• 한국건축시공학회지
• /
• 제22권6호
• /
• pp.673-680
• /
• 2022

모듈러 건축은 시공 기간의 단축, 건축비용 절감 등의 여러 가지 장점에도 불구하고 국내 건설시장에서 좀처럼 탄력을 받지 못하고 있다. 이러한 원인에는 모듈러 내화 기술 적용의 한계도 있으나 무엇보다 내화구조 제도에 대한 접근성이 쉽지 않은 것이 주요 요인으로 간주되고 있다. 따라서 모듈러 건축 활성화를 위해 주요 저해요인인 내화구조 제도 현황과 문제점에 대해 고찰하였으며, 내화구조 제도적 개선 및 연구개발 방향에 대해 제시하고자 한다.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.51-58
• /
• 2017

Purpose: G-SEED's evaluation of existing buildings in Korea is an important point because the energy consumption and CO2 emissions of existing buildings are continuously increasing due to the aging of buildings over time. In 2016, the government has set up a 'Green Remodeling Certification Standard' in G-SEED in order to revitalize the green remodeling business of existing buildings. As a result, G-SEED is distinguished between buildings with green remodeling and buildings with general remodeling. Therefore, this study analyzed the system of the certification of the green remodeling building which is aimed at improving the performance of the building. Method: First, we analyze characteristics of the existing building certification standards of G-SEED(Korea), LEED(USA), and BREEAM(UK). Second, the evaluation criteria are based on the G-SEED Green Remodeling Certification, 2016, LEED for BD + C: New construction and major renovation v.4, BREEAM UK Non-Domestic Refurbishment and Fit-out 2014. Based on the analysis results, we propose the improvement direction of G-SEED Green Remodeling Certification Standard. Result: Existing buildings should be classified into 'existing building certification' for re-certification and 'green remodeling certification' accompanied by building performance improvement. In addition, building green buildings through performance improvement should include not only energy performance, but also creating a pleasant indoor environment and minimizing environmental impact. Finally, existing buildings have accumulated information on energy and resource use, and a performance improvement plan should be established based on this information.

• 상하수도학회지
• /
• 제31권3호
• /
• pp.197-204
• /
• 2017

This study was carried out to apply the UAV(Unmanned Aerial Vehicle) coupled with Multispectral sensor for the algae bloom monitoring in river. The study acquired remote sensing data using UAV on the midstream area of Gum River, one of four major rivers in South Korea. Normalized difference vegetation index (NDVI) is used for monitoring algae change. This study conducted water sampling and analysis in the field for correlating with NDVI values. Among the samples analyzed, the chlorophyll concentration exhibited strong and significant linear relationships with NDVI, and thus NDVI was chosen for algae bloom index to identify emergence aspect of phytoplankton in river. Aerial remote sensing technology can provide more accurate, flexible, cheaper, and faster monitoring methods of detecting and predicting eutrophication and therefore cyanobacteria bloom in water reservoirs compared to currently used technology. As a result, there was high level of correlation in chlorophyll-a and NDVI. It is expected that when this remote water quality and pollution monitoring technology is applied in the field, it would be able to improve capabilities to deal with the river water quality and pollution at the early stage.

• East Asian Economic Review
• /
• 제26권1호
• /
• pp.3-25
• /
• 2022

East Asia's Regional Comprehensive Economic Partnership (RCEP) came into force in 2022 as the world's largest free trade agreement. RCEP was concluded, signed and brought into force in the face of major international uncertainty and is a significant boost to the global trading system. RCEP brings Australia, China, Japan, South Korea and New Zealand into the same agreement with the ten member ASEAN group at its centre. It keeps markets open and updates trade and investment rules in East Asia, a major centre of global economic activity, at a time of rising protectionism when the WTO itself is under threat. The agreement builds on ASEAN's free trade agreements and strengthens ASEAN centrality. One of the pillars of RCEP is an economic cooperation agenda which has its antecedents in ASEAN's approach to bringing along its least developed members and builds on the experience of capacity building in APEC and technical cooperation under the ASEAN Australia-New Zealand Free Trade Agreement. There is an opportunity to create a framework that facilitates deeper economic cooperation that involves experience-sharing, extending RCEP's rules and membership at the same time as strengthening political cooperation. The paper suggests some areas that might be best suited to cooperation - that is confidence and trust building instead of or before negotiation - and discusses how non-members may be engaged and the membership expanded. Options such as multilateralising provisions and becoming a platform for policy convergence and coordinating unilateral reforms are canvassed.

• 무역학회지
• /
• 제46권1호
• /
• pp.59-81
• /
• 2021

This paper aims to analyze Korea's trade and investment performance in Spain and the business environment of Spain, and to find efficient strategies for entering into the Spanish market. This study is organized into five chapters. To begin with, it explains an overview of the Spanish economy and the current status of its major industries. Then, it analyzes Korea's trade and investment performance in Spain, the structure of comparative advantage and the trade trends of major import and export items, since 2011 when the Korea-EU FTA went into effect. Lastly, based on the results of this analysis, Korea's strategies for entering into the Spanish market are derived. The strategies derived from the analysis are as follows: (1) entering startups in the Spanish market through CVC cooperation and participation in large tech forums, (2) linking the Spanish interest in K-Culture to consumer goods exports, (3) promoting cooperation in the IT industry in response to the Spanish government's 'Connected Industry 4.0', (4) building a new Korean-Spanish value chain in response to the mobility revolution, (5) advancing jointly into a third country by combining the strengths of both Korea and Spain, (6) cooperating with the Spanish government to establish a sustainable energy policy, (7) promoting jointly with the Spanish government through smart city strategies and project exchanges, and (8) building a European logistics hub in Spain in preparation for post-Brexit.

