• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.105-110
• /
• 2012

In this paper, A planar UWB antenna with notched WLAN band, 802.11a band (5.15 ~ 5.825GHz), by using slot and slit is designed by using CST Microwave Studio. The notched bandwidth can be controlled by the length and width of the slot and slit in the patch and ground plane and it's radiation characteristics are examined through the experiments. The bandwidth based on the -10dB return loss level can be covered the full UWB band (3.1 ~ 10.6GHz) with a notched WLAN band (5.147 ~ 5.83GHz). Also, the experimental radiation pattern is almost omnidirectional in the H-plane.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.691-692
• /
• 2016

본 논문은 802.11a 무선 랜용 5.25-GHz BiCMOS 저 잡음 증폭기를 제안한다. 이러한 회로는 1볼트 전원에서 동작하며, 저 전압 전원 공급에서도 높은 전압 이득을 가지도록 설계하였다. 제안한 회로는 $0.18{\mu}m$ SiGe HBT BiCMOS로 설계되어 있다. 저 전압 및 저 전력 동작을 위해 바이어스 회로는 밴드 갭 참조 (band-gap reference circuit) 바이어스 회로를 사용하였다. 제안한 회로는 최근 발표된 연구결과에 비해 높은 전압이득, 낮은 잡음지수 및 작은 칩 크기 특성을 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1004-1013
• /
• 2012

The legacy voice broadcast systems are used to broadcast the voice over an entire space or a specific zone. these broadcast systems generate unnecessary noise and waste of resources. In this paper, we propose a ubiquitous voice message broadcast system called uPaging, by combining the technique of location-awareness and the voice message delivery service in ubiquitous sensor network environment. In uPaging system, the wire/wireless hybrid network is used to implement the network system. Also, in order to actualize the location-awareness service, we use the Bidirectional Location ID-Exchange protocol was suggested by our previous research. the uPaging system can deliver the voice to a selected user or the location in which the user is present by this location awareness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1195-1200
• /
• 2007

This paper describes indoor location estimation intelligent robot. Indoor location estimation function using RSSI based indoor location estimation system and wireless sensor networks were implemented in the robot. Spartan III(Xilinx, U.S.A.) was used as a main control device in the mobile robot and the current direction data was collected in the indoor location estimation system. The data was transferred to the wireless sensor network node attached to the mobile robot through Zigbee/IEEE 802.15.4, a wireless communication. After receiving it, with the data of magnetic compass the node is aware of and senses the direction the robot head for and the robot moves to its destination. Indoor location estimation intelligent robot is can be moved efficiently and actively without obstacle on flat ground to the appointment position by user.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.18-23
• /
• 2008

This paper describes development of real-time condition monitoring system to observe state of a container crane in a port. To analyze the state of a crane, the strength and the direction of wind are measured with sensors along with the load resulted a crane at the moment. The measured signals are processed by especially developed conditioning board and converted into digital data. Measured data are analyzed to define the state of the crane at an indicator. For transmission of these data to the indicator, we implemented wireless sensor network based on IEEE 802.15.4 MAC(Media Access Control) protocol and Bluetooth network protocol. To extend the networking distance between the indicator and sensor nodes, the shortest path routing algorithm was applied for WSN(Wireless Sensor Network) networks. The indicator sends the state information of the crane to monitoring server through IEEE 802.11 b wireless LAN(Local Area Network). Monitoring server decides whether alarm should be issued or not. The performance of developed WSN and Bluetooth network were evaluated and analyzed in terms of communication delay and throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1087-1094
• /
• 2007

In this paper, we propose a new peak-to-average power ratio (PAPR) reduction scheme of orthogonal frequency division multiplexing (OFDM) system, called a modified selected mapping (SLM) scheme, which considerably reduces the computational complexity with keeping the similar PAPR reduction performance compared with the conventional SLM scheme. The proposed scheme is analytically and numerically evaluated for the OFDM system specified in the IEEE 802.16 standard. For the OFDM system with 2048 subcarriers, the proposed scheme with 4 binary phase sequences can reduce the complex multiplications by 63.5% with the similar PAPR reduction compared with the SLM scheme with 16 binary phase sequences.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.5
• /
• pp.1-11
• /
• 2008

Wireless Sensor Networks is applied to improvement of life convenience or service like U-City as well as environment pollution, tunnel and structural health monitoring, storm, and earthquake diagnostic system. To increase the usability of sensor data and applicability, mobile devices and their facilities allow the applications of sensor networks to give mobile users and actuators the results of event detection at anytime and anywhere. In this paper, we present MUSNEMO(Multi-sensor centric Ubiquitous Smart sensor NEtwork using Mobile devices) developed system for providing more efficient and valuable information services with a variety of mobile devices and network camera integrated to WSN. Our system is performed based on IEEE 802.15.4 protocol stack. To validate system usability, we built sensor network environments where were equipped with five application sensors such magnetic, photodiode, microphone, motion and vibration. We also built and tested proposed MUSNEMO to provide a novel model for event detection systems with mobile framework.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.61-72
• /
• 2013

Next-generation ITS(Intelligent Transportation System) adopts WAVE(Wireless Access in Vehicular Environment) system which is capable of the bidirectional communication system in vehicular environments. u-Transportation system adopted WAVE communications system to show the optimal performance in terms of various services with regard to vehicle safety and traffic. In this paper, we introduce testbed of ubiquitous-Transportation system and its service. Then, we describe WAVE system for supporting next-generation ITS service. Also, we carried out tests in real road environments in order to verify communication functions of WAVE systems and its performance. We confirmed that our communication systems for supporting services meet the communication performance.

• Electronics and Telecommunications Trends
• /
• v.22 no.1 s.103
• /
• pp.114-118
• /
• 2007

국내외적으로 지능형 차량 및 텔레매틱스/ITS 연구 개발을 통해서 차량에 IT 기술 접목을 위한 노력을 가속화하고 있다. 우리나라의 경우 산업자원부가 미래 10대 전략품목으로 자동차 부분에서 지능형 차량을 선정하였으며, 정보통신부는 u-IT839의 핵심서비스로 텔레매틱스/ITS 서비스를 추진하고 있다. EU는 i2010 Flagship에서 intelligentcar initiative 프로젝트를 통해 지능형 차량 및 보안을 위한 전략 수립과 세부과제를 수행하고 있다. 또한, IEEE 802.11p/P1609(WAVE)와 ISO TC204/WG16CALM에서는 차량 통신 보안 및 서비스에 대해서 고려하고 있다. 현재 지능형 차량과 관련하여서는 다양한 사업 모델이 제시되고 있으며, 자동차 업계의 BM과 이동통신 업계의 AM이 동반 성장하고 있다. 본 기고문은 지능형 차량 및 텔레매틱스/ITS와 관련한 보안 기술 동향을 살펴본다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.11
• /
• pp.797-802
• /
• 2007

The effects of window cover on the performance of the plate type radiant cooling test system are studied. The cover materials tested are 2mm, 1mm, 0.7mm glass, Cokin 007 filter, and PVC film. The measurements are performed during the September nights of 2005 at the rooftop of the building in Seoul. The equivalent height of the building is about a building with twelve floors. The radiant cooling performance of the black painted and aluminum film coated plate are compared under no cover condition. Also the results are compared when the system has cover over the plate. In general, the covers reduce the radiant cooling temperature differences during the nighttime. Among these covers, the PVC film cover shows the best performance. In some cases, the plate with PVC film cover shows lower temperatures than the system without cover.