Kim, Chi-Hong;Kwon, Soon-Seog;Kim, Young-Kyoon;Kim, Kwan-Hyoung;Moon, Hwa-Sik;Song, Jeong-Sup;Park, Sung-Hak
Tuberculosis and Respiratory Diseases
/
v.40
no.5
/
pp.501-508
/
1993
Background: Sleep apnea syndrome is a common disorder which is estimated to affect about 1~4% of adult male population. And if untreated, sleep apnea can cause significant sequelae, such as hypertension, nocturnal cardiac arrhythmia, daytime hypersomnolence, and cognitive impairment. Various kinds of treatment for obstructive sleep apnea (OSA) have been developed. Among them nasal CPAP, first introduced by Sullivan et al in 1981, has received widespread interest and acclaim as a treatment of OSA, and is currently recommended as first-line treatment for OSA. We evaluated the effect of nasal CPAP in OSA and the side effects of nasal CPAP hindering patients from using nasal CPAP. Methods: We performed sleep studies in 20 OSA patients at 2 consecutive nights; baseline night at first day and CPAP night at second day. We compared apnea index, lowest oxygen concentration during apnea, maximal apnea time, and total apnea duration per total sleep time before and after CPAP. We also evaluated the side effects of CPAP with inquiry to the patients. Results: 1) Apnea index was significantly decreased after CPAP in 17 out of 20 OSA patients (85%) and increased in 3 patients (15%). 2) Average apnea index was significantly decreased after CPAP ($34.1{\pm}18.9/h{\rightarrow}15.4{\pm}10.3/h$, p<0.01). 3) Total apnea duration per total sleep time was also significantly decreased after CPAP ($28.5{\pm}16.0%{\rightarrow}11.9{\pm}9.3%$, p<0.05). 4) The lowest oxygen satuation and maximal apnea time were not significantly changed after CPAP. 5) The most frequent side effect of nasal CPAP was mask discomfort (80%), and the next was drying of nasal passages (65%). Conclusion: Nasal CPAP is an effective treatment for OSA. Futher studies should be concentrated on long term follow up of nasal CPAP for its therapeutic effects and the study of methods to enhance patients' compliance.
By this time, a few of previous studies of factors related to separation from their jobs and job satisfaction only have dealt with the separation rate. the cause of separation and related factors that induce job satisfaction and incentive factors, the actualities of morale some suggestions for reduction of the separation rate. This study is attempted to determine factors that have effect on job satisfaction of national hospital nurses. and to proide information and materials for the development of the administration of nursing through the appreciation of factors influencing on job satisfaction between isolated ward nurses and general ward nurses working at national hospitals. 185 nurses of national hospitals responsed th this study, and were divided into two groups. Group 1: 57 nurses working at isolated wards for tuberculosis patients and Group 2 : 128 nurses at general wards. Relevant data were collected from August, 5, 1992 through August 20, 1992. The questionnaire consisted of 8 genalized items and 4 items concerning job satisfaction. The collected data were processed with SPSS, and the relationship among vaviables was analyzed by means of $X^2-test$, Pearson Correlation, Multiple Regression. The results of this study are as follows: 1. There is no significant difference between two groups in terms of generalized items. Age distributions show $44.3\%$ under the category of less than 34. and $55.7\%$ under the category more than 35, $19.3%$ was single and $74.6\%$ was married respectively. 2. $79.4\%$ of the nurses have the desire to have in-service education under the satisfactory physical environments such as welfare system, accommodating structures and facilities, instruments or management systems of the hospital, but under the category of unsatisfactory circumstances, $60.3\%$ have the intention of having in- service education. The concern in terms of in-service education shows statistically significant difference between two groups $(X^2=8.85,\;p<0. 05)$. This result accepts the hypothesis that good physical environments could intensify interests in service education. 3. The extent of satisfaction related to psychological environments is heightend according to good physical environments. In result, the hypothesis that the extent of satisfaction in terms of physical environments could raise satisfaction about psychological environment is accepted. 