• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.36-41
• /
• 2002

This study was carried out develope a ultrasonic transducer displacement generator through 26KHz and 38KHz of the frequency phase modulation on the ultrasonic transducer. This system was producted a power output generation such as 100W, 300W, 400W and 600W. Ultrasonic power output had a change of time. We made use of a Thiram hydration and detected it measurement by the ACAO method. It was to decide the result of ultrasonic power supply for time duration and the result of comparison in the 26KHz & 38KHz by UV/VIS spectrophotometer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.3
• /
• pp.598-602
• /
• 2004

In the preparation of jam using Undaria pinnatifida sporophyll, effects of food ingredients to the jam rheology were investigated. The paste was prepared by crushing the sporophyll using chopper and homogenizer with 2.5 times water and then it was filtrated before to make a jam. The sporophyll jam was adjusted to 62$^{\circ}$Brix by heating and concentration. It was a similar to the commercial jam in the gel strength. Among the various treatments, the jam prepared with 60% (w/w) sugar, 0.75% (w/w) high methoxy (HM) pectin and 0.3% (w/w) citric acid showed best quality aspects of both texture profile analysis (TPA) and sensory evaluation. Addition of 0,08% (v/w) synthetic strawberry flavor and 0.5% (w/w) cinnamon powder to sporophyll paste gave a good masking effect for the undesirable sea mustard flavor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.3455-3474
• /
• 2018

As a unique form of signed-digit representation, non-adjacent form (NAF) minimizes Hamming weight by removing a stream of non-zero bits from the binary representation of positive integer. Thanks to this strong point, NAF has been used in various applications such as cryptography, packet filtering and so on. In this paper, to improve the NAF conversion speed of the $NAF_w$ algorithm, we propose a new NAF conversion algorithm, called w-bit Shifting Non-Adjacent Form($SNAF_w$), where w is width of scanning window. By skipping some unnecessary bit comparisons, the proposed algorithm improves the NAF conversion speed of the $NAF_w$ algorithm. To verify the excellence of the $SNAF_w$ algorithm, the $NAF_w$ algorithm and the $SNAF_w$ algorithm are implemented in the 8-bit microprocessor ATmega128. By measuring CPU cycle counter for the NAF conversion under various input patterns, we show that the $SNAF_2$ algorithm not only increases the NAF conversion speed by 24% on average but also reduces deviation in the NAF conversion time for each input pattern by 36%, compared to the $NAF_2$ algorithm. In addition, we show that $SNAF_w$ algorithm is always faster than $NAF_w$ algorithm, regardless of the size of w.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1993.11a
• /
• pp.3-3
• /
• 1993

In mechanical testing of W-Ni-Pe heavy alloys, the cracks nucleate at W/W interface and propagate through W/ Imatrix interface or through matrix phase together with the cleavage of W grains. The mechanical properties can therefore be improved by control of the interfacial strength and area. In this presentation, some experimental result and techniques on this subject will be reviewed and discussed. The hydrogen embrittlement caused by the hydrogen segregation at interfaces during sintering in an hydrogen atmosphere can be removed by an heat-treattnent in vacuum or in an inert atmosphere. The heat-treatment condition can be estimated by using a diffusion equation for a cylindrical shape. The mechanical properties, in particular the impact property, are degraded by the segregation of non-metallic impurities, such as Sand P. The degradation can be prevented by adding a fourth element, such as La or Ca, active with the non-metallic impurities. The cyclic heat-treatment at usual heat-treattnent tempemture causes the penetration of matrix between W/W grain boundaries and results in remarkable increase in impact energy. This is due to an increase in the area of ductile failure during the impact test. The instability of W/matrix interface casued by addition of Mo or Re can be controlled by using W powders of different size. The increase in the interfacial area in found to be related to the presence of non-equilibrium pure W gmins among W(Mo or Re) solid solution gmins.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2801-2808
• /
• 2022

