• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.1005-1011
• /
• 2004

Squeeze film dampers (SFDs) have been commonly used to effectively enhance the dynamic behavior of the rotating shaft supported by rolling element bearings. However, due to the recent trends of high operating speed, high load capacity and light weight in rotating machinery, it is becoming increasingly important to change the dynamic characteristics of rotating machines in operation so that the excessive vibrations, which may occur particularly when passing through critical speeds or unstable regions, can be avoided. Semi-active type SFDs using magneto-rheological fluid (MR fluid), which responds to an applied magnetic field with a change in rheoloaical behavior, are introduced in order to find its applications to rotating machinery as an effective device attenuating unbalance responses. In this paper, a semi-active SFD using MR fluid is designed, tested and identified by means of linear analysis to investigate the capability of changing its dynamic properties such as damping and stiffness. Furthermore, the proposed device is applied to a rotor system to investigate its potential capability for vibration attenuation: an efficient method for selecting the optimal location of the proposed damper is introduced and control algorithm that could improve the unbalance response properties of a flexible rotor is also proposed.

• 대한전자공학회논문지
• /
• 제11권1호
• /
• pp.1-7
• /
• 1974

본 연구는 강력한 초음파 음계를 형성시키는 것을 목적으로한 반사형 초음파 집속기에 관한 것이다. 이 집속기는 초음파반사의 임계각이 일어난 점을 경계로 하는 전반사가 일어나는 반사면만을 이용한 회전 기물체로 구성하였다. 그리고 초음파를 발생한 변환기의 형태에 따라 평판형 변환기에 적용되는 내측면 반사체와 원간형 변환기에 운용된 외측면 반사체의 2종으로 구분하여 집속기를 설계제작하고 측정하였다. 이 반사형 집속기는 plastics lens에 의한 투과형 집속기에 비하여 여러가지 장점을 갖이고 있다. 즉 재질에 유리나 금속을 사용하므로 높은 온도의 매체중은 물론 강력한 음계내에서 적용도가 크고 또 전반사를 이용하므로 집속효율이 커서 강력한 초음파 음계를 필요로 한 공업용 초음파 집속기로 이용될 것으로 사료된다.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.268-272
• /
• 2016

A brush-less type synchronous generator is driven by an internal-combustion engine that is used for emergency source. This kind of generator has to maintain output voltage in a range of some degree under the abrupt load irregular conditions such as a full load trip. This paper suggests a suppression method of increasing the output voltage over the rating. Automatic voltage regulator detects excessive rising of output voltage of the generator and supplies the signals to a switch installed in the rotating exciter through the photo-coupler. The current of main field rapidly decreases by additional resistor of the main filed circuit. Therefore, the output voltage of the generator is maintained effectively. The experimental results verified that the excessive value of the output voltage is limited in the range of 7% of the rated voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.85-87
• /
• 1998

In the industrial field, the necessity for the linear motion is increasing. Because of the motion converting mechanism there exist many losses. So the application of linear machines instead of rotating machines is increasing. As compared with a mono-polar type linear DC motor, it is possible for a multi-polar type linear BC motor to have a longer stroke and more thrust with thin shape. However, there are thrust ripple on multi-polar type one. In this paper, a design to multi-polarize of the linear DC motor is discussed. In order to make a smoother thrust on multi-polar type linear BC motor. a method is proposed.

• 전기의세계
• /
• 제25권5호
• /
• pp.79-87
• /
• 1976

This paper is to investigate the A.C generation of MHD engine, converting directly the kinetic energy of conductive gas in high temperature to electric power by the effect of magnetic field. It is known that there are at least two kinds of method in A.C MHD power generation; one, by sending stationary plasma flow in an alternating or rotating magnetic field and the other, by transmission of pulse type plasma flow in uniform and constant magnetic field, former method is adopted here. In order to raise the total efficiency of close cycle in combination with nuclear power and MHD genertaion, an argon plasma jet is utilized as heat source, which is not mixed with the seed material, and the design data are obtained for A.C MHD generation in small capacity, but induced voltage and power output have the maximum values, 15 voltages and 7.5W respectively due to plasma flow with low conductivity and weak magnetic field.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.119-125
• /
• 2008