4. In the light of the extent of satisfaction about physical environments, $33.3\%$ of isolated ward nurses are satisfied with physical environments, but only $11.7\%$ of general ward nurses are satisfied. $(X^2=10.88,\; p<0.01)$. This result shows that the satisfaction degree about phusicalenvironments of isolated war nurses was higher than that of general ward nurses in spite of high physical and psychological risks due to exposure to infection. Consequently. the hypothesis was rejected that the satisfaction degree about physical environments would be lower in isolated ward nurses than in general ward nurses. 5. The fact that $87.7%$ of isolated ward nurses took interest in service education and $53.19\%$ of general ward nurses took interest in service education demonstrats that isolated ward nurse have more interest in service education than gerneral ward nurses. The result shows that the hypothesis is accepted that isolated ward nurses would have mor interests in service education than general ward nurses. 6. In the extent of satisfaction about physical environments such as morale human relationship promotion, there is no significant difference between two groups in terms of statistics. The hypothesis is rejected that satisfaction about psychologic environments would be high in isolated ward nurses than in general ward nurses. In conclusion. factors influencing on job satisfaction are considered to have effect on. another, and also interdisciplinary amelioration of factors accompanied with systematic inter cooperative investigation is necessary.
This study seeks to clarify the influence of the stage migration which has proceeded through generations, on the population growth of local cities in the case of Jeollabuk-do. For this, setting to baby boomer as parents generation and echo boomer as their children, this study traces each generation's birth, distribution and the process of selective migration using aggregate level data. And the stage migration is analyzed by O-D, divided into three regions in each; Jeollabuk-do rural areas, Jeollabuk-do cities and other provinces. The major findings of this study are as follows. First, it was estimated that the number of the baby boomer births in Jeollabuk-do rural areas was seven times more numerous than in cities. Second, both rural and urban born baby boomers overwhelmingly moved into other provinces, especially Seoul metropolitan area and metropolis in their selective migration processes. However, there was also migration stream from rural areas to cities in Jeollabuk-do and the amount of this stream was approximately equal to the amount of outflux from cities in Jeollabuk-do to other provinces. Third, due to baby boomers' stage migration, from rural to urban, echo boomers were born in cities more than in rural areas. Fourth, urban born echo boomers still have moved into other provinces just like their parents generation in selective migration process. But comparing with baby boomer, the number of echo boomers influx from rural areas to cities has decreased. Consequentially the population of echo boomer in Jeollabuk-do cities also has decreased. Finally, the stage migration has been a basic cause of the social growth of urban population, and also influenced on the natural growth, closely connected with migrants' life course, such as marriage, childbirth and rearing. Therefore, this study concludes that the stage migration through generations is one of the crucial factor to understand the population growth in local cities.
Statement of problem: Repeated delivery and removal of abutment cause some changes such as wear, scratch or defect of hexagonal structure. It may increase the value of rotational freedom(RF) between hexagonal structures. Purpose: The purpose of this study was to evaluate surface changes and rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment after repeated delivery and removal under SEM and toolmaker's microscope. Materials and methods: Implant systems used for this study were 3i and Avana. Seven pail's of implant fixture, abutment and abutment screws for each system were selected and all fixtures were perpendicularly mounted in liquid unsaturated polyesther with dental surveyor. Each one was embedded beneath the platform of fixture. Surfaces of hexagonal structure before repeated closing and opening of abutment were observed using SEM and rotational freedom was measured by using toolmaker's microscope. Each abutment was secured to the implant future by each abutment screw with recommended torque value using a digital torque controller and was repeatedly delivered and removed by 20 times respectively. After experiment, evaluation for the change of hexagonal structures and measurement of rotational freedom were performed. Result : The results were as follows; 1. Wear of contact area between implant fixture and abutment was considerable in both 3i and Avana system. Scratches and defects were frequently observed at the line-angle of hexagonal structures of implant fixture and abutment. 