• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.752-759
• /
• 2010

The low power consumption is the most important design factor for the In-Body communication system of WBAN. The conventional PSSK (Phase-Silence-Shift-keying) modulation technique can be regarded as an extension from PSK modulation. And this PSSK has better power efficiency than PSK modulation, and higher spectral efficiency than FSK modulation. PSSK modulation is to transmit two orthogonal symbols. The transmission power can be lowered because the symbol rate in signal period becomes half. BER performance is improved because transmission power is lower and the modulation symbol distance is widened. In addition, PSSK preserve the low-power and increase the data rate than FSK. In this paper, we analyzed existing PSSK and like to propose a new PSPM (Phase-Shift-Position-Modulation) modulation scheme. This PSPM is evaluated in terms of considered bandwidth efficiency and BER performance, compared with the PSSK. This PSPM modulation method transmits the information data by both PSK symbol data and symbol position data, so that we can significantly improve the power efficiency. New proposed PSPM method could be very useful for the In-body communication that requires the most power efficient system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.2
• /
• pp.63-75
• /
• 1983

This paper has investigated and discussed the effects of multiple PSK signals upon an wideband FM signal in an intersystem interference environment between analog and digital radios. Using the derived approximate equation for the output haseband interference noise, the signal-to-interference noise power ratio(SNR) in the top channel baseband signal has been numerically calculated. The results are plotted in graphs as the functions of carrier-to-noise ratio(CNR), carrier-to interfer power ratio(CIR), and normalized carrier separation. From the results in this paper, one can know some optimu, or suitable, operating conditions(frequency allocation, bandwidth, and power, etc.) for an FM channel in the intersystemn interferences from digital PSK channels.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.11
• /
• pp.941-944
• /
• 2021

PCM/FM with a modulation index of 0.7 is widely used in the telemetry field. If the modulation index is slightly changed to 2/3, it can be interpreted as 3-PSK with a state number of 3 in phase transition trellis and can be received with a simple Viterbi decoder. As a result of computer simulation, the Eb/No performance in the AWGN channel is about 8.3 dB when the BER is 10^-5, which is close to the theoretical limit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.434-441
• /
• 2005

For LDPC decoding, received symbols are splitted bit by bit based using the received in-phase and quadrature components. The method of bit-splitting is affected on decoding performance because its method depend on distance over symbol constellation. Therefore this paper propose the bit split method using the sector information with sacrifice a little performance loss compared to Euclidean distance method. Futhermore DVB-S2 specification supports BC(Backward Compactible) mode which using the hierarchical modulation method, this paper also analyze the decoding performance according to deviation angle of 8PSK constellation for various LDPC coding rates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1769-1776
• /
• 2000

In this paper a new method is proposed to identify a modulation method in the case of unknown digitally modulated input signals. The proposed identification method is implemented with an artificial neural network which is based on characteristic feature extracted from the instantaneous amplitude the instantaneous phase and the instantaneous frequency of the input signals. The proposed method was simulated with 9 type signals (ASK2, FSK2, FSK4, PSK2, PSK4, PSK8, QAM8, QAM16) in a noisy communication environment. The results show that the artificial neural network can accurately recognize all kinds of patterns.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.89-92
• /
• 2001

In this paper, as a study of programmable software radio digital communication, we implemented ASK(Amplitude Shift Keying), FSK(Frequency Shift Keying), and PSK(Phase Shift Keying) modulation using programmable software(algorithm) of DSP(Digital Signal Processor). Moreover, it is possible to select one of those three modulation methods by realizing on single DSP. We adopted Motorola DSP56002 and Crystal CS4215(A/D and D/A converter) for our purpose. The DSP56002 is 24-bit and operates 20 MIPS at 40 MHz, and the CS4215 is 16-bit and supports the maximum 50 kHz sampling frequency.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.67-71
• /
• 2010

In this study, an algorithm for blind modulation detection in EDGE systems is presented. EDGE introduces an 8PSK modulation to provide high-speed data rates in addition to the existing GSM system. A transmitter may switch dynamically the modulation and coding schemes for transmission of data according to the channel quality. To decode the data correctly, the receiver has to detect using only training sequence which modulation is being used. Basically the property of one radio block composed of four bursts to detect effectively the modulation scheme even under severe conditions is used. More specifically, the reference value calculated for received burst is accumulated with previous reference value to minimize statistically the false detection probability in one radio block. Also each burst data having different modulation from the modulation of the fourth burst is set to zero to improve the decoding performance because the reference of the fourth burst has the highest reliability.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.366-374
• /
• 2007

In underwater wireless communication, needs for long distance communication using the high frequency are surpassing ones of short range communication by ultrasonic wave, and demands for transmitting and receiving various data such as voice or high resolution image data are increasing as well. In this work, we studied the effects on the real underwater communication depending on the difference of digital modulation methods. Simulation shows that only the performance of GMSK among many other PSK based modulation schemes(BPSK, QPSK, MSK, GMSK) is significant. Test condition simulates the oceanographic conditions along the 207-survey line, 15Km south of Busan and SNR is maintained 35dB or below. Simulated tests are composed of both transmitting image data($3{\times}10^5$ pixel, 4 bit per pixel) and voice communication($10^{-2}$BER, channel capacity of 1Kbps). Test results show that there are gain of about 7 seconds in transmission time in image transmission case, where channel capacity for BPSK, QPSK, and MSK and for GMSK were 65 Kbps and 45 Kbps, respectively and gain of about 8Km in distances in voice communication case.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1792-1799
• /
• 1990

Two cases of block coded phase/frequncy modulations are investigated. minimum Euclidean distances are calculated as the function of modulation index h and rotation angle \ulcorner in the cases of 2-FSK/4-PSK and 2-FSK/8-PSK. Method of signal set partitioning is described, especially for the case of 2-FSK/8-PSK. The results are compared with S.I. Sayegh's work and shown better performance. For example, with simple parity check and repetition codes, we can get coding gain of 3 dB in the case of 2-FSK/4-PSK with block length n=4. We get 5.33 dB in the case of 2-FSK/8-PSK with n=4. And it is believed that we can get higher coding gain with proper combinations of block code and n-FSK/m-PSK type channel signal constellations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.671-678
• /
• 2005

This paper proposed symbol rate method which does not require a priori knowledge on the symbol rate and simplified modulation identification method to classify BPSK, QPSK, 8PSK signal. In order to estimate the unknown symbol rate, sliding FFT and simple moving average to estimate the spectrum of the signals is utilized, and sliding window and decimation, LPF blcok to estimate the proper symbol rate is used. Although conventional modulation ID method must use SNR value as the test statistics, the receiver cannot estimate the SNR value since the receiver cannot know the modulation type at the start of communication, and bit resolution is high due to using nonlinear function such as log, cosh. Therefore, we proposed the simplified fixed SNR value method. The performance of symbol rate estimation and modulation ID is shown using Monte Carlo computer simulation. This paper show that symbol rate estimation also has good performance in low SNR, and proposed simplified fixed SNR method has almost equivalent performance compared to conventional method.