• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.850-858
• /
• 1997

A new a posteriori error estimator is introduced and applied to variational inequalities occurring in problems of flow through porous media. In order to construct element-wise a posteriori error estimates the global error is localized by a special mixed formulation in which continuity conditions at interfaces are treated as constraints. This approach leads to error indicators which provide rigorous upper bounds of the element errors. A discussion of a compatibility condition for the well-posedness of the local error analysis problem is given. Two numerical examples are solved to check the compatibility of the local problems and convergence of the effectivity index both in a local and a global sense with respect to local refinements.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.120-127
• /
• 1998

Differential inequalities occurring in problems of obstacle contact problems are recast into variational inequalities and analyzed by finite element methods. A new a posteriori error estimator, which is essential in adaptive finite element method, is introduced to capture the errors in finite element approximations of these variational inequalities. In order to construct a posteriori error estimates, saddle point problems are introduced using Lagrange parameters and upper bounds are provided. The global upper bound is localized by a special mixed formulation, which leads to upper bounds of the element errors. A numerical experiment is performed on an obstacle contact problem to check the effectivity index both in a local and a global sense.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.585-588
• /
• 1987

• 소성∙가공
• /
• 제13권4호
• /
• pp.334-341
• /
• 2004

In this study, a remeshing algorithm adapted to the mesh density map using the Delaunay mesh generation method is developed. In the finite element simulation of forging process, the numerical error increases as the process goes on because of discrete property of the finite elements and distortion of elements. Especially, in the region where stresses and strains are concentrated, the numerical error will be highly increased. However, it is not desirable to use a uniformly fine mesh in the whole domain. Therefore, it is necessary to reduce the analysis error by constructing locally refined mesh at the region where the error is concentrated such as at the die corner. In this paper, the point insertion algorithm is used and the mesh size is controlled by using a mesh density map constructed with a posteriori error estimation. An optimized smoothing technique is adopted to have smooth distribution of the mesh and improve the mesh element quality.

• 전자공학회논문지B
• /
• 제31B권12호
• /
• pp.108-115
• /
• 1994

Most pattern classifiers have been designed based on the ML (Maximum Likelihood) training algorithm which is simple and relatively powerful. The ML training is an efficient algorithm to individually estimate the model parameters of each class under the assumption that all class models in a classifier are statistically independent. That assumption, however, is not valid in many real situations, which degrades the performance of the classifier. In this paper, we propose a minimum-error-rate training algorithm based on the MAP (Maximum a Posteriori) approach. The algorithm regards the normalized outputs of the classifier as estimates of the a posteriori probability, and tries to maximize those estimates. According to Bayes decision theory, the proposed algorithm satisfies the condition of minimum-error-rate classificatin. We apply this algorithm to NPM (Neural Prediction Model) for speech recognition, and derive new disrminative training algorithms. Experimental results on ten Korean digits recognition have shown the reduction of 37.5% of the number of recognition errors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.87-90
• /
• 1988

This paper reports a simple posteriori error estimate method for adaptive finite element mesh generation using quadratic shape function especially for the magnetic field problems. The elements of quadratic shape function have more precise solution than those of linear shape function. Therefore, the difference of two solutions gives error quantity. The method uses the magnetic flux density error as a basis for refinement. This estimator is tested on two dimensional problem which has singular points. The estimated error is always under estimated but in same order as exact error, and this method is much simpler and more convenient than other methods. The result shows that the adaptive mesh gives even better rate of convergence in global error than the uniform mesh.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.86-93
• /
• 2002

A new error estimation method is proposed. This utilizes the variation of energy functional about the mapping function between the global and the master elements. The resultant system of equations is the weak form of the generalized conservation checks. However, This formulation has an important information about the relations between the connected elements. In other words, some relations between the connected elements are obtained and these can be used very usefully to measure it posteriori error. In this paper, the explicit formulations are presented for the 1-dimensional model and the 2-dimensional model problems. Numerical results are provided for first order shear deformation theody of beam model and the plane stress problem.

• 한국통신학회논문지
• /
• 제32권3C호
• /
• pp.338-347
• /
• 2007

본 논문에서는 순환 보호 구긴(cyclic-prefix)을 사용하는 시공간 블록 부호 (STBC: Space-Time Block-Coding) 단일 반송파 시스템에서 향상된 채널 성능을 위한 가중된 블록 적응형 주파수 영역 채널 추정기를 제안한다. 제안된 채널 추정기 구조는 필터 입력 신호에 대해 STBC로 구성된 블록을 형성하며, 이후 형성된 입력 블록에 대해 사후 오차 (a posteriori error)를 이용하는 가중된 LS (least-square) 규준을 적용하여 알고리즘을 유도한다. 또한 정적 채널에서 steady-state EMSE (excess mean-square error) 분석을 통해 블록 길이가 늘어남에 따라 EMSE를 분석한다. 전산 모의실험에서는 시변 TU (typical urban) 채널에서 블록 길이를 증가시킬수록 제안한 채널 추정기는 기존 NLMS와 RLS 채널 추정기들 보다 우수한 성능을 나타냄을 확인 할 수 있다.

• 한국철도학회논문집
• /
• 제2권3호
• /
• pp.46-53
• /
• 1999

In this paper, made was a study on a mesh generation method based on the pollution error. This method is designed for the control of the pollution error in any patch of elements of interest. It is a well-known fact that the pollution error estimates are much more than the local one. When the pollution error is significant, nothing can be said about the reliability of any estimator based on local computations in the patch. Reliable a posteriori error estimation is possible by controlling the pollution error in the patch through proper design of the mesh outside the patch. This design is possible by equally distributing the pollution error indicators over the mesh outside the patch. The mesh generated from the conventional feedback pollution-adaptive mesh generation algorithm needs many iterations. Therefore, the solution time is significant. But the remeshing scheme in the proposed method was used here. It was shown that the pollution-adaptive mesh improves the E.I., simply denoted as Effectivity Index, on the patch of interest, and the pollution error reduces less than the local error.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.677-687
• /
• 2006

크리깅 보간법은 지구통계학 분야에 주로 사용되는 보간법의 하나이다. 이 방법은 실험적 베리오그램과 이론적 베리오그램의 작성과 크리깅 보간법의 정식화에 관한 연구를 포함하고 있다. 종래의 응력복구를 위한 최소제곱법과 대조적으로, 가우스적분점에서의 응력데이타로부터 준정해를 얻기 위해 가중 최소제곱법에 기초를 둔다. 즉, 동일한 가중치를 사용하는 종래의 방식들과는 달리 가우스적분점에서의 응력값의 보간을 위하여 베리오그램 모델링을 통한 가중치가 결정된다. 한편, 분할된 요소망에 Zienkiewicz와 Zhu에 의해 제안된 SPR기법에 기초를 둔 사후오차평가를 통해 p-차수를 균등 또는 선택적으로 증가시키는 자동체눈 방식이 도입되었다. 이 방법의 정당성을 보기위해 인장력을 받는 개구부를 갖는 평판문제를 해석하였다. 또한, 기존의 최소제곱법과의 비교를 통한 크리깅보간법의 정당성을 보여 주었다.