2. In the SEM view of the external hexagon of implant fixture, the point-angle areas at the corner edge of hexagon were severely worn out in both systems. It was more notable in the case of 3i systems than in that of Avana systems. 3. In the SEM view of the internal hexagon of abutment, Gingi-Hue abutment of 3i systems showed severe wear in micro-stop contacts that were machined into the corners to prevent rotation and cemented abutment of Avana systems showed wear in both surface area adjacent to the corner mating with external hexagon of implant fixture. 4 The mean values of rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment were 0.48$\pm$0.04$^{\circ}$ in pre-tested 3i systems and 1.18$\pm$0.25$^{\circ}$ after test, and 1.80$\pm$0.04$^{\circ}$ in pre-tested Avana systems and 2.61$\pm$0.16$^{\circ}$ after test. 5. Changes of rotational freedom after test shouted statistical)y a significant increase in both 3i and Avana systems(P<0.05, paired t-test). 6. Statistically, there was no significant difference between amount of increase in the rotational freedom of 3i systems and amount of increase in that of Avana ones(P>0.05, unpaired t-test). Conclusion: Conclusively, it was considered that repeated delivery and remove of abutment by 20 times would not have influence on screw joint stability. However, it caused statistically the significant change of rotational freedom in tested systems. Therefore, it is suggested that repeated delivery and remove of abutment should be minimal as possible as it could be and be done carefully Additionally, it is suggested that the means or treatment to prevent the wear of mating components should be devised.
Statement of the problem: Under anatomical limitations on maxillary posterior region, a poor crown-to root ratio acting on dental implants can result in undesirable stress in surrounding bone, which in turn can cause bone defects and eventual failure of implants. Purpose: The purpose is to compare stress distribution due to different crown-root ratio and effect of splinting between natural teeth and implants in maxillary molar area under different loads. Material and methods: Analysis of stress arising supporting bone of the natural teeth and the implant was made with 3-dimensional finite element method. The model simulated naturel teeth was made with 2nd premolar and 1st molar in the maxillary molar region (Model T). The model simulated implants placed on same positions with two parallel implants of Straumann Dental Implant cemented abutment (Model I). Each model was designed in different crown-root ratio (0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it non-splinted or splinted. After that, 300 N force was loaded to each model in five ways (Load 1: middle of occlusal table, Load 2: middle of buccal cusp, Load 3: middle of lingual cusp, Load 4: horizontal load to buccal cusp of anterior abutment only, Load 5: horizontal load to middle of buccal cusp of each abutment), and stress distribution was analyzed. Results and conclusion: On all occasions, stress was concentrated at the cervical region of the implant. Under load 1, 2 and 3, stress was not increased even when crown-root ratio increases, but under load 4 and 5, when crown-root ratio increases, stress also increased. There was difference in stress values between natural teeth and implants when crown-root ratio gradually increases; In case of natural teeth, splinting decreased stress under vertical and horizontal loads. In case of implants, splinting decreased stress under vertical loads 1,2 and 3, but increased maximal stress under loads 2 and 3. Under horizontal loads, splinting decreased stress, however the effect of splinting decreased under load 5 than load 4. Furthermore, the stress was increased, when crown-root ratio is 1.25:1. Clinical implications: This limited finite element study suggests that the stress on supporting bone may be increased under non-axial loads and poor crown-root ratio. Under poor crown-root ratio, excessive stress was generated at the cervical region of the implant, and decreased splinting effect for stress distribution, which can be related to clinical failure.
