• Korean Journal of Oriental Medicine
• /
• v.2 no.1
• /
• pp.337-380
• /
• 1996

'Nei Jing(內徑)' first defined the interrelationship of the true and tile false between evil factor affecting health(雅氣) and vital essence energy(精氣). According to 「'Nei Jing(內徑)', the above interrelationship is explained as 'If state of evil domination is considered as sthenia-syndrome(雅氣盛則實), if the consumption of healthy energy Is considered as asenia-syndrome(精氣尊則虛): 'Nei Jing(內徑)', proposed major features of the medicall treatment by 'regluate the vatal energy of asthenia and sthenia, treat the sthenia-syndrome by purgation, and treat the asenia-syndrome by therapy of invigoration(調其氣之虛實, 實則瀉之, 虛則補之): The above interrelationship was interpreted as 'treat the asthenia-syndrome of child organ by invigorating the mother organ(虛者補其母)'in the 69th of 'The Classic on Difficulty',(難經 六十九難). Go-Mu(高武) of Myung-dynasty describe therapy for invigoration and purgation of itself-meridian(自經 補瀉法), which locating acupuncture points according to the Therorr of Five Element in the five shu points of itself-meridian(自經 五유穴), based on the generation in the ${\ulcorner}$A Synthetical Book of Acupuncture and Moxibustion(針灸聚英)${\lrcorner}$, Sae-hyun Jang(張世賢) further extended location acupuncture points of the five shu points to the other-meridian in the ${\ulcorner}$Gyeo Jung Do Ju Nan Gyung(校正圖註難經)${\lrcorner}$ Sa-Ahm's 5 Element Acupuncture Method(舍嚴五行鍼法) was originated in 1644, the middle of the Yi-dynasty. It linked the reinforcing and reducing in acupuncture therapy which incorporated tlle asthenia-syndrome and sthenia-syndrome of the hollow organs, based on principle of the Yin Yang 5 Element Theory(陰陽五行學說), not only to the generation in the 5 element(相生關係) but also to the restriction in the 5 element(相剋關係). Furthermore it was devised for the medical treatment by comning therapy for invigoration and purgation of itself-meridian(自經 補瀉法) with that of the other-meridian. Even though many original forms(正形) of the therapy for invigoration and purgation of the Yin Yang 5 Element Theory comply with the principle of the generation and the restriction based on the principle of the Yin Yang 5 Element Theory are abailable, variational forms(變形) are also recognized by examining the nature of the Sa-Ahm's 5 Element Acupuncture Method(舍嚴五行鍼法), For this reason, it is very difficult to understand the Sa-Ahm's 5 Element Acupuncture Method(舍嚴五行鍼法) thoroughly. therefore, those variational forms are obstacles for the beginners to study the Sa-Ahm's 5 Element Acupuncture Method. In order to understand the principle of the practical clinical application of the Sa-Ahm's 5 Element Acupuncture Method, this study investigated which principle was based on the variations of the locating acupuncture points' method for the acupuncture prescription.

• Journal of Welding and Joining
• /
• v.17 no.5
• /
• pp.55-60
• /
• 1999

In thin plate welding, welding deformation is deformation is produced in special form like buckling distortion, which is different from one in thick plate welding, large quantitatively, and has complicated form. Therefore, a particular countermeasure to prevent the welding deformation in manufacturing process is requested. Otherwise it takes more time to straighten the welding deformation than to fabricated a steel structure newly and in case of failing to straighten the welding deformation in beginning of the flame straightening process, even if the flame straitening is completed, the appearances is not good and sometimes eve refabrication is needed. To minimize these problems. In this present paper, the effects of the condition of support pin on out-of plane deformation produced by thin plate Butt welding in investigated through experiment and the countermeasure to prevent the welding deformation in suggested.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1341-1350
• /
• 1992

This paper addresses the practical problem of finding a useful strain energy function of the incompressible rubberlike materials. It examines methods by which the form of the functions are determined and shows how the selection of experimental data influences the resulting form of the functions. From this information, an optimal choice of the form of energy functions becomes possible. Phenomenological theories used in this paper are limited to elastic, incompressible material models. Due to the nature of the phenomenological methods, these theories are accurate only for the materials treated. However, they serve as a starting basis for the study of more complicated material behaviors.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.761-768
• /
• 2010

When cracks occur in reinforced concrete structures, a steel carries all tensile force at crack section, while the concrete between cracks carries a part of the tensile force due to bond, so that the steel is less elongated. This is called the tension-stiffening effect, that plays an important role in verification of a serviceability limit state. But it is a complicated work to use a complex strain distribution between cracks, therefore an average strain is used to calculate deflection and crack width. In Eurocode 2, tension-stiffening effect expressed in the first order form or the second order form is used in calculating an average curvature for deflection. In this study for a flexural member deflection and crack width are calculated using various models for the tension-stiffening effect and the results are compared with the values of Eurocode 2 and KCI provisions. As results, the predicted values using the second order form are appeared to be well agreed with the experimental values and it could secure more analytical consistency.