The synergistic effect of ZrC nanoparticle pining and Re solution in W matrix on the thermal stability of tungsten was studied by investigating the evolution of the microstructure, hardness and tensile properties after annealing in a temperature range of 1000-1700 ℃. The results of metallography, electron backscatter diffraction pattern and Vickers micro-hardness indicate that the rolled W-1wt%Re-0.5 wt% ZrC alloy has a higher recrystallization temperature (1600 ℃-1700 ℃) than that of the rolled pure W (1200 ℃), W-0.5 wt%ZrC (1300 ℃), W-0.5 wt%HfC (1400-1500 ℃) and W-K-3wt%Re alloy fabricated by the same technology. The molecular dynamics simulation results indicated that solution Re atoms in W matrix can slow down the self-diffusion of W atoms and form dragging effect to delay the growth of W grain, moreover, the diffusion coefficient decrease with increasing Re content. In addition, the ZrC nanoparticles can pin the grain boundaries and dislocations effectively, preventing the recrystallization. Therefore, synergistic effect of solid solution Re element and dispersed ZrC nanoparticles significantly increase recrystallization temperature.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.3
• /
• pp.237-246
• /
• 2014

Multiple emulsions, called multiphase emulsions, include water-in-oil-in-water (W/O/W) type and oil-in-water-in-oil (O/W/O) type emulsions. In cosmetic industry, they are used to stabilize active ingredients but the applicability of the multiple emulsions is limited because of low stability and difficulty of manufacturing. In this study, we investigated a two-step emulsification process for a W/O/W type emulsion. We also investigated the change of stability using different emulsifiers and oil polarity. The results suggested that polyglyceryl-10 stearate, as a main emulsifier, played an important role in the stability and the formation of the multiple emulsions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.35-43
• /
• 2022

In this paper, a study was conducted to produce 20W by combining a 10W MMIC and raising the unit power amplifier to 100W SSPA by combining the 8-way spatial coupler. SSPA requires low-loss, high-efficiency coupling techniques to meet high output with the output of a single element relatively low compared to TWTA. Designed and produced in this paper, the SSPA was manufactured as a 100W SSPA by mounting eight 20W high-power amplification modules in an 8-way spatial coupler with a reflection loss of 20dB or more and an excellent coupling efficiency of 94% or more. When -10dBm was applied, it was 112.2~169.8W at 20kHz 20%, 125.9~173.8W at 400kHz 40%, 117.5~162.2W at 800kHz 40%, showing performance of over 60dB and over 100W in all three PRF conditions.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.15 no.1
• /
• pp.13-20
• /
• 1985

The author obtained the oblique lateral trans cranial radiograms from 376 patients (114 of male, and 262 of female) with temporomandibular joint arthrosis. After tracing each film, the author analyzed the dimensional changes of the condylar heads with pain, clicking, mouth opening limitation, and masticatory difficulty respectively, which were the chief complaints of the TMJ arthrosis and compared these data with control group. The results were as follows; 1. There was a great predilection for occurrence of the TMJ arthrosis in female (262 cases) over male (114 cases). But there was no significant difference in ratio between the sexes on each symptom. In male, 60 patients (52.6%) had pain, 28 patients (24.6%) had clicking, 21 patients (18.4%) had mouth opening limitation, and 5 patients (4.4%) had masticatory difficulty. In female, 148 parients (56.5%) had pain, 57 patients (21.8%) had clicking, 47 patients (17.9%) had mouth opening limitation, and 10 patients (3.8%) had masticatory difficulty. 2. Examined controlled group, the author analyzed the dimension of W-W', 0-H, 0-A, 0-B on the right side first, and left side second. In male, the dimension of W-W' was 14.52㎜, 14.13㎜; 0-H was 13.92㎜, 13. 71㎜' 0-A was 8.91㎜, 9.0㎜ and 0-B was 8.67㎜, 8.78㎜. In female, W-W' was 13.77㎜, 13.51㎜; 0-H was 13.42㎜, 13.35㎜; 0-A was 8.92㎜, 9.01㎜; and 0-B was 8.59㎜, 8.80㎜. 3. W-W' and 0-H of the experimental group were distinctly lesser than the controlled group. Male with mouth opening limitation show the least (12.70㎜, 13.00㎜) on W-W', but both sexes with pain show the least on 0-H. There was no significant difference between experimental group with Clicking and controlled group on 0-H, 0-A, and 0-B. And also there was no difference on 0-B in patients with every symptom except masticatory difficulty. The dimensional changes of the condylar heads with those symptoms were as follows; a) In male patients, complaing of pain, W-W' of the right and left was 13.80㎜, 12.80㎜; 0-H was 13.10㎜, 12.90㎜; 0-A was 8.69㎜, 8.18㎜; 0-B was 8.33㎜, 8.42㎜. In female, W-W' was 13.01㎜, 12.90㎜; 0-H was 12.48㎜, 12.80㎜; 0-A was 8.60㎜, 8.49㎜; 0-B was 8.48㎜, 8.50㎜. b) In male patients with clicking, W-W' was 13.70㎜, 13.10㎜; 0-H was 13.90㎜, 13.10㎜; 0-A was 8.81㎜, 8.16㎜ 0-B was 8.34㎜, 8.25㎜. In female, W-W' was 13.10㎜, 13.50㎜; 0-H was 13.30㎜, 12.91㎜; 0-A was 8.95㎜, 8.49㎜; 0-B was 8.23㎜, 8.70㎜. c) In male patients with mouth opening limitation, W-W' was 12.70㎜, 13.00㎜; 0-H was 13.40㎜, 13.40㎜; 0-A was 8.37㎜, 8.48㎜; 0-B was 8.33㎜, 8.62㎜. In female, W-W' was 13.00㎜, 12.50㎜ 0-H was 12.90㎜, 13.10㎜; 0-A was 8.49㎜, 8.09㎜; 0-B was 8.77㎜, 8.01㎜. d) In male patients with masticatory difficulty, W-W' was 13.30㎜, 13.20㎜; 0-H was 13.40㎜, 12.60㎜; 0-A was 8.26㎜, 8.32㎜; 0-B was 7.80㎜, 8.20㎜. In female, W-W' was 12.30㎜, 12.00㎜; 0-H was 13.10㎜, 13.20㎜; 0-A was 8.68㎜, 7.95㎜; 0-B was 7.46㎜, 7.87㎜.

