• Journal of Radiation Protection and Research
• /
• v.26 no.2
• /
• pp.93-99
• /
• 2001

Voxel head phantom for overcoming the limitation of mathematical phantom in depleting anatomical details was constructed and example dose calculation for BNCT was performed. The repeated structure algorithm of the general purpose Monte Carlo code, MCNP4B was applied for yokel Monte Carlo calculation. Simple binary yokel phantom and combinatorial geometry phantom composed of two materials were constructed for validating the voxel Monte Carlo calculation system. The tomographic images of VHP man provided by NLM(National Library of Medicine) were segmented and indexed to construct yokel head phantom. Comparison of doses for broad parallel gamma and neutron beams in AP and PA directions showed decrease of brain dose due to the attenuation of neutron in eye balls in case of yokel head phantom. The spherical tumor volume with diameter, 5cm was defined in the center of brain for BNCT dose calculation in which accurate 3 dimensional dose calculation is essential. As a result of BNCT dose calculation for downward neutron beam of 10keV and 40keV, the tumor dose is about doubled when boron concentration ratio between the tumor to the normal tissue is $30{\mu}g/g$ to $3{\mu}g/g$. This study established the voxel Monte Carlo calculation system and suggested the feasibility of precise dose calculation in therapeutic radiology.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.573-582
• /
• 2010

In this paper, X-band transceiver for high resolution wideband SAR systems is designed and fabricated. Also as a technique for enhancing the performance, error compensation algorithm is presented. The transceiver for SAR system is composed of transmitter, receiver, switch matrix and frequency generator. The receiver especially has 2 channel mono-pulse structure for ground moving target indication. The transceiver is able to provide the deramping signal for high resolution mode and select the receive bandwidth for receiving according to the operation mode. The transceiver had over 300 MHz bandwidth in X-band and 13.3 dBm output power which is appropriate to drive the T/R module. The receiver gain and noise figure was 39 dB and 3.96 dB respectively. The receive dynamic range was 30 dB and amplitude imbalance and phase imbalance of I/Q channel was ${\pm}$0.38 dBm and ${\pm}$3.47 degree respectively. The transceiver meets the required electrical performances through the individual tests. This paper shows the pulse error term depending on SAR performance was analyzed and range IRF was enhanced by applying the compensation technique.

• Korean Journal of Community Nutrition
• /
• v.10 no.5
• /
• pp.592-602
• /
• 2005

This study was conducted to compare nutrient intakes regarding stages of change in dietary fiber increasing behavior. Subjects were consisted of healthy 383 college students (2S0 females and 133 males) in Kyunggi-Do. Stages of change classified by an algorithm based on 6 items were designed each subjects into one of the 5 stages: precontemplation (PC), contemplation (CO), preparation (PR), action (AC), maintenance (MA). Nutrient intakes were assessed by 24-hr recall method. Regarding the S stages of changes, PR stage comprised the largest group $(39.4\%)$, followed by AC $(33.7\%)$, MA$(14.6\%)$, PC$(7.6\%)$, CO$(34.7\%)$. Female were more belong to either AC or MA. The higher stage of change in dietary fiber increasing behavior, the higher self-efficacy. In all male and female, there were no differences in energy, protein, monounsaturated fatty acids, polyunsaturated fatty acids and cholesterol intakes across the 5 stages. But, fiber, postassuim (K), vitamin A and vitamin C intakes of AC or MA were higer than those of PC, CO and PR $Energy\%$ from fat of $PR(25.4\~26.5\%)$ was higher than $20\%$, and those of AC and MA was lower than the other groups. Dietary P/S and ${\varepsilon}6/{\varepsilon}$ 3 ratios of AC and MA were similar to the recommended ratio. Female of PR had the most total saturated fat and palmitic acid and those of MA had the least. Male of PR had the least $\alpha-LNA\;({\varepsilon}3)$ and total ${\varepsilon}3$ fatty acids and those of MA had the most. In male and female in AC or MA, fiber and K intakes from breakfast, dinner and snack and vitamin C intakes from all meals were higher than those of the other stages. These results of our study confirm differences in stages of change in fiber intake in terms of nutritional status. To have lower $energy\%$ from fat, higher intakes of K, fiber and vitamins, desirable ratio of dietary fatty acids, it needs consistent nutritional education leading to the AC or MA of fiber increasing behavior.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.609-614
• /
• 2009