• 국제초고층학회논문집
• /
• 제3권1호
• /
• pp.81-87
• /
• 2014

The use of Buckling Restrained Braces (BRB) for enhancing the performance of the buildings is gaining wider acceptance. This paper presents the first application of these devices in a major high-rise building in the Philippines. A 50-storey residential reinforced concrete building tower, with ductile core wall, with BRB system is investigated. The detailed modeling and design procedure of buckling restrained brace system is presented for the optimal design against the two distinct levels of earthquake ground motions; serviceable behavior for frequent earthquakes and very low probability of collapse under extremely rare earthquakes. The stiffness and strength of the buckling restrained brace system are adjusted to optimize the performance of the structural system under different levels of earthquakes. Response spectrum analysis is conducted for Design Basis Earthquake level and Service level, while nonlinear time history analysis is performed for the most credible earthquake. The case study results show the effectiveness of buckling restrained braces.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.23-29
• /
• 2020

Multilayer sub-contracting is a significant practice among the world, including Hong Kong. When a principal contractor secured a project from a developer, the specific jobs will usually be breaking down and sub-contractors with the lowest bid [1]. The adoption of multilayer sub-contracting has been a controversy issue which is considered as a two-side blade. While certain studies have been carried out to examine both the contributions, damages and improvements for multi-layer subcontracting, the construction industry and researchers are still waiting for a solid measure to enhance the system. Hence, this research attempts to study the advantages, disadvantages, conducts a comparison between single and multilayer sub-contracting and measures of current Hong Kong construction industry based on literature review, questionnaire and in-depth interviews. To achieve the objectives, Analytic Hierarchy Process (AHP) and total weighted score methods are adopted to examine and rank the criterion. The findings of this study provide a good basis for understanding the major reasons and problems caused by the adoption of multilayer sub-contracting. Besides, the identified safety perspective explores a new perspective regarding to issues of multi-layer subcontracting, which will serve as a solid foundation for further research to enhance safety performance. Finally, the findings of measurements towards improvement of multilayer sub-contracting will also provide a solidsolution for construction industry.

• 한국디지털건축인테리어학회논문집
• /
• 제10권3호
• /
• pp.19-28
• /
• 2010

The construction projects are recently having changes in their magnitude and complexity. Therefore, the amount of information created and managed by participants over project phases is enormous and this may cause difficulties in consistent and integrated data management. Because of the change in construction projects, there is a need to apply more logical and systematic ways to deal integrated data management. For the solution to this, BIM(Building Information Modeling), a new paradigm for integrated management of the information over project life-cycle, has been seriously considered. Also, the Korean Public Procurement Service announced that project over 50 billion Korean Won should introduce BIM into procurement starting from 2012. However, the studies and development have lack on studies of applying BIM and managing the data made using BIM in pre-design and maintenance stage. In pre-design stage, the concept of schematic design model is made to support for making major decisions concerning the size, shape and cost of the project. To decide the cost for the building in this stage by making use of BIM, estimating the amount of building materials used for constructing should be preceded. In this study, the pre-design BIM is explained to gain a better understanding of its process, since this paper focused on space programming stage. Finally, the paper suggests the concept process of estimating the amount of materials in building interior finishing from selecting the type for the elements of each space made to support the client for making decisions in space programming stage based on pre-design BIM.

• 한국건축시공학회지
• /
• 제23권1호
• /
• pp.93-102
• /
• 2023

건축감리는 시공과정을 관리·감독하여 고품질의 결과물 창출을 지원하는 주요 업무단계로 정의할 수 있다. 이와 같은 감리업무의 성공적 수행을 위해서는 불확실한 현장여건에서 발생하는 다양한 정보의 수집이 전제되어야 하나, 현행 감리업무는 보고서 등 문서자료를 중심으로 운영되어 정보 수집에 한계가 존재한다. 실제 최근 국내에서 발생한 공동주택 붕괴 사고의 원인 중 하나로 감리업무 수행을 위한 정보 소통의 한계가 지적된 바 있다. 이에 본 연구는 건축감리 업무의 효율성 제고를 위해 활용할 수 있는 디지털 기술의 종류를 분석하고, 이에 대한 우선적용 순위를 제시하였다. 우선 적용 순위는 다양한 이해관계자를 대상으로 설문조사를 통해 수집된 데이터를 계층적의사결정기법을 통해 정량적으로 평가하였다. 본 연구의 결과는 향후 건축감리 업무를 대상으로 디지털 기술 적용방향을 검토하기 위한 로드맵 수립의 기초자료로서 활용이 가능할 것으로 예상된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.223-224
• /
• 2022

The occurrence of defect, one of the major risk elements, gives rise to construction delays and additional costs. Although construction companies generally prefer to use a method of identifying and classifying the causes of defects, a system for predicting the rise of defects becomes important matter to reduce this harmful issue. However, the currently used methods are kinds of reactive systems that are focused on the defects which occurred already, and there are few studies on the occurrence of defects with prediction systems. This paper is about preliminary study on the development of judgemental algorithm that informs us whether additional works related to defect issue are needed or not. Among machine learning techniques, deep neural network was utilized as prediction model which is a major component of algorithm. It is the most suitable model to be applied to the algorithm when there are 8 hidden layers and the average number of nodes in each hidden layer is 70. Ultimately, the algorithm can identify and defects that may arise in later and contribute to minimize defect frequency.