• 천문학회보
• /
• 제43권1호
• /
• pp.53.3-54
• /
• 2018

Solar Proton Events (SPEs) are the energetic phenomena related particle acceleration occurred in solar corona. Conventionally, they have been classified into two groups as the impulsive and gradual cases caused by reconnection in the flaring site and by shock generated by CME, respectively. In the previous studies, we classified these into four groups by analyzing the proton acceleration patterns in multi-energy channel observation. This showed that acceleration due to the magnetic reconnection may occur in the corona region relatively higher than the flaring site. In this study, we analyzes 54 SPEs observed in the energy band over 25 MeV from 2009 to 2013, where STEREO observations as well as SOHO can be utilized. From the multi-positional observation, we determine the exact time at which the Sun-Earth magnetic field line meets the CME shock structure by considering 3-dimensional structure of CME. Also, we determine the path length by considering the solar wind velocity for each event, so that the SPE onset time near the sun is obtained more accurately. Based on this study, we can get a more understanding of the correlation between CME progression and proton acceleration in the solar coronal region.

• Transactions on Electrical and Electronic Materials
• /
• 제16권1호
• /
• pp.29-33
• /
• 2015

This paper presents the results of the optical characteristics of ITO thin film with different buffer layer thicknesses of $SiO_2$ and $Nb_2O_5$ for touch sensor application. $SiO_2$ and $Nb_2O_5$ buffer layers were deposited using RF magnetron sputtering equipment. The buffer layers were inserted between glass and ITO layers. In order to compare with the experimental results, the Essential Macleod Program (EMP) was adopted. Based on EMP simulation, the [$Nb_2O_5{\mid}SiO_2{\mid}ITO$] multi-layered thin film exhibited high transmittance of more than 85% in the visible region. The actual experimental results also showed transmittance of more than 85% in the visible region, indicating that the simulated results were well matched with the experimental results. The sheet resistance of ITO based film was about $340{\Omega}/sq$. The surface roughness maintained a relatively small value within the range of 0.1~0.4 nm when using the $Nb_2O_5$ and $SiO_2$ buffer layers.

• Journal of Welding and Joining
• /
• 제23권2호
• /
• pp.66-74
• /
• 2005

API(American Petroleum Institute) steel, as a line pipe material, requires the enhanced mechanical and chemical properties with the environmental severity. Especially, the weld part(weld metal and heat affected zone) is an important region for the safety. However, the study for the behavior of microstructure and toughness in multi-pass welding is seldom. In this study, the relationship between the microstructure and toughness of welds with several welding, bending and heat-treatment conditions was examined. In particular, HIC property in the weld metal was evaluated. The microstructure and toughness in multi-passed HAZ seemed to be determined by the final welding thermal cycle and the low toughness was attributed to the MA constituents formed in the intercritically reheated region. The weld metal showed very low toughness and it was not improved by the change in bending and heat treatment conditions. Additionally, the cracks are observed in the weld metal. from these results, it was found that the choice of welding wire/flux is very important.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.462-468
• /
• 2022

The selection and effective utilization of peak-fitting software for conventional gamma-ray spectrum analysis is significant for accurate determination of the mass fraction of elements, particularly in complex peak regions. Majority of the peak-fitting programs can derive similar peak characteristics for singlet peaks, but very few programs can deconvolute multi-peaks in a complex region. The deconvolution of multi-peaks requires special peak-fitting functions, such as left and right-skew distributions. In the this study, 843.76 keV (²⁷Mg) peak area from the complex region (840 keV-850 keV) determined and compared using four different peak-fitting programs, namely, GammaVision, Genie2000, HyperLab, and HyperGam. The 843.76 keV peak interfered with 841.63 keV (^152mEu) and 846.81 keV (⁵⁶Mn). The total Mg concentration was determined through k₀-instrumental neutron activation analysis by applying the isotopic interference correction factor ²⁷Al(n,p)²⁷Mg through the simultaneous determination of Al concentration. HyperLab and HyperGam peak-fitting programs reported consistent peak areas, and resultant concentrations agreed with the certified values of matrix-certified reference materials.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.369-380
• /
• 2023

The aim of this paper is to investigate stress analysis of semi-infinite soils consisting of two layers with twin rectangular tunnels under static loads. The region close to the ground surface and tunnel modelled within finite elements. In order to use a more realistic model, the far region is modelled within infinite elements. The material model of the layered soil is considered as elastic and isotropic. In the finite element solution of the problem, two dimensional (2D) plane solid elements are used with sixteen-nodes rectangular finite and eight-nodes infinite shapes. Finite and infinite elements are ordered to be suitable for the tunnel and the soils. The governing equations of the problem are obtained by using the virtual work principle. In the numerical process, the five-point Gauss rule is used for the calculation of the integrations. In order to validate using methods, comparison studies are performed. In the numerical results, the stress distributions of the two layered soils containing twin rectangular tunnels presented. In the presented results, effects of the location of the tunnels on the stress distributions along soil depth are obtained and discussed in detail. The obtained results show that the locations of the tunnels are very effective on the stress distribution on the soils.

