• 한국물환경학회지
• /
• 제34권4호
• /
• pp.363-374
• /
• 2018

The Han River serves as an important water resource for the city of Seoul, Korea and in the neighboring metropolitan areas. From the Paldang dam to the Jamsil submerged weir, the 4 water intake stations that are located for the Seoul metropolitan population were under review in this study. Therefore the water quality management in this section is very important to monitor, analyze and review to rule out any safety concerns. In this study, a 3-D hydrodynamic model, EFDC (Environmental Fluid Dynamics Code), was applied to the downstream of the Paldang Dam in the Han River, which is about 23 km in length, to determine issues related to water resource management. The 3-D grid was composed of 2,168 horizontal grids and three vertical layers. In this case, the hydrodynamic model was calibrated and verified with an observed average daily water surface elevation, water temperature and flow rate data for 3 years (2013~2015). The developed EFDC model proved to reproduce the hydrodynamics of the Han River well. The composition ratios of the noted incoming flows at the monitored intake stations for 3 years and their flow patterns in the river were analyzed using the validated model. It was found that the flow of the Wangsuk Stream depended on the Paldnag dam discharge, and it was noted that the composition ratios of the stream at the intake stations changed accordingly. In a word, the Wangsuk Stream moved mainly along the right bank of the Han River under the condition of a normal dam flow. As can be seen, when the dam discharge rate was low, the incidence of lateral mixing was often seen. The scenario analyses were also conducted to predict the transport of conservative pollutants as in the case of a chemical spill accident. Generally speaking, when scenarios were applied, the arrival time and concentration of pollutants at each intake station was thus predicted.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1333-1336
• /
• 2001

A theoretical analysis is presented for the multichannel type resonance at energies above the dissociation threshold to O(1D) in the photodissociation of OH. Dissociations to both oxygenic terms O(3P) and O(1D) are treated. Total cross sections for producing these oxygen terms display asymmetric resonance due to the quantum interference resulting from complicated interplay of electronic states correlating to these two oxygenic terms. The branching ratios of O(3Pj, j = 0, 1, 2), and the vector properties of O(3Pj, j =0,1,2) and O(1D) display extensive changes near the threshold resonance as the result of the interactions among the electronic states correlated with O(3P) and O(1D).

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.269-275
• /
• 2003

제주도 연안 정치망의 여름철 주 어획대상인 잿방어를 실험어로 하여, 음향을 이용한 어군행동 제어, 음향순치 등 바다목장 조성을 위한 어군의 관리, 사육, 어획기술에 이용할 기초자료를 제공할 목적으로 육상수조에서 수중 가청 저주파음과 전기충격을 이용하여 음향 학습 시킨 후, 주파수와 음압을 변화시켜가면서 잿방어의 섬전도를 도출 하여 심박간격의 변화로부터 청각문턱치, 청각임계비를 측정하였다. 자연환경소음에서 잿방어의 청각문턱치는 측정 주파수 80∼800 HZ의 수중 가청음을 모두 인식하였고, 측정 주파수 200∼500 HZ 에서 청각 감도가 양호하였으며, 측정 주파수 300 Hz에서 평균 음압 94.5 dB, 표준편차 4.5 dB로 가장 낮은 청각문턱치를 보였다. 평균 음압을 65 dB, 70 dB, 75 dB의 3단계로 변화시킨 백색잡음 방성으로 측정한 잿방어의 청각임계비는 측정 주파수 80, 100, 200, 300, 400, 500, 800 HZ에서 각각 평균 음압 45.9, 52.8, 42.5, 36.4, 38.6, 39.4, 44.4 dB이었다. 측정 주파수 300 HZ, 400 HZ 그리고 500 HZ 에서는 백색잡음 중에서 측정음을 식별하는 능력이 다른 측정 주파수에 비하여 우수했다. 잿방어가 주파수 300 HZ의 수중 가청음을 충분히 인식하기 위해서는 최저 100 dB 이상의 음압 강도가 펼요하며 환경 소음이 존재하는 환경에서는 소음 스펙트럼 음압 레벨보다 약 35 dB 이상 크게 방성할 펼요가 있다.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 2002년도 학술대회지
• /
• pp.238-252
• /
• 2002