A new type of swivel unit is suggested in order to complement weak points of the existing. This new type of Swivel unit is developed by adopting a spring type cable which has elasticity and restoring force. To minimize the troubles in the process of manufacturing during operating the new type system, strength analysis and the check of interference between parts are accomplished with CATIA. The check of rotating performance is also carried out to determine the diameter and length of spring type cable by SimDesigner motion analysis. Swivel unit used in the robot spot welding is developed with spring type cable and its usefulness in the industrial field is verified through experiments. This system has been registered for patent.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.162-167
• /
• 2017

Magnetic spiral-type microrobots, which are driven by a rotating magnetic field, have excellent locomotive abilities, whereas their medical applications are limited in the terms of function, such as the ability to drill in blood vessels. In this study, we propose a new robot with superior applications using a magnetic spiral-type machine. The proposed robot can be applied to stent transportation and installation without a catheter. In particular, the robot can be applied to the cardiovascular system, cerebrovascular disease, and nonvascular stent applications depending on the robot size. The robot consists of two independent spiral-type machines and four magnets in total. We controlled directions of thrust force of the two machines, respectively, for active locomotion with a task. We conducted a preliminary validation of the proposed robot for stent transportation and installation through experimental analyses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.224-227
• /
• 1998

Linear motors are increasingly employed as direct actuators replacing the more conventional systems composed by a rotating motor and a mechanical device. Linear DC motor is useful in a high speed and high accuracy positioning system with a feedback controller. Because of these advantages, linear DC motors have already been used as motors of pen recorders and magnetic disk storage devices, these are moving coil type linear DC motors as these movers are light. Moving magnet type linear DC motor has advantages at long stroke motors because its mover's feeding wires for driving is not necessary. This paper is concerned with the analysis of linear DC motor that is moving magnet type with unipolar. In order to analyze the dynamic behaviour a mathematical model based on a simplified field analysis developed. A two dimensional finite element field solution is employed in order to illustrate the effect of yoke saturation and motor performance. It is deduced the relation between the limit value of the thrust of the linear DC motor and the dimension of the yokes.

• Steel and Composite Structures
• /
• 재36권6호
• /
• pp.617-629
• /
• 2020

The purpose of this paper is to depict the effect of rotation and initial stress on a magneto-thermoelastic medium with diffusion. The problem discussed within memory-dependent derivative in the context of the three-phase-lag model (3PHL), Green-Naghdi theory of type III (G-N III) and Lord and Shulman theory (L-S). Analytical expressions of the considered variables are obtained by using Laplace-Fourier transforms technique. Numerical results for the field quantities given in the physical domain and illustrated graphically in the absence and presence of a magnetic field, initial stress as well as the rotation. The differences in variable thermal conductivity are also presented at different parameter of thermal conductivity. The numerical results of the field variables are presented graphically to discuss the effect of various parameters of interest. Some special cases are also deduced from the present investigation.

• 천문학회보
• /
• 제41권1호
• /
• pp.40.1-40.1
• /
• 2016

Recent integral-field spectrograph surveys have found that similar-looking early type galaxies have wide range of rotational properties (Emsellem et al. 2007). This finding initiated a new point of view to the galaxies; rotation of galaxy as the first parameter of galaxy classification (Emsellem et al. 2011, Cappellari et al. 2011, for example). Some theoretical studies tried to address the origin of galaxy rotation. Idealized galaxy merger simulations have shown that galaxy-galaxy interactions have significant effects on the rotation of galaxies. Cosmological simulations by Naab et al. 2014 also added some more insights to the rotation of galaxies. However, previous studies either lack cosmological background or have not enough number of samples. Running a set of cosmological hydrodynamic zoom-in simulations using the AMR code RAMSES(Teyssier 2002). we have constructed a sample of thousands of galaxies in 20 clusters. Here we present a kinematic analysis of a large sample of galaxies in the cosmological context. The overall distribution of rotation parameter of simulated galaxies suggests a single peak corresponding to fast rotating galaxies. But when divided by mass, we find a strong mass dependency of galaxy rotation, and massive galaxies are distinctively slow rotating. The cumulated effective of mergers seems to neutralize galaxy rotation as suggested by previous studies (Khochfar et al. 2011, Naab et al. 2014, and Moody et al. 2014). This is consistent with the fact that massive galaxies tend to rotate more slowly after numerous mergers. However, if seen individually, merger can either increase or decrease galaxy rotation depending on mass ratio, orbital parameter, and relative rotation axis of the two galaxies. This explains the existence of some non-slow rotating massive early type galaxies.