• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.585-592
• /
• 2016

Visualization was done by using $CH^*$ chemiluminescence images and PMT measurements in order to understand the origin of fluctuating pressure and chemical luminosity at about 500 Hz frequency even in stable combustion, which was observed in recent experimental tests, and to find the physical correlation leading to Low Frequency Instability(LFI) in terms of phase angle. In stable combustion, chemical reactions are distributed along the shear layer flow showing a negative coupling(about 180 degree in phase angle) with combustion pressure. However, phase difference is shifted to a positive coupling showing less than 90 degree in unstable case. Also a periodic change in the distribution of chemical reactions is observed along with local flame extinction and the appearance of big scale vortex flow. In the transition to LFI, local flame extinction and small vortex flow start to appear in a row. As seen in the bluff body wake in reactive flow, the periodic appearance of vortex flow seems to share the same physical process of BVK(Bernard Von Karman) instability generation. Thus, the appearance of local extinction in 500 Hz fluctuations is gradually amplified to complete extinctions of about 20 Hz, and it leads into LFI.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.94-94
• /
• 2023

유역에서의 홍수를 예측하기 위한 다양한 강우-유출 모형들이 개발되어 사용되고 있다. 개념적 강우-유출 모형들은 신뢰성과 적용성이 높아 실무에서 널리 활용되어왔으나, 강우-유출 과정을 단순화하여 고려하므로 유출예측의 정확도에 한계가 있다. 또한 모형의 매개변수에 여러 불확실성이 존재하므로 충분한 양의 관측자료를 사용한 보정 작업이 필요하다. 물리적 강우-유출 모형들은 유출예측 결과가 비교적 물리적으로 정확하다는 장점이 있지만, 높은 계산 비용 및 수치적 불안정성으로 인하여 실무에의 적용이 힘들다. 본 연구에서는 홍수 예측의 정확도와 효율성을 모두 확보할 수 있는 하이브리드 기법을 개발하였다. 본 연구에서 개발한 기법은 물리적 모형인 동역학파 모형과 개념적 모형인 순간단위도 모형, 그리고 딥러닝 모형을 결합하여 사용하는 기법이다. 유역의 조도계수 및 지형을 활용한 동역학파 시뮬레이션을 수행하였으며, 동역학파 시뮬레이션 결과 및 멱함수로 나타내어지는 비선형적 강우-유출 관계를 이용하여 유역의 순간단위도를 유도였다. 또한, 딥러닝 모형인 LSTM 모형을 활용하여 강우손실 매개변수를 추정하였으며, 이를 이용하여 강우손실을 계산한 후 유효강우주상도를 산정하였다. 그리고 유역 출구에서의 홍수수문곡선은 유효강우주상도와 순간단위도를 활용한 회선적분을 통해 예측되었다. 본 연구에서 개발한 기법을 시험유역 및 자연유역에서의 홍수 예측에 적용해보았으며, 예측 결과는 NSE=0.55-0.90, R²=0.67-0.95의 높은 정확도를 보였다. 본 연구에서 유도하는 순간단위도는 한 유역에서 유일하지 않으며, 유효 강우강도의 함수이므로 홍수 예측에 비선형적 강우-유출 관계를 고려할 수 있으며, 수많은 유효 강우강도에 대한 순간단위도들은 멱함수를 이용하여 순간적으로 유도될 수 있다. 또한, 유역의 강우 특성이나 지표면의 토양수분, 식생과 같은 특성을 딥러닝 모형을 통해 고려함으로써 강우 손실 산정의 불확실성을 줄일 수 있다. 또한, 순간단위도 유도를 위한 기초작업인 동역학파 시뮬레이션은 유역의 지형과 조도계수만을 필요로 하므로 미계측 유역에의 적용이 유리하다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.252-256
• /
• 2001