• 한국지형학회지
• /
• 제19권4호
• /
• pp.59-71
• /
• 2012

이 연구는 다중시기 원격탐사 영상과 GPS 측량자료 및 입도분석 자료를 이용하여 부산 송정해수욕장의 장기간 해안지형 변화와 원인을 규명하였다. 연구결과, 다중시기 원격탐사 영상 분석에서는 2000년대 초까지 해빈이 전체적으로 안정 상태였으나, 2000년 이후 해안을 따라 호안도로가 건설되면서 전반적으로 침식이 진행되었다. DEM 변화 분석에서는 해빈을 따라 호안도로가 건설된 이후 전체적으로 해빈의 고도가 낮아지고 범의 경사가 급해지는 것으로 보아 침식환경이 우세한 것으로 나타났다. 하지만 세부적으로는 북쪽 해빈지역에서 침식보다는 오히려 퇴적환경이 약간 우세하여 범의 경사가 다소 완만해진 것으로 나타났다. 현장시료의 입도분석에서는 해빈의 남동부 지역(E측선)이 가장 조립화 경향을 보였는데, 이러한 결과는 이 지역이 비교적 외해로부터 유입되는 강한 파랑에너지에 직접적으로 노출되었기 때문이다. 결과적으로 최근 연구지역 내 해빈 침식의 주요 원인은 해안을 따라 건설된 호안도로에 의해 사구로부터의 모래 공급원 차단과 남동쪽 해안에서의 파랑에너지 강화에 따른 세굴 현상 등에 기인한다. 따라서 향후 지형변화나 인위적인 변화가 없을 경우 지속적으로 침식이 될 가능성이 높아 이에 대한 대책수립이 필요하다.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.561-568
• /
• 2010

Instrumentation radar in a test range has an important role to measure target's TSPI(time, space, position, information). It is well known that it tracks a target stably using a beacon mode. But it may fail to track a target in a certain region using a beacon mode. In this paper, we modeled a simple missile shape similar to ATCMS with two beacon antenna and analyzed an antenna radiation pattern using MLFMM(Multi Level Fast Multipole Method) method. Using the analyzed result of the radiation pattern of the antenna and the attitude data of target, we simulated beacon tracking performance of an instrumentation radar. As a result of simulation, we showed that an instrumentation radar may lose the target because it tracks a area of the beacon antenna pattern.

• 천문학회지
• /
• 제49권1호
• /
• pp.19-23
• /
• 2016

Magnetic decreases are often observed in various regions of interplanetary space. Many studies are devoted to reveal the physical nature and generation mechanism of the magnetic decreases, but still we do not fully understand magnetic decreases. In this study, we investigate the structure of a magnetic decrease observed in a corotating interaction region using multi-spacecraft measurements. We use three spacecraft, ACE, Cluster, and Wind, which were widely separated in the x- and y-directions in the geocentric solar ecliptic (GSE) coordinates. The boundaries of the magnetic decrease are the same at the three locations and can be identified as tangential discontinuities. A notable feature is that the magnetic decrease has very large dimension, ≳ R_E, along the boundary, which is much larger than the size, ~ 6 R_E, along the normal direction. This suggests that the magnetic decrease has a shape of a long, thin rod or a wide slab.

• 정보처리학회논문지B
• /
• 제11B권3호
• /
• pp.289-296
• /
• 2004

일반적인 워터마킹 기술들은 영상의 특성을 고려하지 않은 채 신체 책인 영상에 워터마크를 삽입하는 경우가 많다 본 논문에서는 워터마킹 알고리즘을 웨이브렛을 기반으로 구현을 하였으며, 견고한 워터마크 삽입을 위해 Multi-Threshold Watermark Coding(MTWC)의 원리에 기초하여 Region of Interest(ROI)라고 불리우는 영상의 영역에 큰 계수를 찾아 워터마크를 삽입하게 된다. 이때 Human Visual System(HVS)을 이용하여 견고성과 비가시성의 향상을 도모하였다. 워터마크 삽입대역은 중주파 대역에 삽입을 하게 되는데 중주파 대역에 삽입한 워터마크는 어떠한 영상 처리과정 후에도 높은 비율의 추출을 보였으며, 워터마크가 삽입된 영상의 왜곡정도도 다른 대역보다 상대적으로 적게 나타나므로 중주파 대역에 워터마크를 삽입하였다. 워터마크는 의사 랜덤 시퀀스(Pseudo Random Sequence)로 구성되어 있고 워터마크의 검출은 Cox의 유사도 측정식을 이용하여 워터마크의 삽입여부를 판단한다

• 한국지진공학회논문집
• /
• 제7권1호
• /
• pp.41-55
• /
• 2003

상세한 지진해일 범람 현상을 규명하기 위하여 수립된 전회의 동적결합 차분 모형(Choi et al.)이 1983년 동해중부지진에 의한 지진해일 연구를 위해 우리나라 동해안 전역에 적용되었다. 계산영역은 격자의 크기가 다른 몇 개의 둥지영역이 평행하거나 경사가 진 방향으로 연결되어 구성되어 있다. 제일 안쪽의 둥지 영역은 해안을 따라 순차적으로 16영역으로 구성되었으며, 격자간격은 약 30m이다. 천수방정식(선형과 비선형)이 적용된 수치 시뮬레이션은 둥지영역의 격자크기에 따라 직각 또는 구면좌표계가 채택되었으며, 평행 및 경사 접합이 제일 안쪽의 둥지형 모형에 적용되었다. 시뮬레이션에 의한 결과는 지진해일 사상에 대한 처오름 높이의 관측치와 잘 일치하였다. 지진해일고 분포곡선의 개선이 수치적으로 연구되었으며, 지진원으로부터 거리가 먼 경우에는 대수정규분포를 따르는 경향을 보인다.