Sesame oil was sometimes replaced by mixed oil due to high price in Korean market. To find out authentic sesame oil, electronic nose (E-nose) based on mass spectrometer system was used. Sesame oil was blended with perilla oil at the ratio of 97:3, 94:6, 91:9, 88:12 and 85:15, respectively. Intensities of each fragment from sesame oil by E-nose based on MS were completely different from those of perilla oil. The obtained data was used for discriminant function analysis. For quantitative analysis, the partial least square algorithm was used. The added concentration of perilla oil to sesame oil was correlated with discriminant function first score (DF1) and second score (DF2). From this relationship it could be found out how much perilla oil added. DFA plot indicated a significant separation of pure sesame oil and pure perilla oil. The different geographical origin of sesame oil was used for blending with perilla oil were closed to that of sesame oil. Korean sesame oil mixture and Indian sesame oil one were well separated. And the correlation between mixing ratios and DF1 values was found at the ratio of 97:3, 91:9, and 85:15 (SE vs PE oil), respectively. But the added concentration of perilla oil to sesame oil was correlated with discriminant function first score (DF1). E-nose based on MS system could be used as an efficient method for purity of oil quality.

• Journal of the Korean Society of Radiology
• /
• v.7 no.3
• /
• pp.181-189
• /
• 2013

The optimum exposure parameters are found when examined using the automatic mode in FFDM. improve the image quality by applying denoising algorithm and propose methods to reduce AGD(Average Grandular Dose) a patient can receive. For the experiment, Nuclear Associates Model 18-222 phantom was the used, and the entrance dose and AGD were measured. And then, Signal, Noise, SNR and FOM(Figure of Merit) were measured, compared and analyzed image denoising before and after. As the experiment result, first, SNR was the highest at Mo/Mo 23kVp and W/Rh 35kvp was the lowest for the average glandular dose. It showed to use 28kVp of W/Rh to be the best through the result of FOM. SNR was the highest at Mo/Mo 23kVp(image denoising), and it showed to W/Rh and 28kVp to be the best in the FOM result which AGD was considered at the same time. By the image denoising, it is possible to reduce noise while maintain important information in the image.

• Proceedings of the Technology Innovation Conference
• /
• 2009.02a
• /
• pp.313-332
• /
• 2009

본 연구에서는 국가의 연구개발활동조사에서 기업연구개발활동 통계에 대한 효과적인 산출방법을 제시하고자 하였다. 이를 위하여 국내 외 연구개발 통계방법을 조사한 후 이를 토대로 우리나라에서 기업연구개발활동에 대한 자료의 수집 및 분석에 대한 개선방안을 제시하였다. 대부분의 국가에서는 대기업은 전수조사, 소규모 기업은 표본조사를 수행하고 있으나, 우리나라에서는 연구소 등록법인에 대하여 전수조사를 행하고 있다. 전수조사는 비용이 많이 들고 비 표본오차로 인하여 모집단에 대한 체계적인 추정이 불가능하다는 문제점이 있다. 현재 산업기술진흥협회에 등록된 연구기관의 수가 20,000개를 넘어서고 있어 전수조사는 한계에 다다른 것으로 생각되어 표본조사 도입에 대한 타당성과 방법론을 중점적으로 검토하였다. 먼저, 표본조사의 타당성을 평가하기 위하여 현재 전수조사를 통해 수집된 자료를 이용하여 표본조사를 수행한 결과를 비교 분석하였다. 산업별(24개), 그룹별(8개)로 구분하여 216개 셀별로 모집단수/표본수를 곱하여 산정 (셀별추정법)한 결과, 전수 통계치와 거의 동일하게 나타났다. 따라서, 산업별, 그룹별로 세분하여 모집단수/표본수를 곱하여 추정하는 셀별추정법이 타당한 것으로 평가할 수 있다. 이상의 분석결과를 토대로 새로운 조사설계방안을 제시하면 다음과 같다. 직전연도 조사기업은 직전연도 연구개발비 수준과 기업종류(대기업, 벤처기업, 중소기업), 그리고 산업에 따라 셀을 분할한다. 대기업, 연구개발비 수준이 높은 기업 등 주요한 셀에 대하여는 전수조사를 실시한다. 나머지 셀에 대하여는 각 셀별 연구개발지출의 분포가 동질적이기 때문에 표본 추출방법은 단순임의추출법(SRS)을 사용한다. 다만 전년도 미계상된(또는 미포함된) 기업에 대하여는 신규 대형 연구소 진입 등을 고려하여 규모비례확률추출법(PPS)을 고려하는 것이 바람직할 것으로 판단된다. 일부 기업들이 특정 항목에 대한 자료를 제공하지 않는 항목무응답의 경우, 누락된 자료에 대하여는 대체기법(Imputation Algorithm)에 따라 이를 추정한다. 이러한 표본조사방법은 전수조사에서 발생하는 비 표본오차를 해소하고, 자료수집비용 및 소규모기업의 행정적 부담을 경감할 수 있다는 장점이 있다. 향후 연구에서는 좀 더 구체적인 조사방법론을 강구할 필요가 있으며, 이와 함께, 연구개발에 대한 다양한 측면의 정보를 수집하기 위해 새로운 설문지를 개발할 필요성이 있다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.99-100
• /
• 2004