본 논문에서는 IMT-2000 기지국용 2단 저잡음 증폭기를 설계했다. 잡음지수 특성이 뛰어난 HP사의 PHEMT 소자인 ATF-35143을 사용하였고 능동소자의 바이어스는 $V_{ds}$ 가 3 v $I_{d}$을 30mA로 설정했다. 첫 단은 최소잡음 지수에 중점을 두고 설계했고 둘째 단은 이득에 초점을 맞추어 설계했다. 입출력 정재파 비를 줄이기 위해서 전체증폭기의 앞단과 뒷단에 삽입손실이 0.2dB인 X503 SMT 90도 하이브리드 커플러를 설치 했다. 제작을 위해 기판은 두께 0.76mm이고 비유전율 4.2의 FR-4를 사용했다. 설계된 저잡음 증폭기의 특성은 주파수대역 1.92GHz～1.98GHz에서 잡음지수 0.45dB, 입출력 정재파 비 1.2이하, 이득은 32dB이상의 특성을 보였다.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.83-90
• /
• 2008

EThe digitalized image information has various resolution, and it has been developed for several technologies to resize image depending on user's requests and applications. Recently the algorithm using edge information for good image/video quality on up-sampling was introduced, and the pre-processing procedure is required for edge extraction. Than, the predicted direction in intra prediction used in H.264/AVC has the similarity up to 80% for the edge information, so I propose the image up-sampling method using edge information. In proposed method, the image quality is similar to result of adapting n'th kernel. and the method reduces the number of calculation by about 50%.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.421-426
• /
• 2012

The effect of synthesis conditions such as various organic material and composition of organic-inorganic material in ozone resistance and surface characteristic of ultraviolet cured organic-inorganic hybrid coating film has been investigated. Organic-inorganic hybrid coating solution was prepared using tetraethoxysilane (TEOS), silane coupling agent methacryloyloxypropyltrimethoxysilane (MPTMS), 2,2,2-trifluoroethylmethacrylate, and various organic materials with acrylate group, bar-coated on substrates using applicator and densified by UV-curing. It was found that ozone resistance and surface hardness of the coating film was increased with contents of TEOS. It was also found that ozone resistance of coating film was increased with contents of 2,2,2-trifluoroethylmethacrylate. On the other hand, surface hardness was decreased with increase of 2,2,2-trifluoroethylmethacrylate. In addition, Surface hardness of coating film was increased with the addition of aliphatic urethane acrylate. It was also found that the transmittance of coating films was not influenced by content of TEOS and 2,2,2-trifluoroethylmethacrylate. In addition, the coating film exhibited high transmittance of above 90%.

• Journal of East Asia Management
• /
• v.5 no.1
• /
• pp.75-90
• /
• 2024

About 100 years after the start of mass production by American car maker Ford in 1913, the automobile industry has come to a major transformation in 100 years. In this transformation period, automakers are facing the biggest challenge of converting power sources, the basis of automobiles, from existing internal combustion engines to electric vehicles. Hybrid vehicles have been released in Japan since the late 1990s, and changes in automobile power sources have occurred early. In order to gain global leadership in hybrid vehicles, Japanese automakers and the Japanese government joined forces to promote the growth of the domestic hybrid vehicle market. The government has implemented a policy to substantially subsidize the high price of hybrid cars compared to internal combustion engine cars by providing purchase subsidies and tax benefits to buyers. Toyota has increased its line-up of hybrid cars around the Prius and has further strengthened communication with customers for the sale of hybrid vehicles. As a result of continuing these efforts for about 20 years, the percentage of Japan's hybrid vehicle market in 2022 reached 51% for passenger cars. Recently, each country has been setting and promoting aggressive goals for electric vehicles that require a wider range of physical and institutional infrastructure than hybrid vehicles. This study aims to assess the growth of electric vehicles by looking at the trend of hybrid vehicles and how they've been distributed in the Japanese market.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1759-1764
• /
• 2015