In order to screen out indicators for the discrimination of ginseng habitat, some physical and chemical characteristics of Korean red ginsengs (94 kinds) and Chinese red ginsengs (50 kinds) were analyzed by using a rheometer, an electronic nose system, a combined technique of solid phase micro-extraction (SPME) and gas chromatograph equipped with an electron capture detector (GC/ECD), an X-ray fluorescence spectrometer (XRF), an inductively coupled plasma mass spectrometer (ICP/MS), a near infrared spectrometer (NIRs) and high performance liquid chromatography equipped with evaporative light scattering detector (HPLC/ELSD). The results are summarized as follows: (i) The rhizome strengths of Korean red ginsengs were significantly higher than those of Chinese red ginsengs. (ii) The electronic nose patterns of Korean red ginsengs were significantly different from those of Chinese red ginsengs. (iii) Some unidentified peaks were detected not in the headspace of Korean red ginsengs but in the headspace of Chinese red ginsengs when the headspace volatiles prepared by the SPME technique were analyzed by GC/ECD. (iv) Either the content ratios of K to Ca or Mn to Fe were significantly different between Korean red ginsengs and Chinese red ginsengs. (v) The reflectance ratios of NIRs wavenumbers such as $904\;cm^{-1}\;to\;1088\;cm^{-1}$ for Korean red ginsengs were significantly different from those for Chinese red ginsengs. (vi) The content ratios of ginsenoside-Rg to ginsenoside-Re of Korean red ginsengs were significantly higher than those of Chinese red ginsengs. These results indicate that the rhizome strength, the electronic nose pattern, the occurrence of ECD-sensitive headspace volatile components, the content ratios of K to Ca and Mn to Fe, the NIRs pattern and the content ratio of ginsenoside-Rg to -Re may be indicators for the discrimination of ginseng habitat.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.17-22
• /
• 2013

PURPOSES: Current theories for composite structures are too difficult for design engineers for construction. The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. METHODS: Some laminate orientations have decreasing values of $D_{16}$, $B_{16}$, $D_{26}$ and $B_{26}$ stiffnesses as the ply number increases. The plate aspect ratio considered is from 1 to 5. In order to study the effect of $M_x$ on the equilibrium equations, two cases are considered. $M_x$ term is considered or neglected. RESULTS: Most of the road structures have high aspect ratios, for such cases further simplification is possible by neglecting the effect of the longitudinal moment terms. CONCLUSIONS: Most of the road structures have plate aspect ratios higher than 2. It is concluded that, for all boundary conditions, neglecting the longitudinal moment($M_x$) terms is acceptable if the aspect ratio (a/b) is equal to or higher than 2. This conclusion gives good guide line for design of the road structures.

• 공업화학
• /
• 제7권4호
• /
• pp.623-632
• /
• 1996

코모노머와 코모노머의 조성을 변화시켜 프로필렌/부텐-1 및 트로필렌/헥센-1의 공중합을 실시하여 반응성비, 용융점 및 폴리머 형상등을 관찰하였다. 공중합에 사용한 촉매는 담체로서 실리카(촉매 I)와 마그네슘(촉매 II)을 사용한 고활성촉매이다. 코모노머의 조성이 증가함에 따라 폴리머의 용융점이 낮아지며, 또한 코모노머의 조성이 프로필렌/부텐-1 공중합의 경우에는 40% 이상, 프로필렌/헥센-1 공중합의 경우에는 80% 이상이면 폴리머의 형상이 무정형화 되어진다. 반응성비는 Fineman-Ross법과 Kelen-$T{\ddot{u}}d{\tilde{o}}s$법으로 구하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3395-3399
• /
• 2011

Copper oxide thin films were synthesized by reactive radio frequency magnetron sputtering at different oxygen gas ratios. The chemical and physical properties of the thin films were investigated by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray diffraction (XRD). XPS results revealed that the dominant oxidation states of Cu were $Cu^0$ and $Cu^+$ at 0% oxygen ratio. When the oxygen ratios increased above 5%, Cu was oxidized as CuO as detected by X-ray induced Auger electron spectroscopy and the $Cu(OH)_2$ phase was confirmed independent of the oxygen ratio. The valence band maxima were $1.19{\pm}0.09$ eV and an increase in the density of states was confirmed after formation of CuO. The thickness and roughness of copper oxide thin films decreased with increasing oxygen ratio. The crystallinity of the copper oxide films changed from cubic Cu through cubic $Cu_2O$ to monoclinic CuO with mean crystallite sizes of 8.8 nm (Cu) and 16.9 nm (CuO) at the 10% oxygen ratio level.