• The Journal of Korea Robotics Society
• /
• v.17 no.1
• /
• pp.68-75
• /
• 2022

In this paper, we considered the deformation shape of the soft rotation actuator as a double curvature shell and proceeded with the analytical development. Since the response of the hyperelastic material has a large nonlinear deformation, the analytical approach is very complicated and the solution cannot be easily obtained. it is assumed that the behavior of the flexible body, which is a superelastic material, takes the form of a double curvature shell, and the formulas for calculating the deformation are simplified. In this process, equilibrium equations in the related coordinate system representing a double curvature shell were derived. In addition, assuming a thin shell, the stress component in the thickness direction was ignored, and the equation was developed by adding the assumption of free rotation without load. In order to verify the analytically calculated value in this way, an experiment was conducted and the results were compared.

• Korean Journal of Materials Research
• /
• v.1 no.2
• /
• pp.86-92
• /
• 1991

A potential energy function comprising a two-body potential term which is modified form Morse potential and a three-body potential term which is modified from Axilrod-Teller potential has been developed for small carbon clusters. The structural changes of small carbon clusters $C_2-C_6$ are qualitatively investigated by employing this potential energy function representing the energies of the small carbon cluster isotopes as a function of the three body intensity factor. It is found that the structure of the small carbon cluster changes from open structure to closed one, from complicated structure to simple one, and from three-dimensional structure to two-or-one dimensional one as the degree of the three-body interaction increases.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.35-43
• /
• 2011

The area to be studied is the place where the main line rail way will be constructed in accordance with the scheduled construction project of Yeongju dam, and is a fold and mylonite zone over several km that is formed by ductile-shearing effect. The ductile shear zone, which has been transformed by faulting for long geological time, shows a complicated geological structure. Due to the recrystallization of mineral caused by transformation in deep underground (>8km), a mylonite zone with lamellar structure has properties distinguished from other fault zones formed by transformation near earth surface <2km). To see the properties of mylonite, this study analyzed the transformation rate of sample rocks and the shape of constriction structure accompanied with transformation. While the transformation of fault zone shows a round oblate, the mylonite zone shows a prolate form. Transformation rate in fault zone was measured to be less than 1.2 compared to the state before transformation while the measured rate in mylonite zone was 2.5 at most. Setting the surface of discontinuity as the base, the unconfined compressive strength of slickenside can be categorized in sedimentary rocks, and a change of strength was observed after water soaking over certain time. Taking into account that the weathering resistance of the rock based on mineral and chemical organization is relatively higher, its engineering properties seems to result from the shattered crack structure by crushing effect. When undertaking tunnel construction in mylonite zone, there should be a special care for the expansion of shattered cracks or the fall of strength by influx of ground water.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.112-119
• /
• 2001

In modern manufacturing, many products that have geometrically complicated features, including three-dimensional sculptured surfaces, are being designed and produced to meet various sophisticated functional specifications. The cutting force is required not only for the design of machine and cutting tools, but also for the determination of the cutting conditions for the various machining operations. The ball-end mill is deflected by the cutting force and, the tool deflection is one of the main reasons of the machining errors on a free-form surface. Hence, The cutting force generated in the ball-end milling is the most important property of the machining. The purpose of this study is to find the characteristics of the cutting force in inclined plane and the resultant machining errors in the ball-end milling process. Although the depth of cut is constant in the inclined plane, the cutting force area varies due to the hemisphere of the ball-end mill.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.74-80
• /
• 2008

Spatio-temporal filters are capable of reducing noise from moving pictures, which cannot be dealt with by spatial filters. However, the algorithm is too complicated to be realized as hardware. We implemented a real-time spatio-temporal noise reduction system, using at most three frames, based upon adaptive mean filter algorithm. Some factors which interfere with hardware implementation were modified. Noise estimated from the previous frame was used to filter the current frame so that filtering could be conducted in parallel with noise estimation. This speeds up the system thereby enabling real-time execution. The form of filtering windows was also modified to facilitate synchronization. The proposed structure was implemented on Virtex 4 XC4VLX60, occupying 66% of total slices with 80MHz of the maximum operation frequency.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.60-67
• /
• 2021

In lately, it's been developed and used a system of using deck plates as formwork in order to solve various problems caused by conventional formwork system. This system is more economical and has higher constructability than the conventional system by permanently embedding most of deck plates into the members. However, for this kind of embedded deck plates formwork system, it's been reported that it is difficult to verify filling of concrete in members like beams with narrow width and complicated rebar arrangement. In addtion, there are several problems such as corrosion of deck plates in terms of constructability and maintenance. Therefore, in this study, it is attempted to develop a removal-deck plate formwork system for beams by removing deck plates after concrete curing. The system consists of a deck plate module that acts as form, a frame preventing deformation by concrete lateral pressure, stirrup frame, and connector that combines these. As a result of this research, it is verified that it has higher constructability, efficiently prevents deformation caused by concrete lateral pressure and could be easily removed in the developed formwork system.