In this paper, we considered a design method of a circular polarization (CP) antenna for UHF (ultra high frequency) RFID (Radio Frequency IDentification) readers. The antenna is a dual-fed circular microstrip patch which produces right-handed CP. Quadrature hybrid coupler is used for dual feeding. The outputs of the coupler and circular patch are connected through copper wires, and the inductive reactance produced by the connecting wires is compensated by a ring-shaped slot inserted inside the circular patch. The effects of the geometrical parameters of the proposed antenna on the antenna performance are examined, and the parameters are adjusted to be suitable for the operation in North American UHF RFID band (902-928 MHz), which includes domestic UHF RFID band. The antenna is fabricated, and the experiment results reveal a frequency band of 854-993 MHz for a voltage standing wave ratio < 2. The fabricated antenna is connected to a commercial RFID reader, and it showed a good performance of tag identification.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.491-498
• /
• 2009

We studied to develop high-efficiency removal system of odor and VOCs(Volatile Organic Compounds) from environmental infrastructure facilities and oil refineries, painting facilities and so on. It can replace RTO and RCO. We tried an removal experiment for VOCs (toluene, xylene, benzene, MEK(methyl ethyl ketone), ethanol, formalin etc. and odor compounds (hydrogen sulfide, etc.). In process, as pre-treatment we used the scrubber with vortex flow (Multi-scrone) to remove the hydrophilic VOCs and as post-treatment, used fibrous bio-filter to remove the hydrophobic VOCs. This hybrid system remove with high efficiency both the hydrophilic VOCs and hydrophobic VOCs. And we tried to make this system to be compact. In experiment using Multi-scrone, contact time is 2~3 seconds and absorption scrubbing water is diaphragm-type electrolysis water. hydrophilic VOCs like ethanol and relatively hydrophilic odor compounds like hydrogen sulfide is excellent, these substances has been removed almost completely, respectively 95~99%, 93~97%. And for MEK, formalin also Showed a high removal efficiency, respectively 78~90%, 72~85%. But in experiment using Multi-scrone, the hydrophobic VOCs like BTX showed a low removal efficiency, respectively 16~22%, 12~18%, 8~16%. In hydrophobic VOCs, toluene removal experiment using fibrous bio-filter, early efficiency was low but after 10days, adaptation period showed high efficiency 85~95%. but in the mixed phase, toluene and MEK efficiency reduced 5~10%. this show microorganism treat first MEK easy to remove. The removal efficiency for MEK using the fibrous biofilter was stable, 80~92%. This hybrid system is also high economical efficiency for RTO. This system reduce more than 50% the cost of equipment and maintenance. As a result, we expect this technology is in the limelight as high efficiency treatment of VOCs in mid-low price.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.461-475
• /
• 2006

In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.277-282
• /
• 2010

The study is to verify non-uniform dose distribution in Field-In-Field (FIF) technique using two-dimensional ionization chamber (MatriXX, Wellhofer Dosimetrie, Germany) for breast tangential irradiation. The MatriXX and an inverse planning system (Eclipse, ver 6.5, Varian, Palo Alto, USA) were used. Hybrid plans were made from the original twenty patients plans. To verify the non-uniform dose distribution in FIF technique, each portal prescribed doses (90 cGy) was delivered to the MatriXX. The measured doses on the MatriXX were compared to the planned doses. The quantitative analyses were done with a commercial analyzing tool (OmniPro IMRT, ver. 1.4, Wellhofer Dosimetrie, Germany). The delivered doses at the normalization points were different to average 1.6% between the calculated and the measured. In analysis of line profiles, there were some differences of 1.3-5.5% (Avg: 2.4%), 0.9-3.9% (Avg: 2.5%) in longitudinal and transverse planes respectively. For the gamma index (criteria: 3 mm, 3%) analyses, there were shown that 90.23-99.69% (avg: 95.11%, std: 2.81) for acceptable range ($\gamma$-index $\geq$ 1) through the twenty patients cases. In conclusion, through our study, we have confirmed the availability of the FIF technique by comparing the calculated with the measured using MatriXX. In the future, various clinical applications of the FIF techniques would be good trials for better treatment results.