AMBIDEXTER-NEC의 천이노심은 $^{Nat}Th$과 $^{Nat}U$의 주입만으로 전 출력의 Break-even 노심에 도달하기위한 중간 단계이다. 선행연구에서 수행한 전 출력노심인 평형노심의 핵종수밀도에 도달하기 위해서 평형노심에서의 기저물질, 잠재핵분열성물질, 핵분열물질의 수밀도를 각 SEU-기반, Pu-기반, ADS-기반에서 그대로 유지하여 초기노심을 구성하였다. 또 각 시나리오에 대해 최대첨두출력과 원자로의 안전성을 고려해 Excess Reactivity를 5mk 내에서 초기노심을 결정하였다. 각 노심은 주 핵분열성물질 $^{235}U$, $^{239}Pu$ 및 $^{233}U$의 핵반응단면적 특성에 따라 평균 전환율이 각각 0.95, 0.83 및 1 .21 로서 핵연료물질의 적절한 선택만으로도 전환로, 연소로 및 증식로로 설계할 수 있음을 보여준다. 이러한 $Th/^{233}U$, U/Pu 핵연료주기를 사용하는 AMBIDEXTER-NEC 용융염핵연료 원자로의 초기노심에서 시작한 천이노심은 평형노심에장전할 충분한 $^{233}U$ 양을 확보해야 하므로 천이노심의 목표는 평형노심 $^{233}U$의 요구량에 최소한의 기간에 가장 적은 외부주입을 통해 도달하는 것이다. 천이노심에서 임계가 유지되는 AMBIDEXTER-NEC 원자로시스템의 3군 핵종변환 코드인 HELIOS-SQUID-AMBIBURN 체제를 개발하였고 그림 1.에 나타내었다. 이 알고리즘은 각 초기노심 중원소의 미시단면적, 중원소를 제외한 원소들의 거시단면적, 임계도를 만족하는 중성자속 및 외부주입율을 계산하여 SQUID 및 AMBIBURN 입력자료를 제공한다. 또한 일정시간 중원소의 핵종농도, 외부주입율과 중성자속이 일정하다는 가정 하 에 반복수행 하고 SEU-기반과 Pu-기반의 경우에는 각각 핵변환을 거쳐 재순환되는 $^{233}U$ 및 $^{239}Pu$의 양을 바로 주입하는 최대재순환 경우와 평형노심 요구 장전량에 이를 때까지 시설 내 저장하는 최소재순환 경우로 상황을 모사하였다. 그림 2 는 각 시나리오별 초기노심에서부터 200FPD까지 단위 용융염 체적당 $^{233}U$의 수밀도 시간변화를 나타낸 것이다. 그림을 보면 50일 이후부터는 수밀도의 변화가 일정한 기울기를 보이고 있고 재처리공정에서 $^{233}Pa$를 분리하는 최소재순환의 경우에는 최대재순환보다 2-3%정도에 지나지않아 그림에서 나타내지않았다. SEU-기반 및 Pu-기반에서 $^{233}U$의 증가율이 각각 2.54E+13, 2.81E+13 #/cc/d 로 Pu 기반이 조금 더 큰 증가율을 나타내고 있지만 평형노심 농도 1.04E+20 #/cc/d 에 도달하기 위해서는 두 경우 모두 매우 긴 시간이 걸릴 것을 예상할 수 있다. 요컨대 250MWth AMBIDEXTER-NEC가 평형노심을 이루기 위해 필요로 하는 $^{233}U$을 생산하는데 제안한 SEU-기반, Pu-기반 시나리오는 천이노심주기기간이 전형적인 원자로 수명 3-40년 보다 매우 큰 것으로 나타났다. 따라서 장전될 $^{233}U$의 확보를 위한 최적옵션은 초기노심부터 ADS와 같은 외부생산시설로부터 전량을 공급 받아 운전하는 것이라 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5151-5156
• /
• 2010