• Journal of Korea Multimedia Society
• /
• v.3 no.2
• /
• pp.174-183
• /
• 2000

Formal methods for protocol description of a system is based on the implementation id S/W. However, the importance of H/W implementation for a parts of protocol design is increasing. The combination between H/W and IP technology is needed since the implementation environment is changing from S/W to H/W for implementation of specific application protocol. H/W implementation method starting with formal description procedure is essential to guarantree correctness and reliability of the implemented H/W by characteristic of formal description language. Inthis paper, for an automated H/W implementations, ESTELLE, a formal description method, is adopted. A transformation method from specification of ESTELLE to VHDL is suggested. This is an conceptual method that comparing and analyzing similarities between basic units of protocol description such as computation and communication unit and inter processors in H/W. Then we describe transformation model, and suggest example of transformation from ESTELLE to VHDL with Inres protocol.

• Fisheries and Aquatic Sciences
• /
• v.15 no.1
• /
• pp.69-72
• /
• 2012

Effects of dietary nutrient content on the biological index and serum chemistry of olive flounder Paralichthys olivaceus achieving compensatory growth were investigated. Six treatments were prepared in triplicate. Fish were hand-fed with the control (C) diet twice daily for 8 weeks (8W-C) or fish were starved for 2 weeks and then hand-fed with the C, high protein (HP), high carbohydrate (HC), high lipid (HL), or intermediate protein, carbohydrate and lipid (IPCL) diets for 6 weeks, referred to as 6W-C, 6W-HP, 6W-HC, 6W-HL, and 6W-IPCL, respectively. Weight gain of fish in the 8W-C, 6W-HP, and 6W-IPCL treatments was higher than that of fish in the 6W-C treatment. Condition factor (CF) of the fish in the 6W-HP, 6W-HC and 6W-IPCL treatments was higher than that of fish in the 8W-C and 6W-C treatments. The hepatosomatic index (HSI) of fish in the 6W-HC, 6W-HL and 6W-IPCL treatments was higher than that of the fish in the 8W-C, 6W-C and 6W-HP treatments. Serum chemistry except triiodothyronine ($T_3$) was not significantly different among the treatments. In conclusion, CF and HSI of the fish could be indices reflecting compensatory growth, whereas $T_3$ seemed to play a partial role in achieving compensatory growth.