospace manufacturing. With the benefits of cost effective drilling and predictive maintenance, RDSs can provide greater flexibility in the manufacturing process. The system can be easily adopted to manage very complex and time-consuming processes, such as automated fastening hole drilling processes of large aircraft sections, where it would be difficult accomplished by workers following teaching or conventional guided methods. However, in order to build an RDS based on a CAD model, the precise calibration of the Tool Center Point(TCP) must be performed in order to define the relationships between the fastening-hole target and the End Effector(EEF). Based on the kinematics principle, the robot manipulator requires a new method to correct the 3D errors between the CAD model of the reference coordinate system and the actual measurements. The system can be called as a successful system if following conditions can be met; a. seamless integration of the industrial robot controller and the IO Level communication, b. performing pre-defined drilling procedures automatically. This study focuses on implementing a new technology called iGPS into the fastening-hole-drilling process, which is a critical process in aircraft manufacturing. The proposed system exhibits better than 100-micron 3D accuracy under the predefined working space. Based on the proposed EEF fastening-hole machining process, the corresponding processes and programs are developed, and its feasibility is studied.