Lee, Yun;Choi, Dae-Gyun;Kwon, Kung-Rock;Lee, Richard Sung-Bok;Noh, Kwan-Tae
Journal of Dental Rehabilitation and Applied Science
/
v.26
no.4
/
pp.405-417
/
2010
Previous studies have already shown that mouthguard is effective in protecting jaw bone, teeth and oral tissue against sports trauma. However, other than severe trauma, repetitive force, such as disorders like clenching, cause teeth or oral tissue damage. These kinds of disorders usually present pathologic attrition in the posterior teeth, resorption in alveolar bone, loss of teeth and destruction of occlusion. Wearing a mouthguard is believed to be effective in preventing these disorders. But its effect is not examined thoroughly enough. The purpose of this study is to identify whether mouthguard is effective in reducing strain caused by clenching. Mandibular first molars in the normal occlusal relationship without any history of dental treatment were chosen. Biaxial type strain gauge was placed on the buccal surface of the tooth. Having maximum occlusal force, measured by load cell, as a standard, clenching intensity were divided into three stages; moment of slightly tooth contact, medium bite force (50% of maximum bite force), maximum bite force. Strain occurring in dentition in each stage with and without mouthguard was measured. Changes in strain (on dentition) between each stage and difference in strain, between with or without mouthguard were recorded by PCD-300 analyzer and PCD-30 soft ware. The data was statistically analyzed by Wilcoxon signed rank test. The following results were drawn; Without mouthguard, strain given on dentition increased as the clenching force increased. With mouthguard, strain given on dentition also increased as the clenching force increased. With mouthguard, strain decreased, in all cases of clenching force stages. Data on the moment of slightly tooth contact stage, had no statistical significance. However, with mouthguard, 50-90% of decrease in strain could be obtained in maximum occlusal force, compared to the group without mouthguard. Mouthguard decreased the strain on the dentition, caused by clenching. Therefore, mouthguard seems to be effective in preventing damage on dentition, by acting against clenching, which occurs both consciously and unconsciously during sports activities.
Kim, Ji-Young;Kim, Kyung-A;Lee, Yeon-Kyung;Ko, Sun-Young;Shin, Son-Moon;Han, Byung-Hee
Neonatal Medicine
/
v.18
no.1
/
pp.117-123
/
2011
Purpose: Congenital intrahepatic portosystemic shunts are rare disease and clinically asymptomatic shunts may be detected by chance on ultrasonogram before and after birth. We studied clinical course, treatment and prognosis of congenital intrahepatic portosystemic shunt at prenatal or neonatal period. Methods: Medical records of 8 patients which were diagnosed in intrahepatic portosystemic shunt in Cheil General Hospital from 2006 through 2010 were reviewed retrospectively. Results: Eight patients with congenital intrahepatic portosystemic shunts were identified. Six patients were diagnosed at prenatal radiological screening, including three cases of intrauterine growth restriction and two cases of preterm baby. One case with increased serum ammonia underwent coil embolization. In four cases including one case that presented elevated direct bilirubin, shunts were closed spontaneously within 11th month after birth. Two patients were diagnosed on abdominal sonogram after birth because of elevated direct hyperbilirubinemia, all of whom presented intrauterine growth restriction. Closure of shunts was confirmed during 4th month to 6th month. Conclusion: Congenital intrahepatic portosystemic shunts are clinically asymptomatic mostly and spontaneous closure is expected within 2 years age. But occasionally they have severe complication, so clinical and radiological observation is needed. Specially in cases of intrauterine growth retardation without evident cause, the possible diagnosis of congenital intrahepatic portosystemic shunts should be considered and prenatal and postnatal examination should be performed. When prenatal diagnosis is made, fetal wellbeing should be monitored periodically until spontaneous closure of shunts.
Purpose : Among perinatal risk factors, neonatal seizures are one of the strongest independent discriminators of adverse outcome, representing high risks of mortality and neurologic morbidity. This study was undertaken to evaluate the neurologic outcome of neonatal status epilepticus according to underlying etiology, seizure pattern, onset time, and duration. Methods : We reviewed retrospectively 36 neonates(19 males, 17 females) with status epilepticus who were admitted to the neonatal intensive care unit, Inha Hospital between July, 1988 and June, 2003. They were evaluated with neurologic examination, laboratory data, EEG findings, and neuroimaging studies etc. Results : The mean gestational period of the patients was $37.0{\pm}3.6$ weeks and birth weight was $2.70{\pm}0.82$ kilogram. Fifty two point eight percent of the neonates were male and 66.7 percent were born at term. The most common cause of neonatal status epilepticus was hypoxic-ischemic encephalopathy. In preterm babies, intracranial hemorrhages showed an especially high frequency(P=0.034). Gestational age and birth weight did not show a correlation with neurologic complications. The incidence of neurological sequelae were significantly related to prolonged seizures lasting more than 1 hour(P=0.002). Neonates with seizures within the first 72 hours tended to be more frequent among those who developed adverse outcomes(P=0.016). Generalized tonic seizures had the worst prognosis, whereas those children who had subtle seizures had better outcomes than any other type(P<0.05). Generalized tonic seizures were primarily represented on EEG by abnormal background, whereas subtle seizure showed a significantly more normal EEG than any other seizures(P<0.05). Conclusion : Our results indicate that neonatal status epilepticus with early onsets, prolonged durations. And generalized tonic types can predict an increased risk for neurologic sequelae. So, those seizures must be perceived as medical emergencies and treated aggressively with antiepileptic drugs.
