• 한국학교ㆍ지역보건교육학회지
• /
• 제19권1호
• /
• pp.13-25
• /
• 2018

Objectives: The purpose of this study was to identify the quality of life of a serious case and to analyze the factors influencing them. A serious disease were limited to cancer, cerebrovascular disease, and cardiovascular disease. Methods: This study used original data from the 6th National Health and Nutrition Survey (2013~2015) and finally extracted 385 persons diagnosed with cancer, cerebrovascular disease and cardiovascular disease among adults over 20 years old. Linear logistic regression analysis was conducted to identify factors affecting the quality of life of this study subjects. Results: The quality of life scores of the subjects were $13.92{\pm}1.54$ points (Highest possible=15). Regression analysis showed that quality of life decreased as age increased, lower income level, lower education level, stress, depression, suicidal ideation. The explanatory power (R2) of the analysis model was 0.170. Conclusions: The results of this study showed that age, income level, education level, stress, depression, and suicidal ideation affect the quality of life of a serious case in the community.

• Journal of Computing Science and Engineering
• /
• 제4권2호
• /
• pp.128-152
• /
• 2010

With the advance of computer and communication technologies, wireless sensor networks (WSNs) are increasingly used in many aspects of our daily life. However, since the battery lifetime of WSN nodes is restricted, the WSN lifetime is also limited. Therefore, it is crucial to determine this limited lifetime in advance for preventing service interruptions in critical applications. This paper proposes a feasible static analysis approach to estimating the worstcase lifetime of a WSN. Assuming known routes with a given sensor network topology and SMAC as the underlying MAC protocol, we statically estimate the lifetime of each sensor node with a fixed initial energy budget. These estimations are then compared with the results obtained through simulation which run with the same energy budget on each node. Experimental results of our research on TinyOS applications indicate that our approach can safely and accurately estimate worst-case lifetime of the WSN. To the best of our knowledge, our work is the first one to estimate the worst-case lifetime of WSNs through a static analysis method.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1167-1173
• /
• 2010

본 논문에서는 가상 트라이아웃 방식을 이용하여 소음기 케이스의 성형에 관한 연구를 수행하였다. 먼저 사각 블랭크로부터 성형 중 변형이 일어나지 않는 부분을 코너컷하여 적정 블랭크를 설계하였고 파이프 삽입부와 어깨 반경부에 발생하는 주름을 방지하기 위해 적정 드로비드를 설계하였다. 마지막으로 파이프 삽입부 주위에 발생하는 주름과 파단을 방지하기 위해 형상비드를 설계하였다. 가상트라이 아웃방식으로 결정된 성형조건에 따라 소음기 케이스의 시제품을 제작하고 해석결과와 비교한 결과 시제품의 성형성, 두께 분포 등이 해석 결과와 잘 일치함을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2253-2262
• /
• 2005

The focus of this work is placed on the analysis of the mixture formation mechanism under the evaporative diesel spray of impinging and free conditions. As an experimental parameter, ambient gas density was selected. Effects of density variation of ambient gas on liquid and vapor-phase inside structure of evaporation diesel spray were investigated. Ambient gas density was changed between ${\rho}a=5.0\;kg/m^3$ and $12.3\;kg/m^3$. In the case of impinging spray, the spray spreading to the radial direction is larger due to the decrease of drag force of ambient gas in the case of the low density than that of the high density. On the other hand, in the case of free spray, in accordance with the increase in the ambient gas density, the liquid-phase length is getting short due to the increase in drag force of ambient gas. In order to examine the homogeneity of mixture consisted of vapor-phase fuel and ambient gas in the spray, image analysis was conducted with statistical thermodynamics based on the non-dimensional entropy (S) method. In the case of application of entropy analysis to diesel spray, the entropy value always increases. The entropy of higher ambient density is higher than that of lower ambient gas density during initial injection period.

• 보건행정학회지
• /
• 제4권2호
• /
• pp.111-125
• /
• 1994

In developing total hospital information system, large amount of time and expense are to be spent while its results are likely to lead itself to end-users' dissatisfaction. Some of the main complaints on the part of end-users come from insufficient consideration of end-users environment as well as inappropriate representation of their requirement in the system alalysis and design. This papre addresses some advantages of Essential Logical Modeling Process for better analysis and design, explaining by example the developmental process of the Patent Management and Accounting System for a tertiary care hospital. In the case, the Essential Model, suggested by McMenamin and Palmer, proved to be an effective tool for clear separation of analysis and design phase and for better communication among system developers and with end-users. The modeling process itself contributed to better program modularity as well, shown in a Structured Chart. Difficulties in learning how to identify' essential activities' for the modeling practice were experienced in the beginnins stage, which were, however, overcome by elaborating some heuristic guideling and by rdferring to necessary tools including State Transition Diagram, Control Flow Diagram, and so many. While full evaluation of the Essential Model usag remains to wait till the completion of the case project, its strengt in making clear distinction between analysis and design phase was enough to be attractive to system analysts. The model concepts are open to many further application fields, particularly such areas as business re engineering, process remodeling, office automation, and organizational restructuring.