• Smart Structures and Systems
• /
• 제20권5호
• /
• pp.595-605
• /
• 2017

The present article reported the thermal buckling strength of the sandwich shell panel structure and subsequent improvement of the same by embedding shape memory alloy (SMA) fibre via a general higher-order mathematical model in conjunction with finite element method. The geometrical distortion of the panel structure due to the temperature is included using Green-Lagrange strain-displacement relations. In addition, the material nonlinearity of SMA fibre due to the elevated thermal environment also incorporated in the current analysis through the marching technique. The final form of the equilibrium equation is obtained by minimising the total potential energy functional and solved computationally with the help of an original MATLAB code. The convergence and the accuracy of the developed model are demonstrated by solving similar kind of published numerical examples including the necessary input parameter. After the necessary establishment of the newly developed numerical solution, the model is extended further to examine the effect of the different structural parameters (side-to-thickness ratios, curvature ratios, core-to-face thickness ratios, volume fractions of SMA fibre and end conditions) on the buckling strength of the SMA embedded sandwich composite shell panel including the different geometrical configurations.

• 설비공학논문집
• /
• 제2권4호
• /
• pp.279-287
• /
• 1990

An experimental study of the heat transfer characteristics between circular water jet and cylindrical inner surface is presented. The ratios of the semi-cylinder's inner diameter and the nozzle outlet diameter were varied parametrically, as were the Reynolds number and the supplementary water heights. The measurements showed that cirucmferential distribution of the heat transfer coefficient peaked at the stagnation point and, there occurred a kind of a secondary maximum of heat transfer that moved toward to stagnation point as the ratio d/D increased. The local heat transfer coefficient increases as the Reynolds number becomes larger, and the rate of increase is subjected to the influence of d/D & position of angle. Also, optimum heights of supplementary water which brings about the augmentation of heat transfer are S/D=1 for the stagnation point, the position of $15^{\circ}$ & $30^{\circ}$ angle, but for the positions of $45^{\circ}$ angle (d/D=10~11.67), $60^{\circ}$ & $75^{\circ}$ angle, the heat transfer coefficients in the case of using supplementary water are smaller than simple jet (S/D=0).

• Environmental Engineering Research
• /
• 제21권3호
• /
• pp.311-317
• /
• 2016

A new type of biofilter packed with composite carriers was designed for tertiary denitrification of the secondary effluent with removal of both oxidized nitrogen and suspended solids (SS). At the empty bed residence time of 15 min and organic carbon to nitrate nitrogen ($C/NO_3-N$) ratios of 2, 1.5 and 1 g/g, the removal percentage of $NO_3-N$ was 67%, 58% and 36% in the ethanol biofilter, and was 61%, 43% and 26% in the acetate biofilter, respectively. The biofilters packed with composite carriers removed SS effectively, with the effluent turbidity in both biofilters of less than 3 NTU. During the operating cycle between the biofilter backwashings, the $NO_3-N$ removal percentage decreased initially after backwashing, and then gradually increased. Under $C/NO_3-N$ ratios of 2, 1.5 and 1 g/g, the $NO_3-N$ reduction rate was 1.75, 1.04 and $0.68g/m^2/d$ in the ethanol biofilter, and was 1.56, 1.07 and $0.76g/m^2/d$ in the acetate biofilter, respectively. In addition, during denitrification, the ratio of the consumed chemical oxygen demand to the removed $NO_3-N$ was 5.06-8.23 g/g in the ethanol biofilter, and was 4.26-8.6 g/g in the acetate biofilter.