In the previous researches for storm sewer design, the flow paths in overall network were determined to minimize the construction cost and then, it was not considered the superposition effect of runoff hydrographs in the sewer pipes. However, in this research, the flow paths are determined considering the superposition effect to reduce the inundation risk by controlling and distributing the flows in the sewer pipes. This is accomplished by distributing the inflows that enter into each junction by changing the flow path in which pipes are connected between junctions. In this paper, the superposition effect and peak outflows at outlet were analyzed considering the changes of the flow paths in the sewer network. Then, the flow paths are determined using genetic algorithm and the objective function is to minimize the peak outflow at outlet. As the applied result for the sample sewer network, the difference between maximum and minimum peak outflows which are caused by the change of flow path was about 5.6% for the design rainfall event of 10 years frequency with 30 min. duration. Also, the typhoon 'Rusa' which occurred at 2002 was applied to verify the reduction of inundation risk for the excessive rainfall, and then, the amount of overflows was reduced to about 31%.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.671-678
• /
• 2005

In this paper, we suggest an algorithm that allows us to extract the important obbject from motion pictures and then replace the background with arbitrary images. The suggested technique can be used not only for protecting privacy and reducing the size of data to be transferred by removing the background of each frame, but also for replacing the background with user-selected image in video communication systems including mobile phones. Because of the relatively large size of image data, digital image processing usually takes much of the resources like memory and CPU. This can cause trouble especially for mobile video phones which typically have restricted resources. In our experiments, we could reduce the requirements of time and memory for processing the images by restricting the search area to the vicinity of major object's contour found in the previous frame based on the fact that the movement of major object is not wide or rapid in general. Specifically, we detected edges and used the edge image of the initial frame to locate candidate-object areas. Then, on the located areas, we computed the difference image between adjacent frames and used it to determine and trace the major object that might be moving. And then we computed the contour of the major object and used it to separate major object from the background. We could successfully separate major object from the background and replate the background with arbitrary images.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.263-273
• /
• 2019

South Korea's OF cable is reaching its expected design life of 30 years, and as a result, the risk of failure is increasing. Therefore, it is necessary to diagnose the long-term operating OF cables through accurate diagnosis at the right time to prevent the failure. Currently, the KEPCO periodically conducts DGA. However, the gas found in DGA is caused by oil deterioration as well as insulation paper. Therefore, the analysis of the degree of polymerization and furan compounds which is an evaluation of insulation paper considered to be the life of OF cables is required. In addition, the results of the evaluation of deterioration of insulation paper need to be checked for correlation with the results of DGA. In this study, DGA carried out through GC, the degree of polymerization was analyzed using an automatic viscometer, and HPLC was used to detect the furan compounds. In addition, the obtained results were applied to the SVM technique, which was recently introduced to determine abnormalities in OF cable. And the results which were accurate and reliable were obtained.