Objective: The purpose of this study was to evaluate the difference in frictional resistance among metal, ceramic, self-ligation brackets and coated or non-coated Ni-Ti archwires at various bracket-archwire angulations during the sliding movement of an orthodontic archwire, using an orthodontic sliding simulation device. Methods: Four types of bracket (Micro-arch Perpect Clear2 Clippy-C and Damon3 and 5 types of orthodontic archwire (0.014", 0.016", and 0.016" ${\times}$ 0.022" inch coated Ni-Ti, and 0.016" and 0.016" ${\times}$ 0.022" inch Ni-Ti) were used. Further, the bracket- archwire angles were set at 4 different angulations: $0^{\circ}$, $3^{\circ}$, $6^{\circ}$, and $9^{\circ}$. Results: The frictions from all the experimental groups were found to be significantly increased in order of self-ligation brackets, Micro-arch and Perpect Clear2 ($p$ < 0.001). The presence of a coat had no effect on the friction of the same sized archwires at $0^{\circ}$ and $3^{\circ}$ bracket-archwire angles ($p$ < 0.001). Coated archwires had significantly higher frictions than the same sized non-coated archwires at $6^{\circ}$ and $9^{\circ}$ bracket-archwire angles ($p$ < 0.001). The frictions increased significantly as the bracket-archwire angles were increased ($p$ < 0.001). Conclusions: The use of self-ligation brackets will be beneficial in clinical situations where a low frictional force is required. Further, in cases where crowding is not severe, the use of coated archwires should not cause problems. However, more additional explanation is required considering the fact that the damage of coated archwire and exposure of the metal portion in case of binding and notching and the effects of saliva were not taken into account.
Kim, So-Young;Noh, Yong-Ho;Kang, Sung-Gak;Kim, Young-Bum;Jang, Woo-Jin;Kim, Dong-Joon;Yun, Hyun-Shik
KSBB Journal
/
v.22
no.3
/
pp.162-167
/
2007
Ammonia gas is one of the major pollutants which cause environmental pollution and damage to the human and the livestock. The objective of this study was to investigate the important parameters for the development of efficient removal of ammonia gas by Bacillius subtilis IB101 and to optimize the medium composition for the mass production of B. subtilis IB101. The ammonia gas removal efficiency was evaluated at different growth phases and by changing culture conditions (temperature, pH). The effect of $(NH_4)_2SO_4$ concentration in preculture medium was examined. Medium optimization for the mass production of B. subtilis IB101 was performed by using Plackett-Burman design and one factor at a time method. The removal of ammonia gas was more efficient at exponential phase by 20% than at stationary phase. The ammonia gas removal was the highest at pH 4 and 30 $^{\circ}C$. There was not any significant influence of concentration of $(NH_4)_2SO_4$ on the removal of ammonia gas. The components of optimized medium for the production of viable Bacillus subtilis IB101 was yeast extract 10 g/l, soluble starch 2.5 g/l, $MgSO_4$ 6 g/l, $CaCl_2$ 1.55 g/l, $(NH_4)_2SO_4$ 5 g/l, $KH_2PO_4$ 0.75 g/l, soy bean meal 8 g/l.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.