• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.714-723
• /
• 2003

An effective technique to increase the signal swing and reduce noise is to use fully-differential -circuits. However, design of a common-mode feedback (CMFB) circuit that stabilizes the common-mode output level is essential. In this paper, a general description is given to fully-differential amplifiers with their CMFB loops, then a new error amplifier that is just composed of transistors and stabilizes the DC output level is proposed. We designed a simple and efficient bias circuit that allows the stability and maximum input swing. Simulation result shows the enhanced phase margin and increased differential-mode input swing with a proposed error amplifier.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.14-17
• /
• 2008

This paper describes the simulation of a phase splitter for the design of Chireix Outphasing power amplifier. Phase splitter separate the input signal with $0[^{\circ}]$ into the signal with $+90[^{\circ}]$ and $-90[^{\circ}]$ Chireix Outphasing power amplifier get a linearized output from the signal amplifying and combining the separated signal with the phase of $+90[^{\circ}]$ and $-90[^{\circ}]$ of the phase splitter. phase splitter is the core device when designing Chireix Outphasing power amplifier. It is very difficult to design phase splitter with the difference of $90[^{\circ}]$. This phase splitter is used to design the difference of $180[^{\circ}]((90[^{\circ}]+{\alpha}),\;-(90[^{\circ}])+{\alpha}))$ using simulation tool and a differential amplifier.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.301-308
• /
• 1995

A high-precision pre-amplifier is designed for general use in EEG measurement system. It consists of signal generator, signal amplifier with a impedance converter, shield driver, body driver, differential amplifier, and isolation amplifier. The combination of minimum use of inaccurate passive components and the appropriate matching of each monolithic amplifiers results in good noise behavior, low leakage current, high CMRR, high input impedance, and high IMRR. The performance of EEG pre-amplifier has been verified by showing the typical EEG pattevn of a nomad person through the clinical experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.113-118
• /
• 2005

This paper shows a satellite battery cell voltage monitor system to make differential voltage measurements when one or both measurement points are beyond voltage range allowed by a conventional differential amplifier. This system is particularly useful for monitoring the individual cell voltage of series-connected cells that constitute a rechargeable satellite battery in which some cell voltages must be measured in the presence of high common mode voltage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.9
• /
• pp.743-749
• /
• 2002

A 1.5V 70㏈ 100MHz CMOS class-AB complementary operational amplifier is presented. For obtaining the high gain and the high unity gain frequency, the input stage of the amplifier is designed with rail-to-rail complementary differential pairs which are symmetrically parallel-connected with the NMOS and the PMOS differential input pairs, and the output stage is designed to the rail-to-rail class-AB output stage including the elementary shunt stage technique. With this design technique for output stage, the load dependence of the overall open loop gain is improved and the push-pull class-AB current control can be implemented in a simple way. The designed operational amplifier operates perfectly on the complementary mode with 180$^{\circ}$ phase conversion for 1.5V supply voltage, and shows the push-pull class-AB operation. In addition, the amplifier shows the DC open loop gain of 70.4 ㏈ and the unity gain frequency of 102 MHz for $C_{L=10㎊∥}$ $R_{L=1㏁}$ Parallel loads. When the resistive load $R_{L}$ is varied from 1 ㏁ to 1 ㏀, the DC open loop gain of the amplifier decreases by only 2.2 ㏈.a$, the DC open loop gain of the amplifier decreases by only 2.2 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.68-79
• /
• 1992

In the high speed analog system satellite communication system, video signal processing and optical fiber interface circuits, GaAs high gain operational amplifier is advantageous due to obtain a high gain because of its low transconductance and other drawbacks, such as low frequency dispersion and process variation. Therefore in this paper, a circuit techniques for improving the voltage gain for GaAs MESFET amplifier is presented. Also, various types of existing current mirror and current mirror proposed are compared.To obtain the high differential gain, bootstrap gain enhancement technique is used and common mode feedback is employed in differential amplifier.The simulation results show that gain is higher than that of basic amplifier about 18.6dB, and stability and frequency performance of differential amplifier are much improved.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.785-793
• /
• 2007

In this paper, we present an integrated rail-to-rail fully differential operational transconductance amplifier (OTA) working at low-supply voltages (1.5 V) with reduced power consumption and showing high DC gain. An embedded adaptive biasing circuit makes it possible to obtain low stand-by power dissipation (lower than 0.17 mW in the rail-to-rail version), while the high DC gain (over 78 dB) is ensured by positive feedback. The circuit, fabricated in a standard CMOS integrated technology (AMS 0.35 ${\mu}m$), presents a 37 V/${\mu}s$ slew-rate for a capacitive load of 15 pF. Experimental results and high values of two quality factors, or figures of merit, show the validity of the proposed OTA, when compared with other OTA configurations.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.979-982
• /
• 2003

Due to the differential transmission technique and low voltage swing, LVDS has been widely used for high speed transmission with low power consumption. This paper presents the design and implementation of interface circuits for 1.5Gb/s operation in 0.35um CMOS technology. The interface circuit ate fully compatible with the low-voltage differential signaling(LVDS) standard. The LVDS proposed in this paper utilizes a sense amplifiers instead of the conventional differential pre-amplifier, which provides a 1.5Gb/s transmission speed with further reduced driver output voltage. Furthermore, the reduced driver output voltage results in reducing the power consumption.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.13-20
• /
• 2001

In this appear, we proposed the new current mirror has large output resistance and excellent current matching characteristics. If supply voltage were lowered under the conventional CMOS operational amplifier, the wing of out put power could be restricted. So, the paper suggests a new way of differential operational amplifier circuit to solve the problem. The paper proposes that a new current mirror increases output swing and has a stable operation. We compare and verify characteristics of the proposed current mirror with the cascoded current mirror and the regulated current mirror through simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.37-43
• /
• 2012

The closed-loop multiple-input multiple-output (MIMO) system has been adopted by long term evolution (LTE) system. Many techniques are proposed to enhance the transmission of LTE's advanced version to meet the increasing requirement, in which differential codebook gains a lot of interest. Previous researches on designing differential codebooks focused on quasi-diagonal unitary matrix which cannot guarantee the equal gain property. The equal gain property is very important to uplink because the performance of uplink is very sensitive to the peak-to-average power ratio (PAPR). In this paper, we derive the analytical expression of average bit error rate and PAPR for differential precoding MIMO system. Using the analytical results, we investigate the performances of several differential precoding schemes considering non-linear amplifier at the transmitter. Some selected simulation results indicate that the conventional differential precoding schemes have good performances without the consideration of non-linear amplifier. While considering non-linear amplifier, the proposed differential codebook outperforms other differential precoding schemes because it maintains the equal gain per transmit antenna.