• 한국의류학회지
• /
• 제35권7호
• /
• pp.787-800
• /
• 2011

This study investigated service recovery justice perception, purchase satisfaction, positive word-of- mouth (WOM) intention, and repurchase intention of fashion consumers according to the types of internet shopping malls. A survey was conducted from December 20 in 2010 to January 28 in 2011, and 324 respondents who had complaint with internet shopping malls were used in the data analysis. The statistical analysis methods were frequency analysis, factor analysis, reliability analysis, t-test, ANOVA, and multiple regression analysis. The results of this study were as follows. First, in case of integrated internet shopping malls, the procedure justice influenced the purchase satisfaction and the interaction justice influenced the positive WOM intention. In addition, the distribution justice influenced the repurchase intention of fashion consumers. In the case of an open market, the interaction justice influenced the purchase satisfaction and the distribution justice influenced the positive WOM intention. In case of specialized internet shopping malls, the distribution justice influenced the purchase satisfaction and the interaction justice influenced the repurchase intention. Second, there was a difference in the procedure justice, positive WOM intention, and repurchase intention according to gender.

• 대한안전경영과학회지
• /
• 제3권2호
• /
• pp.113-121
• /
• 2001

Today, facilities are composed of many complex components or parts. Because of this characteristics, the frequency of failures is decreasing, but the strength of failures is increasing; therefore, the failure analysis about many complex components or parts was needed. In the former research about Fault Tree Analysis, failure data of similar facilities have been used for forecasting about target system or components, but in case that the system or components for forecasting failure is new or qualitative and quantitative data are given simultaneously, there are many difficulty in using Fault Tree Analysis with this incorrect failure data. Therefore, this paper deal with the Fault Tree Analysis method which be applied with Fuzzy theory in above case. In case that , therefore, if there is no the correct failure data, it is represented a system or components as qualitative variable. subsequently, it converted to the quantitative value using fuzzy theory, and the values used as the value for failure forecast.

• Earthquakes and Structures
• /
• 제20권1호
• /
• pp.1-12
• /
• 2021

The occurrence of progressive collapse induced by the removal of the vertical load-bearing element in the structure, because of fire or earthquake, has been a significant challenge between structural engineers. Progressive collapse is defined as the complete failure or failure of a part of the structure, initiating with a local rupture in a part of the building and can threaten the stability of the structure. In the current study, the behavior of the structures equipped with a cylindrical friction damper, when the vertical load-bearing elements are eliminated, is considered in two cases: 1-The load-bearing element is removed under the gravity load, and 2-The load-bearing element is removed due to the earthquake lateral forces. In order to obtain a generalized result in the seismic case, 22 pair motions presented in FEMA p 695 are applied to the structures. The study has been conducted using the vertical push down analysis for the case (1), and the nonlinear time-history analysis for the second case using OpenSEES software for 5,10, and 15-story steel frames. Results indicate that, in the first case, the load coefficient, and accordingly the strength of the structure equipped with cylindrical friction dampers are increased considerably. Furthermore, the results from the second case demonstrate that the displacements, and consequently the forces imposed to the structure in the buildings equipped with the cylindrical friction damper substantially was reduced. An optimum slip load is defined in the friction dampers, which permits the damper to start its frictional damping from this threshold load. Therefore, the optimum slip load of the damper is calculated and discussed for both cases.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.393-396
• /
• 2003

A systematic investigation for the process design in deep drawing is necessary to improve the quality of drawn cups. This study concentrates mainly on the influence of process design strategy on the product quality. Several types of process design were chosen from initial blank of 100mm in diameter to make final cup of 50mm in diameter. Forming analysis are carried out to find out optimal design in terms of drawing force. We assume that the case which shows minimum drawing force in the subsequent operations is the best case. Through experiments it is found that the case which shows minimum drawing force also results in minimum drawing force and better product quality than other case. Thus, it is shown that this design strategy is very effective in the improvement of quality in drawn cups.

• 대한전자공학회논문지
• /
• 제25권6호
• /
• pp.637-646
• /
• 1988

The CMOS physical parameters are extracted using by processing models in fabrication steps, processing parameters, fabrication disturbances, control parameters. Statistical CMOS process and device simulator is proposed to evaluate the effect of inherent fluctuations in IC fabrication. Using this simulator, we perform worst case analysis in terms of statistically independent disturbances and compare this proposed method to Monte Carlo method, previous Worst Case method. And simulation results with this proposed method are more accurate than the past worst case analysis. This package is written in C language and runs on a IBM PC AT(OPUS).